Thickened

Heavy metals often can be removed effectively by chemical precipitation in the form of carbonates, hydroxides, or sulfides. Sodium carbonate, sodium bisulfite, sodium hydroxide, and calcium oxide are all used as precipitation agents. The solids precipitate as a floe containing a large amount of water in the structure. The precipitated solids need to be separated by thickening or filtration and recycled if possible. If recycling is not possible, then the solids are usually disposed of to a landfill. 

Agar occurs as a cell-wall constituent of the red marine algae Rho ophyceae, from which it is extracted by hot water, and marketed as a dry powder, flakes, or strips. It dissolves in hot water and sets on cooling to a jelly at a concentration as low as 0-5%. Its chief uses are as a solid medium for cultivating micro-organisms, as a thickener, emulsion stabilizer in the food industry and as a laxative. 

The base lubricant is usually a petroleum oil while the thickener usually consists of a soap or soap mixture. In addition they may contain small amounts of free alkali, free fatty acid, glycerine, anti-oxidant, extreme-pressure agent, graphite or molybdenum disulphide. 

Non-soap greases using finely divided solids as thickeners are useful as lubricants at elevated temperatures. Materials used include organO Clays such as dimethyldioctyl-decyl-ammonium bentonite (Bentone greases) or selected dyestuffs which produce brightly coloured greases. 

Dapalm The aluminium soap of naphthenic and palmitic acids used to gel gasoline. The thickened gasoline has been used for military flame throwers and incendiary bombs. See metallic soaps. 

Starch can be split into amylose and amylopectin by a commercial process based on selective solubilities. Amylose is used for making edible films, and amylopectin for textile sizing and finishing, and as a thickener in foods. 

In the manufacture of base oils, one of the refining operations is to extract with the aid of an appropriate solvent (furfural most often) the most aromatic fractions and the polar components. When free of solvent, the extracted aromatic fraction can eventually be refined, particularly to remove color or to thicken it, or still further, to fractionate it. The term, aromatic extract is used in every case. 

Shearing causes polymer chains to break, therefore a decrease in molecular weight and, consequently, in thickening power. It has been shown that the higher its molecular weight, the more the polymer is sensitive to mechanical shearing (Brlant et al., 1985). 

Polymethacrylates are less soluble than hydrocarbon polymers in mineral oils, they thicken less at low temperatures and are more effective at high temperatures. In this respect, it is important to note that the modification of rheoiogical properties is based on interactions between polymer and oil it will therefore be always dependent of the nature of oil. 

One molecular solid to which a great deal of attention has been given is ice. A review by Fletcher [74] cites calculated surface tension values of 100-120 ergs/cm (see Ref. 75) as compared to an experimental measurement of 109 ergs/cm [76]. There is much evidence that a liquidlike layer develops at the ice-vapor interface, beginning around -35°C and thickening with increasing temperature [45, 74, 77, 78]. 

The first term on the right is the common inverse cube law, the second is taken to be the empirically more important form for moderate film thickness (and also conforms to the polarization model, Section XVII-7C), and the last term allows for structural perturbation in the adsorbed film relative to bulk liquid adsorbate. In effect, the vapor pressure of a thin multilayer film is taken to be P and to relax toward P as the film thickens. The equation has been useful in relating adsorption isotherms to contact angle behavior (see Section X-7). Roy and Halsey [73] have used a similar equation earlier, Halsey [74] allowed for surface heterogeneity by assuming a distribution of Uq values in Eq. XVII-79. Dubinin s equation (Eq. XVII-75) has been mentioned another variant has been used by Bonnetain and co-workers [7S]. 

Dilatant fluids (also known as shear thickening fluids) show an increase in viscosity with an increase in shear rate. Such an increase in viscosity may, or may not, be accompanied by a measurable change in the volume of the fluid (Metzener and Whitlock, 1958). Power law-type rheologicaJ equations with n > 1 are usually used to model this type of fluids. 

The controlled thermal decomposition of dry aromatic diazonium fluoborates to yield an aromatic fluoride, boron trifluoride and nitrogen is known as the Schiemann reaction. Most diazonium fluoborates have definite decomposition temperatures and the rates of decomposition, with few exceptions, are easily controlled. Another procedure for preparing the diazonium fluoborate is to diazotise in the presence of the fluoborate ion. Fluoboric acid may be the only acid present, thus acting as acid and source of fluoborate ion. The insoluble fluoborate separates as it is formed side reactions, such as phenol formation and coupling, are held at a minimum temperature control is not usually critical and the temperature may rise to about 20° without ill effect efficient stirring is, however, necessary since a continuously thickening precipitate is formed as the reaction proceeds. The modified procedure is illustrated by the preparation of -fluoroanisole ... 

When the film thickens beyond two or three molecular layers, the effect of surface structure is largely smoothed out. It should therefore be possible, as Hill and Halsey have argued, to analyse the isotherm in the multilayer region by reference to surface forces (Chapter 1), the partial molar entropy of the adsorbed film being taken as equal to that of the liquid adsorptive. By application of the 6-12 relation of Chapter 1 (with omission of the r" term as being negligible except at short distances) Hill was able to arrive at the isotherm equation... 

Dormicum Dormodor Dormonoct Dorr thickeners Dortmund... 

---