Spectrometry absorption

One has seen that the number of individual components in a hydrocarbon cut increases rapidly with its boiling point. It is thereby out of the question to resolve such a cut to its individual components instead of the analysis by family given by mass spectrometry, one may prefer a distribution by type of carbon. This can be done by infrared absorption spectrometry which also has other applications in the petroleum industry. Another distribution is possible which describes a cut in tei ns of a set of structural patterns using nuclear magnetic resonance of hydrogen (or carbon) this can thus describe the average molecule in the fraction under study. 

Elemental Analysis Atomic absorption spectrometry X-Ray fluorescence spectrometry Plasma emission spectrometry... 

From J. A. Dean and T. C. Rains, Standard Solutions for Flame Spectrometry, in Flame Emission and Atomic Absorption Spectrometry, J. A. Dean and T. C. Rains (Eds.), Vol. 2, Chap. 13, Marcel Dekker, New York, 1971. 

Source Compiled from Parson, M. L. Major, S. Forster, A. R. Appl. Spectrosc. 1983,37, 411-418 Weltz, B. Atomic Absorption Spectrometry, VCH Deerfield Beach, FL, 1985. 

Allen, H. C. Brauers, T. Finlayson-Pitts, B. J. Illustrating Deviations in the Beer-Lambert Law in an Instrumental Analysis Laboratory Measuring Atmospheric Pollutants by Differential Optical Absorption Spectrometry, /. Chem. 

Trace metals in sea water are preconcentrated either by coprecipitating with Ee(OH)3 and recovering by dissolving the precipitate or by ion exchange. The concentrations of several trace metals are determined by standard additions using graphite furnace atomic absorption spectrometry. 

Rocha, E. R. P. Nobrega, J. A. Effects of Solution Physical Properties on Copper and Chromium Signals in Plame Atomic Absorption Spectrometry, /. Chem. Educ. 1996, 73, 982-984. 

L Vov, B. V. Graphite Furnace Atomic Absorption Spectrometry, AuflZ. Chem. 1991, 63, 924A-931A. 

Stolzberg, R. J. Screening and Sequential Experimentation Simulations and Elame Atomic Absorption Spectrometry Experiments, /. Chem. Educ. 1997, 74, 216-220. 

Colorimetric and Fluorimetric Analysis. The functional groups of amino acids exhibit Htde absorption of uv light from 210 to 340 nm where uv absorption spectrometry is most conveniently conducted. Thus color or fluorescence formation reactions are employed for amino acid detection (128). 

Highly sensitive iastmmental techniques, such as x-ray fluorescence, atomic absorption spectrometry, and iaductively coupled plasma optical emission spectrometry, have wide appHcation for the analysis of silver ia a multitude of materials. In order to minimize the effects of various matrices ia which silver may exist, samples are treated with perchloric or nitric acid. Direct-aspiration atomic absorption (25) and iaductively coupled plasma (26) have silver detection limits of 10 and 7 l-lg/L, respectively. The use of a graphic furnace ia an atomic absorption spectrograph lowers the silver detection limit to 0.2 l-ig/L. 

Z. Pang, Elowinjection Atomic Absorption Spectrometry,Wiley Sons, Inc., New York, 1995. 

Numerous methods have been pubUshed for the determination of trace amounts of tellurium (33—42). Instmmental analytical methods (qv) used to determine trace amounts of tellurium include atomic absorption spectrometry, flame, graphite furnace, and hydride generation inductively coupled argon plasma optical emission spectrometry inductively coupled plasma mass spectrometry neutron activation analysis and spectrophotometry (see Mass spectrometry Spectroscopy, optical). Other instmmental methods include polarography, potentiometry, emission spectroscopy, x-ray diffraction, and x-ray fluorescence. 

Miscellaneous. Trace analyses have been performed for a variety of other materials. Table 9 Hsts some uses of electrothermal atomic absorption spectrometry (etaas) for determination of trace amounts of elements in a variety of matrices. The appHcations of icp /ms to geological and biological materials include the following (165) ... 

The methods of choice for beryUium oxide in beryUium metal are inert gas fusion and fast neutron activation. In the inert gas fusion technique, the sample is fused with nickel metal in a graphite cmcible under a stream of helium or argon. BeryUium oxide is reduced, and the evolved carbon monoxide is measured by infrared absorption spectrometry. BeryUium nitride decomposes under the same fusion conditions and may be determined by measurement of the evolved nitrogen. Oxygen may also be determined by activation with 14 MeV neutrons (20). The only significant interferents in the neutron activation technique are fluorine and boron, which are seldom encountered in beryUium metal samples. 

Total carbon in beryUium is determined by combustion of the sample, along with an accelerator mixture of tin, iron, and copper, in a stream of oxygen (15,16). The evolved carbon dioxide is usuaUy measured by infrared absorption spectrometry. BeryUium carbide can be determined without interference from graphitic carbon by dissolution of the sample in a strong base. BeryUium carbide is converted to methane, which can be determined directly by gas chromatography. Alternatively, the evolved methane can be oxidized to carbon dioxide, which is determined gravimetricaUy (16). 

