Legislative requirements

The building shall be designed and constnjcted so that there are appropriate provisions for the early warning of fire, and appropriate means of escape in case of fire from the building to a place of safety outside the building capable of being safely and effectively used at all material times. 

This section outlines the principles of horizontal and vertical escape within buildings and provides detailed guidance of how the requirement of B1 may be met. 

1) To inhibit the spread of fire within the building the internal linings shall 

2) In this paragraph internal linings means the materials lining any partition, wall, celling or other internal structure. 

This section provides definitions and classifications for the linings of ceilings and walls. 

---

Management of the environmental impact of projects is of major concern in the oil and gas industry, not only to meet the legislative requirements in host countries, but is also viewed as good business because it is ... 

The environmental performance of companies within the industry is normally subject to the legislative requirements of the host government, but is increasingly becoming scrutinised by the public, as available information and general levels of awareness increase. Major companies see responsible management of the environmental aspects of their operations as crucial to the future of their business. The approval of loans from major banks for project finance is usually conditional on acceptable environmental management. 

Table 2 Hsts some of the physical, toxicity, flammabiUty, and reactivity properties of common chemicals (10,13,42,45—51). Also given are some of the quantities specified for reporting spills and for compliance with legislated requirements. The OSHA regulations require that material safety data sheets (MSDS) be developed for all process materials, so that the ha2ard data can be communicated to employees (52). Characteristics of toxicity, flammabiUty, chemical iastabiUty, reactivity and reaction energy, operatiag coaditioas, and corrosive properties of constmction materials must all be considered ia analy2iag ha2ard poteatials of chemicals and chemical operations.

Tetracycline antibiotics have found wide application in animal industries for treatment, preventive maintenance and stimulation of growth of large horned livestock owing to what their residue amounts can be present at milk and meat of animals. Residue amounts of antibiotics are not toxic, however, capable to cause allergic reactions and to promote development of tolerance of the some people pathogenic bacterias. According with the legislative requirements of a number of the European countries it is forbidden to deliver to the population production polluted residual contents of tetracyclines. 

States also began to look at new products. Massachusetts promulgated legislation requiring its state energy office to set standards for fluorescent and incandescent lamps, and introduced legislation requiring standards for electric motors. Transformers were later added to the Massachusetts list. 

In addition, it is necessary to determine the time span of the design project and also assess how the Q system wiU be continuously reviewed and updated due to changes in the process, product recipe, legislative requirements, and other factors. 

Since food colorants are used as food additives, they must also comply with legislative requirements. Food legislation in the European Union (EU) and the United States (US) differs with regard to additives and labeling. Therefore, this section provides an overview of legislation in the EU (Section 7.1.6.1) and the US (Section 7.1.6.2) and discusses colorants permitted for use in food products according to the different requirements. 

This study has found that dmg regulation does not meet these requirements in all the countries studied. In some countries, legislation omits or exempts certain areas of pharmaceutical activity from the scope of control. In Australia, Malaysia and the Netherlands, legislation requires traditional/herbal medicines to be assessed and registered. But this is not the case in Cypms, Uganda or Zimbabwe. As a result of such gaps, dmg regulation provides only partial protection for consumers. 

The key legislative requirements are covered by the USA FDA 176.170 (aqueous fatty food contact), FDA 176.180 (dry food contact), FDA 176.230 (Thione use) and in Europe, the German BGVV 36 (food contact). Hence the preservatives used to protect these types of additives need to have these approvals in order to guarantee their safe use in the desired end application. 

Determination of extractability of stabilisers is a substantial part of the rating of stabiliser efficiency where leaching is a common deterioration effect or where legislation requires quantitative data dealing with... 

There is a large number of available guidelines. These cover a very wide range of topics, and the company submitting an application for a pharmaceutical product should be aware of the contents of these documents and how they interact with other guidelines as well as the interpretation of the legislative requirements. It is necessary to be aware of the impact of guidelines in all areas within the pharmaceutical sector and, in some cases, within the medical device sector. Some of these effects are not obvious from the titles of the documents. 

The text will be based on an interpretation of the legislative requirements and will include consideration of many of the available guidance documents. In addition, consideration has also been taken of published EPARs and the author s own experience of the European regulatory system (which extends over some 25 years). In case of doubt or disagreement, readers are referred to the original texts of the legislation, notes for guidance, and EPARs. 

The stack must be maintained above 80°C to avoid a visible plume, which might be a legislative requirement. If this is the case, the stack might need to be reheated before release. 

The objective must be to reduce atmospheric emissions to a minimum or at least below legislative requirements. However, there is inevitably some residual emission and this must be safely dispersed in the environment. The factors that affect the dispersion of gases to atmosphere are3 ... 

TIMESCALE AND LABELLING. It is not proposed to deal with the introduction of legislative requirements in detail but... 

The need for special facilities for work involving neutron activation analysis and radiochemical measurements has been referred to above in Section 4.3.6. Other safety factors may also influence your choice of method. For example, you may wish to avoid the use of methods which require toxic solvents, such as benzene and certain chlorinated hydrocarbons, or toxic reagents, such as potassium cyanide, if alternative procedures are available. Where Statutory Methods have to be used, there may be no alternative. In such cases, it is essential that staff are fully aware of the hazards involved and are properly supervised. Whatever method is used, the appropriate safety assessment must be carried out before the work is started. Procedures should be in place to ensure that the required safety protocols are followed and that everyone is aware of legislative requirements. 

In this case, the target range is chosen to ensure that laboratories obtaining a satisfactory score are producing results that are fit for a particular purpose. The chosen value is therefore related directly to a fitness for purpose statement, which may be derived from a legislative requirement. 

Netherlands and in France. By mid 1997, most azo pigments, due to their very low solubility, had been exempted [9]. The legislative requirements have been discussed [10]. A voluntary registration scheme for harmless dyestuffs is available and makes use of the Internet [11]. 

Although European Directives have been issued on legislative requirements for food contact plastics, European harmonisation of regulations for rubber or thermoplastic elastomers used in contact with food is yet... 

---