Standards requirements

The Scania plant at Falun in Sweden manufaetures bus and truck steering knuckles. These are safety-critical components that are specified as having to be crack-free. For this reason, every component is now inspected using an automatic process that ensures the appropiate inspection is consistently canied out to the required standards of quality. Photos of the system are shown in Fig 1. The principle of operation is as follows. 

For the customer to ascertain the capability of a producer to deliver goods or services to the required standards it is essential for the producer to have all documents that establish his or her competence to deliver the goods or services, according to the prescribed Quality Standards. These documents may cover... 

As stated earlier, turboexpanders are normally used in cryogenic processes to produce isentropic expansion to cool down the process gas. Two common applications are natural gas processing plants and chemical plants. In natural gas processing plants, turboexpanders are installed to liquify heavier hydrocarbon components and produce lean natural gas with specified dew point limits to meet required standards. 

To gather information which will enable selection of appropriate control equipment. If a source test determines that the emission is 3000 mg of particulate per cubic meter and that it has a weight mean size of 5 p.m, a control device must be chosen which will collect enough particulate to meet some required standard, such as 200 mg per cubic meter. (4) To determine the efficiency of control equipment installed to reduce emissions. If a manufacturer supplies a device guaranteed to be 95% efficient for removal of particulate with a weight mean size of 5 /rm, the effluent stream must be sampled at the inlet and outlet of the device to determine if the guarantee has been met. 

There are advantages to direct solid sampling. Sample preparation is less time consuming and less prone to contamination, and the analysis of microsamples is more straightforward. However, calibration may be more difficult than with solution samples, requiring standards that are matched more closely to the sample. Precision is typically 5% to 10% because of sample inhomogeneity and variations in the sample vaporization step. 

Processes for SS separation may fill three distinct functions in wastewater treatment, namely, pretreatment to protect subsequent processes and reduce their loadings to required levels, treatment to reduce effluent concentrations to required standards, and separation of solids to produce concentrated recycle streams required to maintain other processes. In the first two functions effluent quality is the prime consideration, but where the third function must be fulfilled along with one of the others, design attention must be given to conditions for both the separated solids (sludge) and the process effluent. 

The pitch of the coils and the area covered can be selected to provide the heat transfer area required. Standard pipe sizes from 60 imn to 120 mm outside diameter area are often used. Half-pipe construction can produce a jacket capable of withstanding a higher pressure than conventional jacket design. 

Where 90° turns in piping are required, standard long radius ells (ell centerline radius equals 1.5 times pipe nominal diameter) are usually used. In sandy service, the sand has a tendency to erode the metal on the outside of the bend. Target tees, such as shown in Figure 15-25, are often specified for such service. The sand builds up against the bull plug and provides a cushion of sand that is constantly being eroded and subject to deposition by the sand in the flow stream. 

States also began to look at new products. Massachusetts promulgated legislation requiring its state energy office to set standards for fluorescent and incandescent lamps, and introduced legislation requiring standards for electric motors. Transformers were later added to the Massachusetts list. 

Planned maintenance can reduce the demand for highly experienced craftsmen in that, if the instructions issued in work docket and advice/guidance notes are adequate, a less-skilled person should be able to perform the work task correctly. It follows that adequate training must be provided to ensure that, irrespective of the degree of the operative s skills and experience, the work task given will be carried out to the required standard. 

Galvanising should be post-fabrication, with steel sheet treated to BS2989 and other items to BS729 . Where appearance is important, designers could do worse than have galvanised samples coated before deciding whether powder coating will produce required standard. 

Reagents required. Standard EDTA solution, 0.05M. See Section 10.49. 

Campbell (6) was perhaps the first to investigate the relationship between tenderometer values for raw peas and the texture characteristics of collateral samples after freezing and cooking. A high degree of correlation was observed. The investigations of Nielsen and co-workers (31) indicate the usefulness of the instrument for estimation of maturity in peas intended for freezing preservation. In order to secure consistent and reproducible results, the instrument requires standardization and calibration, and the measurements must be made under standardized conditions of temperature and interval after harvest. 

Length, area, and volume measure the size of an object. Length refers to one dimension, area refers to two dimensions, and volume refers to three dimensions of space. Size measurements require standard measuring devices, such as rulers or measuring cups. Figure 1-14 shows some standard laboratory equipment for measuring volume. 

Other scientific disciplines required standards. WTien the American Type Culture Collection (ATCC) was founded in 1925, one of its chief roles was to be a source of standards for the rapidly developing public health laboratory activity in the USA. In this context we mean standard organisms, rather than standard materials or chemicals, but their use was analogous, they helped produce better analytical data. 

