Tables show

As an example, the following tables show the main specifications and characteristics that are in effect in France as of December 1993. 

According to the simple formula, the maximum bubble pressure is given by f max = 27/r where r is the radius of the circular cross-section tube, and P has been corrected for the hydrostatic head due to the depth of immersion of the tube. Using the appropriate table, show what maximum radius tube may be used if 7 computed by the simple formula is not to be more than 5% in error. Assume a liquid of 7 = 25 dyn/cm and density 0.98 g/cm. ... 

The figures in the table show clearly how rapidly / increases with x, and it is generally sufficient to define the critical supersaturation pressure such that In / is some arbitrary value such as unity. 

As the table shows, a host of other teclmiques have contributed a dozen or fewer results each. It is seen that diffraction teclmiques have been very prominent in the field the major diffraction methods have been LEED, PD, SEXAFS, XSW, XRD, while others have contributed less, such as NEXAFS, RHEED, low-energy position diffraction (LEPD), high-resolution electron energy loss spectroscopy (HREELS), medium-energy electron diffraction (MEED), Auger electron diffraction (AED), SEELFS, TED and atom diffraction (AD). 

Comparison between the first and last lines of the table shows that the sign of the ground-state wave function has been reversed, which implies the existence of a conical intersection somewhere inside the loop described by the table. 

In a similar way Table II summarizes how the phase changes upon interconversion among the isomers. Inspection of the two tables shows that for any loop containing three of the possible isomers (open chain and cyclobutene ones), the phase either does not change, or changes twice. Thus, there cannot be a conical intersection inside any of these loops in other words, photochemical transformations between these species only cannot occur via a conical intersection, regardless of the nature of the excited state. 

The following table shows the atomic numbers of the elements in Group VII of the Period Table and the melting points of their hydrides. 

Table 6. Table showing the assignment of rows of the force matrix for 4 processors. 

The n ==> n transition thus involves ground Ai) and exeited Ai) states whose direet produet (Ai x Ai) is of Ai symmetry. This transition thus requires that the eleetrie dipole operator possess a eomponent of Ai symmetry. A glanee at the C2v point group s eharaeter table shows that the moleeular z-axis is of A symmetry. Thus, if the light s eleetrie field has a non-zero eomponent along the C2 symmetry axis (the moleeule s z-axis), the n ==> 71 transition is predieted to be allowed. Light polarized along either of the moleeule s other two axes eannot induee this transition. 

Kinetic data are available for the nitration of a series of p-alkylphenyl trimethylammonium ions over a range of acidities in sulphuric acid. - The following table shows how p-methyl and p-tert-h xty augment the reactivity of the position ortho to them. Comparison with table 9.1 shows how very much more powerfully both the methyl and the tert-butyl group assist substitution into these strongly deactivated cations than they do at the o-positions in toluene and ferf-butylbenzene. Analysis of these results, and comparison with those for chlorination and bromination, shows that even in these highly deactivated cations, as in the nitration of alkylbenzenes ( 9.1.1), the alkyl groups still release electrons in the inductive order. In view of the comparisons just... 

Table 2 1 presents the number of possible alkane isomers as a function of the num ber of carbon atoms they contain As the table shows the number of isomers increases enormously with the number of carbon atoms and raises two important questions... 

The following table shows the accuracy of computed fundamental frequencies for CO2 (cm" ) ... 

EDTA is one member of a class of aminocarboxylate ligands that form very stable 1 1 complexes with metal ions. The following table shows log Kf values for several ligands with Ca + and Mg +. Which ligand is the best choice for the direct titration of Ca + in the presence of Mg + ... 

The Chauvenet tables relate the number of measurements to p values and assess the probability that the unusual value may be real or may be ignored. In the present example, the tables show that p = 1.73 for 6 measurements. Since the calculated value (1.80) is greater than 1.73, the result may be rejected. 

Fig. 4. Futuristic periodic table showing predicted locations of a large number of transuranium elements (atomic numbers in parentheses).

This table shows the relationship between hardness testing scales, but should not be used for hardness converson. See ASTM E140 (2) for specific materials conversions. 

Fig. 1. Periodic Table showing elements of importance in biological systems principal element of bioorganic compounds essential mineral nutrients for humans and other animals 1 essential mineral nutrient for animals, probably for humans M present in body, not known to be a nutrient or toxic element M element used in medicine element generally poisonous and present in body, possibly toxic.

