LEAD-ACID

In some instances the use of sulphuric acid leads to unsatisfactory results. Thus with formic acid carbon monoxide would be evolved. Esters of formic acid are most simply prepared from the alcohol and excess of formic acid, for example ... 

An interesting coupling reaction with the diazonium salt derived from anthranilic acid leads to an excellent method for the preparation of dlphenic acid. The reaction occurs with cuprous salts in ammoniacal solution ... 

A simple application of the reaction may bo mentioned. Refluxing of (I) with 48 per cent, hydrobromic aeid and glacial acetic acid leads to hydrolysis and decarboxylation and the production of a mixture of the yl tctone yr-di-phonylbutyrolaotone (II) and the isomeric unsaturated acid yY-dlphenyl-vinylacotic acid (III) reduction by the Clemmonsen method or catalytically... 

Separations based upon differences in the chemical properties of the components. Thus a mixture of toluene and anihne may be separated by extraction with dilute hydrochloric acid the aniline passes into the aqueous layer in the form of the salt, anihne hydrochloride, and may be recovered by neutralisation. Similarly, a mixture of phenol and toluene may be separated by treatment with dilute sodium hydroxide. The above examples are, of comse, simple apphcations of the fact that the various components fah into different solubihty groups (compare Section XI,5). Another example is the separation of a mixture of di-n-butyl ether and chlorobenzene concentrated sulphuric acid dissolves only the w-butyl other and it may be recovered from solution by dilution with water. With some classes of compounds, e.g., unsaturated compounds, concentrated sulphuric acid leads to polymerisation, sulphona-tion, etc., so that the original component cannot be recovered unchanged this solvent, therefore, possesses hmited apphcation. Phenols may be separated from acids (for example, o-cresol from benzoic acid) by a dilute solution of sodium bicarbonate the weakly acidic phenols (and also enols) are not converted into salts by this reagent and may be removed by ether extraction or by other means the acids pass into solution as the sodium salts and may be recovered after acidification. Aldehydes, e.g., benzaldehyde, may be separated from liquid hydrocarbons and other neutral, water-insoluble hquid compounds by shaking with a solution of sodium bisulphite the aldehyde forms a sohd bisulphite compound, which may be filtered off and decomposed with dilute acid or with sodium bicarbonate solution in order to recover the aldehyde. 

In contrast to its effect upon the general mechanism of nitration by the nitronium ion, nitrous acid catalyses the nitration of phenol, aniline, and related compounds. Some of these compounds are oxidised under the conditions of reaction and the consequent formation of more nitrous acids leads to autocatalysis. 

The cyclization of -halocarbonyl compounds is carried out with a great variety of reactants including thioamides, thioureas, their mono- or disubstituted derivatives, and salts and esters of monothiocar-bamic acid, leading to variously substituted thiazoles. 

These intermediates upon treatment by acid lead to thiazole by loss of H3O from 95a or 95b. 

The compounds most frequently encountered m this reaction are (3 keto acids that is carboxylic acids m which the (3 carbon is a carbonyl function Decarboxylation of (3 keto acids leads to ketones... 

The reaction of aldoses with nitric acid leads to the formation of aldaric acids by oxidation of both the aldehyde and the terminal primary alcohol function to carboxylic acid groups Aldaric acids are also known as saccharic acids and are named by substi tutmg aric acid for the ose ending of the corresponding carbohydrate... 

Although lead chloride is moderately soluble in the acid, lead is also used occasionaUy in hydrochloric acid service. Addition of 6—25% Sb increases the corrosion resistance. AH and ferric chloride accelerate the corrosion. Durichlor (14.5% Si, 3% Mo, 82% Fe), a sUica-based aUoy, shows exceUent resistance to hot hydrochloric acid in the absence of ferric chloride. 

