Base product

The business plan needs to provide projections of aimual production. Based on those estimates and assumed food conversion rates (food conversion is calculated by determining the amount of feed consumed by the animals for each kilogram of weight gain), an estimate of feed costs can be made. For many aquaculture ventures, between 40 and 50% of the variable costs involved in aquaculture can be attributed to feed. 

Economic Aspects. There were 31 OSB plants in the United States in 1994 and these produced 6.625 x 10 m of OSB products (2). This industry is growing rapidly in both Canada and the United States. In fact, many of the composite mills currently under constmction are designed to produce OSB or similar products based on strands. Outside of North America, where building practices are not yet extensively utilizing the distinct advantages of the stud wall and plywood/OSB sheathing, there are only a few operating OSB plants. There are also small export markets for OSB products in Europe and the Far East. 

The unit has virtually the same flow sheet (see Fig. 2) as that of methanol carbonylation to acetic acid (qv). Any water present in the methyl acetate feed is destroyed by recycle anhydride. Water impairs the catalyst. Carbonylation occurs in a sparged reactor, fitted with baffles to diminish entrainment of the catalyst-rich Hquid. Carbon monoxide is introduced at about 15—18 MPa from centrifugal, multistage compressors. Gaseous dimethyl ether from the reactor is recycled with the CO and occasional injections of methyl iodide and methyl acetate may be introduced. Near the end of the life of a catalyst charge, additional rhodium chloride, with or without a ligand, can be put into the system to increase anhydride production based on net noble metal introduced. The reaction is exothermic, thus no heat need be added and surplus heat can be recovered as low pressure steam. 

Other Dimer Olefins. Olefins for plasticizer alcohols are also produced by the dimerization of isobutene [115-11-7] 4 8 codimerization of isobutene and / -butene [25167-67-3]. These highly branched octenes lead to a highly branched isononyl alcohol [68526-84-1] product. BASE, Ruhrchemie, ICl, Nippon Oxocol, and others have used this source. 

Theie aie only a few fat replacement products based on protein. LITA is a com protein—polysaccharide compound the role of the polysaccharide is to stabilize the protein (zein). The final product is 87% protein and 5% polysaccharide. The mixture, spray dried after processing, claims to look like cream on rehydration. It is low in viscosity, flavor, and lubricity, and is stable to mild heating. The protein particle size is 0.3—3 p.m (55). 

Medical appHcations of PFC emulsions for organ perfusion and intravenous uses have received much attention in recent years. The first commercial blood substitute (Fluosol DA 20%, trademark of the Green Cross Corp.) employed perfluorodecalin, and improved, second generation products based on this PFC, or perfluorooctylbromide, are now under development (20,21). The relatively high oxygen dissolving capabiHty of PFCs undedies these appHcations (see Blood, artificial). 

Methyl Chloride. Most of the HCl consumed in the manufacture of methyl chloride [74-87-3] from methanol (qv) is a recycled product. The further reaction of methyl chloride with chlorine to produce higher chlorinated methanes generates significant amounts of HCl which are fed back into methyl chloride production. Another source of recycled HCl is siUcone production based on methyl chloride. 

Liquid Fabric Softeners. The principal functions of fabric softeners are to minimize the problem of static electricity and to keep fabrics soft (see Antistatic agents). In these laundry additives, the fragrance must reinforce the sense of softness that is the desired result of their use. Most fabric softeners have a pH of about 3.5, which limits the materials that can be used in the fragrances. For example, acetals cannot be used because they break down and cause malodor problems in addition, there is the likelihood of discoloration from Schiff bases, oakmoss extracts, and some specialty chemicals. Testing of fragrance materials in product bases should take place under accelerated aging conditions (eg, 40°C in plastic bottles) to check for odor stabiUty and discoloration. 

Biodegradation studies of starch blends have not been conclusive where a nondegradable synthetic polymer has been the blend component probably biodisiategration would be a better term to describe these polymers. The principal deficiencies of products based on this chemistry, aside from the incomplete biodegradation, are water-sensitivity of manufactured articles, and the balance of this and biodegradation with the starch level ia the product. 

Table 6. Energy Required for Ammonia Production based on Feedstock Process, GJ/t...