ICUMSA (1) has adopted tables showing the relationship between the concentration of aqueous solutions of pure sucrose, glucose, fmctose, and invert sugar and refractive index at 20.0°C and 589 nm. 

Tills table shows tlie amoiuit of aiiliydroiis substance tliat is soluble in 100 g of water at tlie temperature in degrees Celsius as indicated when tlie name is followed by t, tlie value is expressed in grams of substance in 100 cm of saturated solution. Solid phase gives tlie hydrated form in equilibrium witli tlie saturated solution. 

In this work, a method based on the reduction potential of ascorbic acid was developed for the sensitive detennination of trace of this compound. In this method ascorbic acid was added on the Cr(VI) solution to reduced that to Cr(III). Cr(III) produced in solution was quantitatively separated from the remainder of Cr(VI). The conditions were optimized for efficient extraction of Cr(III). The extracted Cr(III) was finally mineralized with nitric acid and sensitively analyzed by electro-thermal atomic absorption spectrometry. The determinations were carried out on a Varian AA-220 atomic absolution equipped with a GTA-110 graphite atomizer. The results obtained by this method were compared with those obtained by the other reported methods and it was cleared that the proposed method is more precise and able to determine the trace of ascorbic acid. Table shows the results obtained from the determination of ascorbic acid in two real samples by the proposed method and the spectrometric method based on reduction of Fe(III). 

Because of this, the data listed in Table 15.7 for ceramic materials differ in emphasis from those listed for metals. In particular, the Table shows the modulus of rupture (the maximum surface stress when a beam breaks in bending) and the thermal shoek resist-anee (the ability of the solid to withstand sudden changes in temperature). These, rather than the yield strength, tend to be the critical properties in any design exercise. 

Figure 6.3.1 Table showing computer on-line calculation.

Prepare a table showing the weight in grams and the surface area in m of a 0.1-, 1.0-, 10.0-, and 100.0-ptm-diameter spherical particle of unit density. 

Tables 27-1 to 27-3 have concentrated on the personnel makeup of control agencies. For a broader look at places of employment. Table 27-4 shows where 8037 members of the Air Pollution Control Association (APCA) of the United States and Canada worked in 1982. (This list includes foreign as well as domestic members of APCA but does not include the membership of the air pollution control associations of other countries.) This table shows that only 10.7% of the members work in control agencies. This table gives a somewhat distorted picture because in many air pollution organizations only the senior executive, professional, and scientific personnel belong to APCA, whereas the total North American workforce in air pollution includes several times the 8037 membership total who are in junior, technical, service, or manual sectors and are not association members. These numbers could be still greater if those engaged in this work outside North America were included. The Air Pollution Control Association changed its name to the Air and Waste Management Association in 1988. The Air and Waste Management Association had a membership of over 14,000 in 1993, but only a portion of the members were active in the air pollution profession.

GPSA" also provides a table showing 1982 Perfonnance Specifications for a worldwide list of gas turbines, in their Section 15. 

Here is a table showing major water impurities, the difficulties they cause, and their treatment. 

The following table shows the three most used refrigeration systems and approximate temperature ranges. 

Table A-4-1.3a, based on data in [62], shows how the MIE (mJ) of 28 vol% hydrogen and 8.5 vol% methane in air vary with circuit capacitance (pF) and electrode diameter (mm). Points refers to the use of steel gramophone needles. The table shows that MIE is decreased with decreased capacitance and electrode diameter however, as reflected in Figure 3-5.4.1 corona...

As is to be expected, the table shows that as the humidity is increased, causing swelling and an increase in the interchain separation, so the oxygen permeability increases. Also, as expected, the percentage increase is greater the higher the vinyl alcohol content. 

Footnote This table shows only the major code sections. For more detail and to determine when a section was added, the reader should consult the official primed version of the U.S. Code. 

Dimensionless groups for a proeess model ean be easily obtained by inspeetion from Table 13-2. Eaeh of the three transport balanees is shown (in veetor/tensor notation) term-by-term under the deseription of the physieal meanings of the respeetive terms. The table shows how various well-known dimensionless groups are derived and gives the physieal interpretation of the various groups. Table 13-3 gives the symbols of the dimensions of the terms in Table 13-2. 

The main reason for producing multi-layer co-extruded films is to get materials with better barrier properties - particularly in regard to gas permeation. The following Table shows the effects which can be achieved. Data on permeability of plastics are also given in Figs 1.13 and 1.14. 

---