Nitrates. Iron(II) nitrate hexahydrate [14013-86-6], Fe(N03)2 6H20, is a green crystalline material prepared by dissolving iron in cold nitric acid that has a specific gravity of less than 1.034 g/cm. Use of denser, more concentrated acid leads to oxidation to iron(III). An alternative method of preparation is the reaction of iron(II) sulfate and barium or lead nitrate. The compound is very soluble in water. Crystallisation at temperatures below — 12°C affords an nonahydrate. Iron(II) nitrate is a useful reagent for the synthesis of other iron-containing compounds and is used as a catalyst for reduction reactions. 

Lead antimonate [13510-89-9] (Naples yellow), Pb2(Sb0 2> mol wt 993.07, d = 6.58g/cm, is an orange-yeUow powder that is insoluble in water and dilute acids, but very slightly soluble in hydrochloric acid. Lead antimonates are modifiers for ferroelectric lead titanates, pigments in oil-base paints, and colorants for glasses and glazes (see Colorants for ceramics). They are made by the reaction of lead nitrate and potassium antimonate solutions, followed by concentration and crystallization. 

Lead borate moaohydrate [14720-53-7] (lead metaborate), Pb(B02)2 H20, mol wt 310.82, d = 5.6g/cm (anhydrous) is a white crystalline powder. The metaborate loses water of crystallization at 160°C and melts at 500°C. It is iasoluble ia water and alkaHes, but readily soluble ia nitric and hot acetic acid. Lead metaborate may be produced by a fusion of boric acid with lead carbonate or litharge. It also may be formed as a precipitate when a concentrated solution of lead nitrate is mixed with an excess of borax. The oxides of lead and boron are miscible and form clear lead-borate glasses in the range of 21 to 73 mol % PbO. 

Lead zirconate [12060-01 -4] PbZrO, mol wt 346.41, has two colorless crystal stmctures a cubic perovskite form above 230°C (Curie point) and a pseudotetragonal or orthorhombic form below 230°C. It is insoluble in water and aqueous alkaUes, but soluble in strong mineral acids. Lead zirconate is usually prepared by heating together the oxides of lead and zirconium in the proper proportion. It readily forms soHd solutions with other compounds with the ABO stmcture, such as barium zirconate or lead titanate. Mixed lead titanate-zirconates have particularly high piezoelectric properties. They are used in high power acoustic-radiating transducers, hydrophones, and specialty instmments (146). 

Health and Safety Factors. Terephthahc acid has a low order of toxicity. Inhalation by rats for 6 h/d, 5 d/wk for 4 wk produced no fatahties at a dust exposure level of 25 mg/m. The mean acute oral toxicity for rats is over 18 g/kg (86), and for mice over 6 g/kg (87). When terephthahc acid was fed as 3% of the diet to rats, urinary calcuh formed in 90 d, some of which led to cancer. High doses of terephthahc acid lead to formation of calcium terephthalate at levels exceeding its solubihty in urine. This insoluble material leads to the calcuh and provides a threshold below which cancer is not observed (88). Normal precautions used in handling industrial chemicals should be observed with terephthahc acid. If ventilation is inadequate, a toxic-dust respirator should be used to avoid prolonged exposure. 

Some related antibacteiials are also included with the sulfonamides. The azo dye, Piontosil (3) is metabolized to sulfanilamide in and was the piogenitoi of the sulfa dmgs. Also, the antibacteiial sulfones, eg, dapsone (4), are believed to act in a similai fashion on enzymes involved with synthesis of fohc acid, leading to bacterial growth inhibition. 

Fig. 2. Synthesis of uma2enil (18). The isonitrosoacetanihde is synthesized from 4-f1iioroani1ine. Cyclization using sulfuric acid is followed by oxidization using peracetic acid to the isatoic anhydride. Reaction of sarcosine in DMF and acetic acid leads to the benzodiazepine-2,5-dione. Deprotonation, phosphorylation, and subsequent reaction with diethyl malonate leads to the diester. After selective hydrolysis and decarboxylation the resulting monoester is nitrosated and catalyticaHy hydrogenated to the aminoester. Introduction of the final carbon atom is accompHshed by reaction of triethyl orthoformate to...