Spin-On Glass. In microelectronic appHcations, films of siHcon dioxide are deposited on siHcon substrates by the appHcation of a partially hydroly2ed solution of tetraethoxysilane or methyltriethoxysilane (59,60). A product based on this technology is marketed under the name Accuspin by AHiedSignal. 

Attempts to produce synthetic mbber have been carried out since the 1800s. The introduction of automobiles in the early 1900s gave added impetus to find a substitute for natural mbber, the price of which tripled from 2.16/kg in 1900 to 6.73/kg in 1910 (1). The advent of World War I gave Germany incentive to start a crash program on an alternative to natural mbber. From this work, products based on dimethylbutadiene were used, but these were not found to be good substitutes. 

When a battery produces current, the sites of current production are not uniformly distributed on the electrodes (45). The nonuniform current distribution lowers the expected performance from a battery system, and causes excessive heat evolution and low utilization of active materials. Two types of current distribution, primary and secondary, can be distinguished. The primary distribution is related to the current production based on the geometric surface area of the battery constmction. Secondary current distribution is related to current production sites inside the porous electrode itself. Most practical battery constmctions have nonuniform current distribution across the surface of the electrodes. This primary current distribution is governed by geometric factors such as height (or length) of the electrodes, the distance between the electrodes, the resistance of the anode and cathode stmctures by the resistance of the electrolyte and by the polarization resistance or hinderance of the electrode reaction processes. 

Several of the products discussed herein are under intense development. One product, based on recombinant hemoglobin, is in early human trials as of this writing. Other hemoglobin-based solutions are also under review at the EDA. Replacement of red blood cells using massive amounts of protein, free in solution, is an unprecedented therapeutic adventure. 

Production from sodium borate ores takes place in the United States, Turkey, and Argentina. AH U.S. production based on sodium borate ores is from the United States Borax Chemical Corp. in Boron, California. Turkish mining of tincal takes place at Kirka. This operation is under the control of the Turkish government and its representative, Etibank. Argentine production is carried out at Tincalayu, primarily by Boroquimica Samicaf. 

Producers of PAN-based carbon fiber include Toray, Toho Beslon, Mitsubishi Rayon, and Asahi Kasai Carbon in Japan Hercules, Amoco Performance Products, BASE Stmctural Materials, Eortafil (Akzo), and Mitsubishi Rayon in the United States and Akzo, Sigri, and Soficar in Europe. Primary suppHers of high performance pitch-based carbon fibers include Amoco Performance Products, Mitsubishi Kasai, and Tonen Corp. 

Product formation kinetics in mammalian cells has been studied extensively for hybridomas. Most monoclonal antibodies are produced at an enhanced rate during the Gq phase of the cell cycle (8—10). A model for antibody production based on this cell cycle dependence and traditional Monod kinetics for cell growth has been proposed (11). However, it is not clear if this cell cycle dependence carries over to recombinant CHO cells. In fact it has been reported that dihydrofolate reductase, the gene for which is co-amplified with the gene for the recombinant protein in CHO cells, synthesis is associated with the S phase of the cell cycle (12). Hence it is possible that the product formation kinetics in recombinant CHO cells is different from that of hybridomas. 

Chloriaated paraffias and modified types are used as solvents ia carbonless copyiag paper production based on the encapsulation of a solution of reactive dyes. Chloriaated paraffias fiiUfill the technical requirements for a solvent including excellent solvency for the dyes they do not react with the dyes nor encapsulation material, are immiscible with water, and have low volatihty and low odor. 

Milk. Imitation milks fall into three broad categories filled products based on skim milk, buttermilk, whey, or combinations of these synthetic milks based on soybean products and toned milk based on the combination of soy or groundnut (peanut) protein with animal milk. Few caseinate-based products have been marketed (1,22,23). Milk is the one area where nutrition is of primary concern, especially in the diets of the young. Substitute milks are being made for human and animal markets. In the latter area, the emphasis is for products to serve as milk replacers for calves. The composition of milk and filled-milk products based on skim milk can be found in Table 10. Table 15 gives the composition of a whey /huttermilk-solids-hased calf-milk replacer, which contains carboxymethyl cellulose (CMC) for proper viscosity of the product. 

---