Biphenyl, polychlorinated

Ei ivironrr lent Absence of toxic compounds such as polychlorinated biphenyls (PCB s)... 

The aim of the first example is to look for polychlorinated biphenyls (PCB) for which C-NMR spectra, measured in deuterochloroform, as well as the partition coefficients between 1-octanol and water arc known. Since it is not reliable to per-... 

Figure 5-16. Structure editor of the CrossFire ComiTiander V6, showing the definition ofan atom list (consisting of hydrogen and chlorine atoms) for polychlorinated biphenyls.

The performance of SCWO for waste treatment has been demonstrated (15,16). In these studies, a broad number of refractory materials such as chlorinated solvents, polychlorinated biphenyls (PCBs), and pesticides were studied as a function of process parameters (17). The success of these early studies led to pilot studies which showed that chlorinated hydrocarbons, including 1,1,1-trichloroethane /7/-T5-6y,(9-chlorotoluene [95-49-8] and hexachlorocyclohexane, could be destroyed to greater than 99.99997, 99.998, and 99.9993%, respectively. In addition, no traces of organic material could be detected in the gaseous phase, which consisted of carbon dioxide and unreacted oxygen. The pilot unit had a capacity of 3 L/min of Hquid effluent and was operated for a maximum of 24 h. 

Solvent extraction followed by gas chromatographic analysis is used to determine paraffin wax antioxidants (qv), ie, butylated hydroxyanisole and butylated hydroxytoluene and other volatile materials. Trace amounts of chlorinated organic compounds, eg, polychlorinated biphenyls, can be deterrnined by using a gas chromatograph with an electron-capture detector (22). 

TSCA also addresses the problem of polychlorinated biphenyls (PCBs) and chlorinated fluorocarbons (CECs). EPA has developed regulations on the cleanup, handling, and disposal of PCBs. The manufacture and use of CECs has been banned for all but essential uses, in accordance with the Montreal Agreement, an international treaty on worldwide use of CECs. 

Common examples of compounds that are amenable to carbon adsorption are aromatics (benzene, toluene) and chlorinated organics (trichloroethylene, trichloroethane [71-55-6, 75 -(9(9-j5y, tetrachloroethylene, polychlorinated biphenyls (PCBs), DDT /T(9-77-77, pentachlorophenol [87-86-5J. Compounds that are not adsorbed effectively by carbon include ethanol [64-17-5], diethylene glycol [111-46-6], and numerous amines (butylamine [109-73-9, 13952-84-6, 75-64-9], triethanolamine [102-71-6], cyclohexylamine [108-91-8], hexamethylenediamine [108-91-8] (1). Wastewater concentrations that are suitable for carbon adsorption are generally less than 5000 mg/L. 

In earlier editions of the Eniyclopedia there have been articles covering the properties, manufacture, capacities, etc, of polychlorinated biphenyls (PCBs), chlorinated naphthalenes, benzene hexachloride, and chlorinated derivatives of cyclopentadiene. These materials are no longer in commercial use because of their toxicity. However, they stiU impact on the chemical industry because of residual environmental problems. Their toxicity and environmental impact are discussed (see Cm.OROCARBONSANDCm.OROHYDROCARBONS, TOXIC aromatics). 

BTEX Benzene, toluene, xylene PCB Polychlorinated biphenyl... 

SW-846, is used to measure emissions of semivolatile principal organic constituents. Method 0010 is designed to determine destruction and removal efficiency (DRE) of POHCs from incineration systems. The method involves a modification of the EPA Method 5 sampling train and may be used to determine particulate emission rates from stationary sources. The method is applied to semivolatile compounds, including polychlorinated biphenyls (PCBs), chlorinated dibenzodioxins and dibenzofurans, polycyclic organic matter, and other semivolatile organic compounds. 

---