Methyl acrylate-ethyl acetate copolymer

Poly(vinyl alcohol) is utilized as a component of starch-based adhesives.11121114 Other patents report the use of partially oxidized starch,1115 dextrins,1116 dextrins and urea,1117 borax,1118 boric acid,1119 and vinyl methyl ether-maleic acid copolymers.1120 Other patents indicate the use of poly (vinyl alcohol) with partially hydrolyzed poly(vinyl acetate),1121 nonhy-drolyzed poly(vinyl acetate),1122 and poly(vinyl chloride).1123 A few patents have reported such poly acrylic additives as poly (acrylic acid)1124 and its salts,1125 poly(acrylamide),1126 1127 A-methylacrylamide or poly(A-acryl-amide),1128 and polyethyleneimine.1129 Polystyrene has also been used,1130 as well as more complex copolymers such as a maleic acid monobutyl ester-methyl vinyl ether copolymer, together with dextrin and polyacrylamide),1131 carboxylated ethyl acrylate-styrene zinc salt copolymer,1132 ethylene-methyl acrylate-vinyl acetate copolymer,1133 vinyl acetate-vinyl pyr-rolidone copolymer,1134 and ethylene-vinyl acetate copolymer.1135 Some adhesives are compounded with SBR latex1136 1138 and phenol-formaldehyde resins.1139... 

Copolymer from methyl methacrylate and butyl acrylate Copolymer from methyl methacrylate, butyl acrylate, diallyl maleate, and trimethylol propane triacrylate Methyl methacrylate-ethyl acrylate copolymer Methyl methacrylate-methyl acrylate copolymer Methyl methacrylate-co-A -phenylmaleimide copolymer Copolymer from methyl methacrylate and a-methyl styrene Methyl methacrylate-vinyl acetate copolymer Copolymer of methyl methacrylate, vinyl acetate, and acrylic acid... 

Scheme 24 Cumulative (/vAc.cum) and instantaneous (/vAcjnst) VAc contents in methyl acrylate-vinyl acetate (MA-VAc) copolymers as a function of total conversion [VAc]o = [MA]o = 2.0M (in 1 n -C6H4 [(CF3)2C0H]2) or 5.1 M (in bulk) [VAc]o/[MA]o/[ethyl-2-iodoisobutyrate]o/ [Mn2(CO)io]o = 100/100/1/1. Reproduced with permission from Koumura, K. Satoh, K. Kamigaito, M. J. Polytn. Sci., Part A Polym. Chem. 2009, 47,1343. Copyright 2009 John Wiley and Sons.

Under conditions of extreme acidity or alkalinity, acryhc ester polymers can be made to hydroly2e to poly(acryhc acid) or an acid salt and the corresponding alcohol. However, acryhc polymers and copolymers have a greater resistance to both acidic and alkaline hydrolysis than competitive poly(vinyl acetate) and vinyl acetate copolymers. Even poly(methyl acrylate), the most readily hydroly2ed polymer of the series, is more resistant to alkah than poly(vinyl acetate) (57). Butyl acrylate copolymers are more hydrolytically stable than ethyl acrylate copolymers (58). 

An a priori method for choosing a surfactant was attempted by several researchers (50) using the hydroph i1 e—1 ip oph i1 e balance or HLB system (51). In the HLB system a surfactant soluble in oil has a value of 1 and a surfactant soluble in water has a value of 20. Optimum HLB values have been reported for latices made from styrene, vinyl acetate, methyl methacrylate, ethyl acrylate, acrylonitrile, and their copolymers and range from 11 to 18. The HLB system has been criticized as being imprecise (52). 

Uses Copolymerized with methyl acrylate, methyl methacrylate, vinyl acetate, vinyl chloride, or 1,1-dichloroethylene to produce acrylic and modacrylic fibers and high-strength fibers ABS (acrylonitrile-butadiene-styrene) and acrylonitrile-styrene copolymers nitrile rubber cyano-ethylation of cotton synthetic soil block (acrylonitrile polymerized in wood pulp) manufacture of adhesives organic synthesis grain fumigant pesticide monomer for a semi-conductive polymer that can be used similar to inorganic oxide catalysts in dehydrogenation of tert-butyl alcohol to isobutylene and water pharmaceuticals antioxidants dyes and surfactants. 

Copolymers of acrylonitrile and methyl acrylate and terpolymers of acrylonitrile, styrene, and methyl methacrylate are used as bamer polymers. Acrylonitrile copolymers and multipolymers containing butyl acrylate, ethyl aciylate, 2-ethylhexyl acrylate, hydroxyethyl acrylate, methyl methaciylate. vinyl acetate, vinyl ethers, and vinylidene chlonde are also used in bamer films, laminates, and coatings. Environmentally degradable polymers useful in packaging are prepared from polymerization of acrylonitrile with styrene and methyl vinyl ketone. 

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... 

Traditionally the inks were based on organic solvents, comprising solutions of binder resins such as vinyl chloride polymers, vinyl chloride-acetate copolymers and acrylics in toluene/methyl ethyl ketone or ethanol/ethyl acetate— pigments, flattening agents, waxes, and other substances being added as required to enhance performance. More recently, because of the desire to... 

