Carboxyhc acid

Diphenic acid. Phenanthrene upon oxidation in acetic acid solution at 85° with 30 per cent, hydrogen peroxide gives diphenic acid (diphenyl-2 2 -di-carboxyHc acid) no phenanthraquinone is formed under these experimental conditions. The reaction is essentially an oxidation of phenanthrene with peracetic acid. (For another method of preparation, see Section I V,74.)... 

Benzanilide and similar compounds are very slowly hydrolysed by concentrated hydrochloric acid hydrolysis is quite rapid with 60-70 per cent, sulphuric acid (for experimental details, see Section IV,52). In the preliminary experiment boil 0 5-1 Og. of the compound with 10-20 ml. of dilute sulphuric acid (1 1 by volume) imder reflux for 20-30 minutes. Dilute with 10ml.of water and filteroflfanyacid which may be precipitated if the carboxyhc acid is hquid and volatile, distil it directly from the reaction mixture. Render the residue alkaline and isolate the base as above. 

Phenylglycine-o-carboxylic acid. In a 750 ml. round-bottomed flask, fitted with a reflux condenser, place 14 g. of anthranilic acid (Section IV,170), 10 g. of chloroacetic acid, 20 g. of anhydrous sodium carbonate and 200 ml. of water. Reflux the mixture for. 3 hours, then pour into a beaker, cool, render shghtly acid with concentrated hy dro-chloric acid, and allow to stand overnight. Filter off the crude acid and wash it with water. Recrystalhse from hot water with the aid of a little decolourising carbon, and dry the acid at 100°. The yield of phenyl-glycine-o-carboxyhc acid, m.p. 208°, is 12 g. 

RCH(OH)=CHCOR or -keto esters RCH(OH)=CHCOOR ) dissolve in dilute sodium hydroxide solution, i.e., contain an acidic group of sufficient strength to react with the alkah. Carboxyhc acids and sulphonic acids are soluble in dilute solutions of sodium bicarbonate some negatively-substituted phenols, for example, picric acid, 2 4 6-tribromo-phenol and 2 4-dinitrophenol, are strongly acidic and also dissolve in dilute sodium bicarbonate solution. 

Analysis The carboxyhc acid is the only FG so we can start there ... 

Uronic acids occupy an oxidation state between aldonic and aldanc acids They have an aldehyde function at one end of their carbon chain and a carboxyhc acid group at the other... 

Acetyloxy)methyl]-7-[(5-amino-5-carboxy-l-oxopentyl)amino]-8-oxo-5-thia-l-a2abicyclo[4.2.0]oct-2-ene-2-carboxyhc acid... 

ANTIBIOTICS - BETA-LACTAMS - BETA-LACTAMASE INHIBITORS] (Vol 3) [2(S)-(2a,5a,6(Z))]-3,3-Dimethyl-7-o2o-6(2-oxo-propylidene)-4-thia-l-azabicydo [3.2.0]-heptane-2-carboxyhc acid... 

Phenyl-acetamido)-3,3-dimethyl-7-oxo-4-thia-l-azabicyclo [3.2.0]heptane-2-carboxyhc acid... 

The dependence of chiral recognition on the formation of the diastereomeric complex imposes constraints on the proximity of the metal binding sites, usually either an hydroxy or an amine a to a carboxyHc acid, in the analyte. Principal advantages of this technique include the abiHty to assign configuration in the absence of standards, enantioresolve non aromatic analytes, use aqueous mobile phases, acquire a stationary phase with the opposite enantioselectivity, and predict the likelihood of successful chiral resolution for a given analyte based on a weU-understood chiral recognition mechanism. 

Other eactions. Most of the metabohtes of cortisol are neutral (alcohol or glucuronide complex) compounds. However, oxidation at C-21 to C-21 carboxyhc acids (17) accounts for some of the identifiable metabohtes of glucocorticoids (18). 

Ketopregnan-21-oic Acids, the 17(3-Carboxy Androstanes, and the D-Homocorticoids. In the course of studies on the metabohsm of fluocoitolone (103) the formation of the water-soluble carboxyhc acid (105, R = H) was reported. As a free 21-hydroxyl is not necessary for antiinflammatory activity, it was concluded that the esters (105, R = alkyl) of the preceding metabohte would possess antiinflammatory activity on topical administration but would be devoid of systemic activity when hydrolysis to the free acid occurs followed by... 

Another series of antiinflammatory carboxyhc acids that ate derived from cortienic acid (107), a minor adrenal metabohte, has been described (104,105). Esterification of both the 17a-hydroxyl group and the carboxyhc acid of (107) were requited to develop a compound of high topical potency with low systemic activity. Peak activity was generally associated with a 17a-propionoxy group and a 17P- uoromethoxy carbonyl (eg, (108)), or 17P-methoxycarbonyl residue. 