For the deterrnination of trace amounts of bismuth, atomic absorption spectrometry is probably the most sensitive method. A procedure involving the generation of bismuthine by the use of sodium borohydride followed by flameless atomic absorption spectrometry has been described (6). The sensitivity of this method is given as 10 pg/0.0044M, where M is an absorbance unit the precision is 6.7% for 25 pg of bismuth. The low neutron cross section of bismuth virtually rules out any deterrnination of bismuth based on neutron absorption or neutron activation. 

I have carried out widespread studies on the application of a sensitive and selective preconcentration method for the determination of trace a mounts of nickel by atomic absorption spectrometry. The method is based on soi ption of Cu(II) ions on natural Analcime Zeolit column modified with a new Schiff base 5-((4-hexaoxyphenylazo)-N-(n-hexyl-aminophenyl)) Salicylaldimine and then eluted with O.IM EDTA and determination by EAAS. Various parameters such as the effect of pH, flow rate, type and minimum amount of stripping and the effects of various cationic interferences on the recovery of ions were studied in the present work. 

The organic reagents are used extensively for determinations series of elements by different methods of analysis. We carry out the systematical investigation of organic derivatives of hydrazine as a reagent for determinations ion of metals by photometric and extractive-photometric methods or analysis, as well as methods of atomic absorption spectrometry. Series procedure determinations ion of metals in technical and environmental objects have been developed. 

MODERN ATOMIC ABSORPTION SPECTROMETRY ACHIEVEMENTS AND FUTURE PROSPECTS... 

Atomic absorption spectrometry (AAS) stalled its cai eer 50 years ago. During this time fundamentals of the method have been mostly discovered thus transforming AAS to very powerful but relatively simple method of analytical chemistry. Nowadays it is one of the most widespread methods in analytical labs. 

A NEW WAY TO CORRECT A NON-SELECTIVE LIGHT ABSORBANCE IN ATOMIC ABSORPTION SPECTROMETRY, BASING ON PRELIMINARY REGISTRATION OF MOLECULAR... 

FLOW INJECTION ELECTROCHEMICAL HYDRIDE GENERATION ATOMIC ABSORPTION SPECTROMETRY EOR THE DETERMINATION OE ARSENIC... 

INDIRECT DETERMINATION OF ASCORBIC ACID BY ELECTROTHERMAL ATOMIC ABSORPTION SPECTROMETRY... 

In this work, a method based on the reduction potential of ascorbic acid was developed for the sensitive detennination of trace of this compound. In this method ascorbic acid was added on the Cr(VI) solution to reduced that to Cr(III). Cr(III) produced in solution was quantitatively separated from the remainder of Cr(VI). The conditions were optimized for efficient extraction of Cr(III). The extracted Cr(III) was finally mineralized with nitric acid and sensitively analyzed by electro-thermal atomic absorption spectrometry. The determinations were carried out on a Varian AA-220 atomic absolution equipped with a GTA-110 graphite atomizer. The results obtained by this method were compared with those obtained by the other reported methods and it was cleared that the proposed method is more precise and able to determine the trace of ascorbic acid. Table shows the results obtained from the determination of ascorbic acid in two real samples by the proposed method and the spectrometric method based on reduction of Fe(III). 

The complex of the following destmctive and nondestmctive analytical methods was used for studying the composition of sponges inductively coupled plasma mass-spectrometry (ICP-MS), X-ray fluorescence (XRF), electron probe microanalysis (EPMA), and atomic absorption spectrometry (AAS). Techniques of sample preparation were developed for each method and their metrological characteristics were defined. Relative standard deviations for all the elements did not exceed 0.25 within detection limit. The accuracy of techniques elaborated was checked with the method of additions and control methods of analysis. 

COMPARISON OF MICROWAVE ASSISTED EXTRACTION METHODS FOR THE DETERMINATION OF PLATINUM GROUP ELEMENTS IN SOIL SAMPLES BY ELECTROTHERMAL ATOMIC ABSORPTION SPECTROMETRY AFTER PHASE SEPARATION-EXTRACTION... 

Direct atomic absorption spectrometry (AAS) analysis of increasing (e 0,10 g) mass of solid samples is the great practical interest since in a number of cases it allows to eliminate a long-time and labor consuming pretreatment dissolution procedure of materials and preconcentration of elements to be determined. Nevertheless at prevalent analytical practice iS iO based materials direct AAS are not practically used. 

B. Welz (translated by C. Skegg), Atomic Absorption Spectrometry, VCH, Weinheim, 1985. ISBN 0895734184. 

Electrothermal vaporization can be used for 5-100 )iL sample solution volumes or for small amounts of some solids. A graphite furnace similar to those used for graphite-furnace atomic absorption spectrometry can be used to vaporize the sample. Other devices including boats, ribbons, rods, and filaments, also can be used. The chosen device is heated in a series of steps to temperatures as high as 3000 K to produce a dry vapor and an aerosol, which are transported into the center of the plasma. A transient signal is produced due to matrix and element-dependent volatilization, so the detection system must be capable of time resolution better than 0.25 s. Concentration detection limits are typically 1-2 orders of magnitude better than those obtained via nebulization. Mass detection limits are typically in the range of tens of pg to ng, with a precision of 10% to 15%. 

---