Exacting control of buffer preparation and the characteristics of capillaries and coatings is now recognized as key to successful electrophoretic separations.2 Repeatability of separations requires standardized surface preparation and rinse procedures. For example, capillaries can be coated with polyacrylamide using thionyl chloride surface activation. This approach was useful in DNA analysis.3 Non-aqueous buffers can be used to permit the use of thicker capillaries and higher voltages.4... 

OR Most patients require standard doses for maintenance... 

Choose an appropriate feeding formula based on patient-specific factors. This necessitates assessing the patient s nutritional requirements. Standard polymeric formulas are appropriate for the majority of patients. 

The establishment of performance criteria for a given tumor marker test is not a simple process because accuracy and precision are unique for each type of analyte and its application. Establishing methodological limits for accuracy, precision, sensitivity, and specificity often requires standard reference materials, quality control materials, comparative studies, and actual clinical specimens. Accuracy and precision must be measured over the analyte reportable range for which the device is intended to be used. Sensitivity and specificity must be considered with respect to the intended clinical use of the device. Also, the indications for use should be carefully considered in the design of the study protocol. The indications for class II should be to monitor residual tumor after surgery (or radiation), the recurrence of tumor, or response to therapy. A 510(k) must provide clear evidence that the device is accurate, safe, effective, and substantially equivalent to a device legally marketed in the United States. 

Hydrogenation processes usually require standards and materials that may not be warranted in other operations of the petroleum industry. At certain combinations of elevated temperature and hydrogen partial pressure, both chemical and metallurgical changes occur in carbon steel, which in advanced stages can render it unsuitable for safe operation. Alloy steels containing chromium and molybdenum can be used under such conditions. 

For a heterogeneous reaction, the state of all components is not uniform, for example, a reaction between a gas and a liquid. This requires standard states to be defined for each component. The activity of a solid in the equilibrium constant can be taken to be unity. 

Spencer and Brewer [144] have reviewed methods for the determination of nitrite in seawater. Workers at WRc, UK [ 145] have described an automated procedure for the determination of oxidised nitrogen and nitrite in estuarine waters. The procedure determines nitrite by reaction with N-1 naphthyl-ethylene diamine hydrochloride under acidic conditions to form an azo dye which is measured spectrophotometrically. The reliability and precision of the procedure were tested and found to be satisfactory for routine analyses, provided that standards are prepared using water of an appropriate salinity. Samples taken at the mouth of an estuary require standards prepared in synthetic seawater, while samples taken at the tidal limit of the estuary require standards prepared using deionised water. At sampling points between these two extremes there will be an error of up to 10% unless the salinity of the standards is adjusted accordingly. In a modification of the method, nitrate is reduced to nitrite in a micro cadmium/copper reduction column and total nitrite estimated. The nitrate content is then obtained by difference. 

For typical symptoms, treat empirically with prescription-strength acid-suppression therapy. If symptoms recur, consider maintenance therapy (Ml). Note Most patients will require standard doses for MT. 

Most patients require standard doses to prevent relapses. H2RAs may be an effective maintenance therapy in patients with mild disease. The PPIs are the drugs of choice for maintenance treatment of moderate to severe esophagitis. Usual once-daily doses are omeprazole 20 mg, lansoprazole 30 mg, rabeprazole 20 mg, or esomeprazole 20 mg. Lower doses of a PPI or alternate-day regimens may be effective in some patients with less severe disease. 

Standard CAA products contain a balanced profile of essential, semiessential, and nonessential L-amino acids and are designed for patients with normal organ function and nutritional requirements. Standard CAA... 

Medical Management No specific viral therapy exists so treatment is supportive only. Treat patients with uncomplicated VEE infection with analgesics to relieve headache and myalgia. Patients who develop encephalitis could require anticonvulsants and intensive care to maintain fluid and electrolyte balance, ensure adequate ventilation, and avoid complicating secondary bacterial infections. Patients should be treated in a screened room or in quarters treated with residual insecticide for at least five days after onset, or until afebrile (without fever) to foil mosquitoes since humans may remain infectious for mosquitoes for at least seventy-two hours. Isolation and qaurantine is not required. Standard Precautions should be practiced when dealing with infection control for VEE victims as shown below ... 

Biosafety Level 1 (BSL-1) Suitable for work involving well-characterized agents not known to consistently cause disease in healthy adults humans, and of minimal potential hazard to laboratory personnel and the environment requiring standard microbiological practices. 

Gravimetric analyses do not usually require standard solutions of any kind and do not require the calibration of any equipment beyond a balance. 

---