En2ymatic reduction of folic acid leads to the 7,8-dihydrofolic acid (H2 folate) (2), a key substance in biosynthesis. Further reduction, cataly2ed by the en2yme dihydrofohc acid reductase, provides (65)-5,6,7,8-tetrahydrofohc acid (H folate) (3). The folate (3) is the key biological intermediate for the formation of other folates (4—8) (Table 2). 

Antimony pentafluoride is a strong Lewis acid and a good oxidizing and fluorinating agent. Its behavior as a Lewis acid leads to the formation of numerous simple and complex adducts. It reacts vigorously with water to form a clear solution from which antimony pentafluoride dihydrate [65277-49-8], SbF 2H2O, may be isolated. This is probably not a tme hydrate, but may well be better formulated as [H O] [SbF OH]. 

Protonation of the nido-lanion with strong acids leads to the neutral highly acidic C2B2H23 molecule. 

In cases where a large excess of acid is undesirable, chlorosulfonic acid is employed. An excess of chlorosulfonic acid leads to the introduction of a chlorosulfonyl group which is a useful synthon for the preparation of sulfonamides and sulfonate esters. 

Acidic Hydrolysis. Hydrolysis of esters by use of water and a mineral acid leads to an equiUbrium mixture of ester, alcohol, and free carboxyHc acid. Complete reaction can only be achieved by removal of alcohol or acid from the equiUbrium. Because esters have poor solubiUty in water, the reaction rate in dilute acids is fairly low. Therefore, emulsifiers such as sulfonated oleic acid or sulfonated aromatic compounds (TwitcheU reagent) are added to facihtate the reaction. 

The cyclization of 5-(2-carboxyanilino)pyrimidine (170) with sulfuric acid/phosphoric acid leads to the 7-chloropyrimido[5,4-A]quinolinetriones (171) (57JCS4997, 74KGS131), the 2,4,10-trichloro compounds being obtained with phosphoryl chloride (72JHC91), whilst a formally similar cyclization of 4(6)-arylamino-5-ethoxycarbonylpyrimidines gives... 

In the preceding parts of Section 4.04.2.1.3 the electrophilic attack on pyrazolic nitrogen with the concomitant formation of different classes of N—R bond has been examined N—H (iv, v), N—metal (vi), N—C(sp ) (vii, viii, xi), N—C(sp ) (be, x, xi), N—SO2R (x), N—halogen (xii), N—O (xiii) and N—-N (xiv). In this last part the reaction with other Lewis acids leading to the formation of pyrazole N—metalloid bonds will be discussed, and the study of their reactivity will be dealt with in Section 4.04.2.3.lO(viii). 

Aziridinones undergo two types of selective ring opening by nucleophiles <68AG(E)25). Reaction with proton-containing nucleophiles, e.g. water, alcohols, thiols, amines and mineral acids, leads exclusively to amides (339), corresponding to an C —N bond rupture. 

Lead tetracetate Acetic acid, lead (4+) salt (8,9) (546-67-8)... 

Aqueous hydrofluoric acid can be freed from lead by adding ImL of 10% strontium chloride per KXhnL of acid, lead being co-precipitated as lead fluoride with the strontium fluoride. If the hydrofluoric acid is decanted from the precipitate and the process repeated, the final lead content in the acid is less than 0.003 ppm. Similarly, lead can be precipitated from a nearly saturated sodium carbonate solution by adding 10% strontium chloride dropwise (l-2mL per lOOmL) followed by filtration. (If the sodium carbonate is required as a solid, the solution can be evaporated to dryness in a platinum dish.) Removal of lead from potassium chloride uses precipitation as lead sulfide by bubbling H2S, followed, after filtration, by evaporation and recrystallisation of the potassium chloride. 

Chlorination of 1-hexyne in acetic acid leads mainly to l,l-dichlorohexan-2-one via chlorination and deacetylation of the initial product, 2-acetoxy-l-chlorohexene. 

---