Positive-Tone Photoresists based on Dissolution Inhibition by Diazonaphthoquinones. The intrinsic limitations of bis-azide—cycHzed mbber resist systems led the semiconductor industry to shift to a class of imaging materials based on diazonaphthoquinone (DNQ) photosensitizers. Both the chemistry and the imaging mechanism of these resists (Fig. 10) differ in fundamental ways from those described thus far (23). The DNQ acts as a dissolution inhibitor for the matrix resin, a low molecular weight condensation product of formaldehyde and cresol isomers known as novolac (24). The phenoHc stmcture renders the novolac polymer weakly acidic, and readily soluble in aqueous alkaline solutions. In admixture with an appropriate DNQ the polymer s dissolution rate is sharply decreased. Photolysis causes the DNQ to undergo a multistep reaction sequence, ultimately forming a base-soluble carboxyHc acid which does not inhibit film dissolution. Immersion of a pattemwise-exposed film of the resist in an aqueous solution of hydroxide ion leads to rapid dissolution of the exposed areas and only very slow dissolution of unexposed regions. In contrast with crosslinking resists, the film solubiHty is controUed by chemical and polarity differences rather than molecular size. 

Acid-C t lyzed Chemistry. Acid-catalyzed reactions form the basis for essentially all chemically amplified resist systems for microlithography appHcations (61). These reactions can be generally classified as either cross-linking (photopolymerization) or deprotection reactions. The latter are used to unmask acidic functionality such as phenohc or pendent carboxyhc acid groups, and thus lend themselves to positive tone resist apphcations. Acid-catalyzed polymer cross-linking and photopolymerization reactions, on the other hand, find appHcation in negative tone resist systems. Representative examples of each type of chemistry are Hsted below. 

By analogy, a great many of other functionalized styrenes, including carboxyHc acids, amino acids, Schiff bases, or specific compounds, eg, l-DOPA, have successfully been appHed as print templates. Moreover, it has also been shown that siUca gel can be imprinted with similar templates, and that the resulting gel has specific recognition sites determined by the print molecule (162—164). 

As a class of compounds, nitriles have broad commercial utility that includes their use as solvents, feedstocks, pharmaceuticals, catalysts, and pesticides. The versatile reactivity of organonitnles arises both from the reactivity of the C=N bond, and from the abiHty of the cyano substituent to activate adjacent bonds, especially C—H bonds. Nitriles can be used to prepare amines, amides, amidines, carboxyHc acids and esters, aldehydes, ketones, large-ring cycHc ketones, imines, heterocycles, orthoesters, and other compounds. Some of the more common transformations involve hydrolysis or alcoholysis to produce amides, acids and esters, and hydrogenation to produce amines, which are intermediates for the production of polyurethanes and polyamides. An extensive review on hydrogenation of nitriles has been recendy pubHshed (10). 

Chemical Properties and Industrial Uses. Chloroacetic acid has wide appHcations as an industrial chemical intermediate. Both the carboxyhc acid group and the cx-chlorine are very reactive. It readily forms esters and amides, and can undergo a variety of cx-chlorine substitutions. 

Fluotinated higher carboxyHc acids, Perfluoroalkanesulfonic acids,... 

Difluoroethanol is prepared by the mercuric oxide cataly2ed hydrolysis of 2-bromo-l,l-difluoroethane with carboxyHc acid esters and alkaH metal hydroxides ia water (27). Its chemical reactions are similar to those of most alcohols. It can be oxidi2ed to difluoroacetic acid [381-73-7] (28) it forms alkoxides with alkaH and alkaline-earth metals (29) with alkoxides of other alcohols it forms mixed ethers such as 2,2-difluoroethyl methyl ether [461-57-4], bp 47°C, or 2,2-difluoroethyl ethyl ether [82907-09-3], bp 66°C (29). 2,2-Difluoroethyl difluoromethyl ether [32778-16-8], made from the alcohol and chlorodifluoromethane ia aqueous base, has been iavestigated as an inhalation anesthetic (30,31) as have several ethers made by addition of the alcohol to various fluoroalkenes (32,33). Methacrylate esters of the alcohol are useful as a sheathing material for polymers ia optical appHcations (34). The alcohol has also been reported to be useful as a working fluid ia heat pumps (35). The alcohol is available ia research quantities for ca 6/g (1992). 

Sulfur Tetrafluoride and Aromatic Carboxylic Acids. Ben2otrifluorides also are prepared from aromatic carboxyhc acids and their derivatives with sulfur tetrafluoride (SF (106,107). Hydrogen fluoride is frequently used as a catalyst. Two equivalents of sulfur tetrafluoride are required ... 

---