Thiolate

The various fonns of betaines are very important for their charge control functions in diverse applications and include alkylbetaines, amidoalkylbetaines and heterocyclic betaines such as imidazolium betaines. Some surfactants can only be represented as resonance fonns having fonnal charge separation, although the actual atoms bearing the fonnal charge are not ftmctionally ionizable. Such species are mesoionic and an example of a trizaolium thiolate is illustrated in table C2.3.3. 

Wang ZLetal 1998 Bundling and interdigitation of adsorbed thiolate groups in self-assembled nanoorystal superlattioes J. Phys. Chem. B 102 3068... 

Now we cany out the same reaction with thiolate as nucleophile, as shown in Figure 3-23. hlowever, we must now realize that the product has a parity of (+ 1) although we have the same mechanism as in Figure 3-22 with inversion of configuration. 

Nu = malonate anion, amines, thiolate anion, enamines, cuprates (usually requires double activation of cyclopropane)... 

Aminothiazole derivatives (243) can be prepared by treatment of enamines of type 240 with sulfur and cyanamide at room temperature in ethanol (701) yields range from 30 to 70%, and no catalyst is required. Initial formation of the thiolated intermediate (241) is probably followed by addition of cyanamide, yielding 242 (Scheme 124). 

The higher reactivity of 2-halogenothiazoles with respect to halogenopyridines can be related to the different aromaticity of the two systems, less for thiazole than for pyridine, for example, the relatively stronger fixation of the tt bond in the thiazole than in the case of pyridine. As the data reported in Table V-1 (footnote a) indicates, the free thiophenol is more reactive than the thiolate anion toward the 2-halogenothiazoles. This fact should be considered when one prepares the thiazolyl sulfides. 

A brief review has appeared covering the use of metal-free initiators in living anionic polymerizations of acrylates and a comparison with Du Font s group-transfer polymerization method (149). Tetrabutylammonium thiolates mn room temperature polymerizations to quantitative conversions yielding polymers of narrow molecular weight distributions in dipolar aprotic solvents. Block copolymers are accessible through sequential monomer additions (149—151) and interfacial polymerizations (152,153). 

Reaction of free-base porphyrin compounds with iton(II) salts in an appropriate solvent results in loss of the two N—H protons and insertion of iron into the tetradentate porphyrin dianion ligand. Five-coordinate iton(III) porphyrin complexes (hemins), which usually have the anion of the iton(II) salt for the fifth or axial ligand, ate isolated if the reaction is carried out in the presence of air. Iron(II) porphyrin complexes (hemes) can be isolated if the reaction and workup is conducted under rigorously anaerobic conditions. Typically, however, iton(II) complexes are obtained from iton(III) porphyrin complexes by reduction with dithionite, thiolate, borohydtide, chromous ion, or other reducing agents. 

Iron Sulfur Compounds. Many molecular compounds (18—20) are known in which iron is tetrahedraHy coordinated by a combination of thiolate and sulfide donors. Of the 10 or more stmcturaHy characterized classes of Fe—S compounds, the four shown in Figure 1 are known to occur in proteins. The mononuclear iron site REPLACE occurs in the one-iron bacterial electron-transfer protein mbredoxin. The [2Fe—2S] (10) and [4Fe—4S] (12) cubane stmctures are found in the 2-, 4-, and 8-iron ferredoxins, which are also electron-transfer proteins. The [3Fe—4S] voided cubane stmcture (11) has been found in some ferredoxins and in the inactive form of aconitase, the enzyme which catalyzes the stereospecific hydration—rehydration of citrate to isocitrate in the Krebs cycle. In addition, enzymes are known that contain either other types of iron sulfur clusters or iron sulfur clusters that include other metals. Examples include nitrogenase, which reduces N2 to NH at a MoFe Sg homocitrate cluster carbon monoxide dehydrogenase, which assembles acetyl-coenzyme A (acetyl-CoA) at a FeNiS site and hydrogenases, which catalyze the reversible reduction of protons to hydrogen gas. 

Several iron sulfide nitrosyl compounds are known. These have stmctures that in some cases are formally related to the FeS clusters by replacement of thiolate by NO. The compounds include the anions [Fe2S2(NO)4] and [Fe4S2(NO)2] (Roussin s red and black salts, respectively) and the neutral compounds [Fe2S2(NO)4] and [Fe4S4(NO)4]. Roussin s black salt has found use as a NO releasing vasodilator. 

Sequence analysis and mutagenesis experiments indicated that the thiolate ligand is provided by a-Cys-275 (163—165). These predictions have been... 

Phosphate triesters (18) are iatermediates ia both the phosphotriester and phosphoramidite methods, and under appropriate conditions for deprotection of the bases and cleavage of the support, can be obtained directiy by usiag these approaches. The ethyl and isopropyl esters have been obtained directiy by usiag the phosphoramidite method because these are stable duting the normal deprotection procedure (62). By changing the oxidizing agent to Sg, both amidate and triester thiolates can be obtained. 

Chemisorption of alkanethiols as well as of di- -alkyl disulfides on clean gold gives indistinguishable monolayers (251) probably forming the Au(l) thiolate species. A simple oxidative addition of the S—S bond to the gold surface is possibly the mechanism in the formation of SAMs from disulfides ... 

The energy barrier between the two chemisorption modes on Au(lll) is very small, 10.5 kj/mol, (2.5 kcal/mol), (211), suggesting that the thiolate may easily cross from one of these minima to the other, enabling a facile annealing mechanism. This predicts that changing tilt direction may occur well below the melting point of the monolayer, and should be chain-length-dependent. 

The fdr studies reveal that the alkyl chains in SAMs of thiolates on Au(lll) usually are tilted 26-28° from the surface normal, and display 52-55° rotation about the molecular axis. This tilt is a result of the chains reestabUshing VDW contact in an assembly with - 0.5 nm S—S distance, larger than the distance of - 0.46 nm, usually quoted for perpendicular alkyl chains in a close-packed layer. On the other hand, thiolate monolayers on Ag(lll) are more densely packed owing to the shorter S—S distance. There were a number of different reports on chain tilt in SAMs on Ag(lll), probably owing to different amounts of oxide, formed on the clean metallic surface (229,230,296,297). In carefully prepared SAMs of alkanethiolates on a clean Ag(lll) surface, the alkyl chains are practically perpendicular to the surface. 

For second-order NLO applications, the films need to be noncentrosymmetric. 4-Di(2-hydroxyethyl)amino-4 -a2oben2enephosphonate was used to form SAMs on 2irconium-treated phosphorylated surfaces. Further reaction with POCl and hydrolysis created a new phosphorylated surface that could be treated with 2irconium salt (341—343). The principal advantage of the phosphate systems is high thermal stabiUty, simple preparation, and the variety of substrates that can be used. The latter is especially important if transparent substrates are required. Thiolate monolayers are not transparent, and alkyltrichlorosilanes have a serious stabiUty disadvantage. 

In choosing a SAM system for surface engineering, there are several options. Silane monolayers on hydroxylated surfaces are an option where transparent or nonconductive systems are needed. However, trichlorosilane compounds are moisture-sensitive and polymeri2e in solution. The resulting polymers contaminate the monolayer surface, which occasionally has to be cleaned mechanically. CarboxyUc acids adsorb on metal oxide, eg, AI2O2, AgO through acid—base interactions. These are not specific therefore, it would be impossible to adsorb a carboxyUc acid selectively in the presence of, for example, a terminal phosphonic acid group. In many studies SAMs of thiolates on Au(lll) are the system of choice. 

Thiol—Disulfide Interchange Reactions. The interchange between thiols and disulfides has been reviewed (50). This reaction is base-catalyzed. It involves the nucleophihc attack of a thiolate ion on a disulfide. This is shown in equations 35, 36, and 37. 

Alkylthio- and arylthio-pyridazines can be prepared from the corresponding halo-substituted pyridazines by using appropriate alkyl and aryl thiolates. 

Many other examples are known of non-selective reactions of halo groups in pyridopyridazines with amines, alkoxides, sulfur nucleophiles such as hydrosulfide and thiolate ions, or thiourea, hydrazine(s), cyanide ion and dimethyl sulfoxide, or on catalytic reduction. 

---