Mesophases prepared by dissolution of the copolymer in a preferential solvent for the poly(vinylpyridine) block (acrylic acid, nitromethane, dfoxane, octanol, methylethyl ketone, ethyl acetate, vinyl acetate, styrene and methyl methaaylate) and dry copolymers obtained by slow evaporation of the solvent from the mesophases have been studied by low-angle X-r diffraction electron microscopy Copolymers of isoprene and vinylpyridine exhibit cylindrical hexagonal or lamellar structures dependii upon their comi siton.The influence of the nature, concentration, and polymerization of the solvent, molecular weight and composition of the copolymer, microstructure of the polyisoprene block, and position of the nitrogen atom in the vinylpyridine block on the values of the geometrical parameters of the periodic structures have been establidied ... 

New macroradicals have been obtained by proper solvent selection for the homopolymerization of styrene, methyl methacrylate, ethyl acrylate, acrylonitrile, and vinyl acetate, and by the copolymerization of maleic anhydride with vinyl acetate, vinyl isobutyl ether, or methyl methacrylate. These macroradicals and those prepared by the addition to them of other monomers were stable provided they were insoluble in the solvent. Since it does not add to maleic anhydride chain ends, acrylonitrile formed a block copolymer with only half of the styrene-maleic anhydride macroradicals. However, this monomer gave excellent yields of block polymer when it was added to a macroradical obtained by the addition of limited quantities of styrene to the original macroradical. Because of poor diffusion, styrene did not add to acrylonitrile macroradicals, but block copolymers formed when an equimolar mixture of styrene and maleic anhydride was added. 

Polyethylene (PE) is a family of addition polymers based on ethylene. Polyethylene can be linear or branched, homopolymer, or copolymer. In the case of a copolymer, the other comonomer can be an alkene such as propene, butene, hexene, or octene or a compound having a polar functional group such as vinyl acetate (VA), acrylic acid (AA), ethyl acrylate (EA), or methyl acrylate (MA). If the molar percent of the comonomer is less than 10%, the polymer can be classified as either a copolymer or homopolymer. Figure 4.1 presents a diagram of the family of polymers based on ethylene monomer. 

DIethylenelilamlne Tetraethylenepentamlne solvent, acryl MethoxybulyJ acetate solvent, acrylic coatings Hexyl acetate Methyl ethyl ketone solvent, acrylic copolymers DIethylene glycol propyl ether, Eastman DP Eastman PM Acetate Ethylan ... 

Many acrylic copolymers are currently used in the textile industry as binders for nonwoven fabrics. The purpose of these fibers is to stabilize the material. In many instances, these copolymers are used in conjunction with amino resins. Casanovas and Rovira have done a study of methyl methacrylate-ethyl acrylate-N-methylol-acrylamide by PY/GC-MS. Among the products identified were methane, ethylene, propene, isobutene, methanol, propionaldehyde, ethanol, ethyl acetate, methyl acrylate, methyl isobutyrate, ethyl acrylate, methyl methacrylate, n-propyl acrylate, and ethyl methacrylate. In this sample, clearly monomer reversion is the primary degradation process occurring however, several other degradation mechanisms are at work. When the sample contains an amino resin in the mixture, acrylonitrile is observed in the pyrogram. Another effect of the amino presence was a marked increase in the amount of methanol detected. Other products detected were meth-oxyhydrazine, methyl isocyanate, and methyl isocyanide. 

EM 35. See Milk protein EM-40. See Glyceryl tall ate EM 65. See Sodium caseinate EM 375. See Milk protein EM-600. See PEG-12 tallate EM LV. See Sodium caseinate EM-PB EM-WS. See Lard oil EMA. See Ethylene/methyl acrylate copolymer Ethyl methacrylate Ethylene/MA copolymer EMA. See Methoxyethanol acetate EMAA. See Ethylene/methacrylic acid copolymer... 

Nitrocellulose, polyester, acrylic and methacrylic ester copolymer, formaldehyde resin, rosin, cellulose acetate butyrate are the most frequently used polymers in nail polish formulations. Solvents were selected to suit the polymer used. These include acetone, methyl acetate, ethyl acetate, butyl acetate, methyl glycol acetate, methyl ethyl ketone, methyl isobutyl ketone, toluene, xylene, isopropyl alcohol, methyl chloroform, and naphtha. Solvents constitute a substantial Ifaction of the composition usually around 70%. Reformulation is ongoing to improve the flexibility and durability of the nail polish. Other efforts are directed to improve antifungal properties,to eliminate ketones and formaldehyde resin (ketones because of their toxicity and irritating smell and formaldehyde resins because they contribute to dermatitis), and elimination of yellowing. All efforts are di-... 

See also ethylene acrylic acid copolymer ethylene ethyl acrylate copolymer ethylene methyl acrylate copolymer ethylene n-butyl acrylate copolymer ethylene vinyl acetate copolymer ethylene vinyl alcohol. 

Poly (methyl vinyl ketone), poly (isopropyl vinyl ketone), ethylene-carbon monoxide copolymers Poly(vinyl acetate), poly (methyl acrylate), poly (ethyl acrylate), poly (methyl methacrylate), poly (butyl acrylate), ethylene-vinyl acetate copolymers Poly (acrylic acid),... 

Chem ical RasiStanCG. Acrylic polymers and copolymers are highly resistant to hydrolysis. This property differentiates acrylic polymers from poly(vinyl acetate) and vinyl acetate copolymers. When exposed to highly extremely acidic or alkaline environments, acrylic ester polymers can hydrolyze to poly(acrylic acid) and the corresponding alcohol. Resistance to hydrolysis decreases in the order butyl acrylate > ethyl acrylate > methyl acrylate. Although it is the least hydrolytically stable, methyl acrylate is still far more resistant to hydrolysis than vinyl acetate (57,58). 

LDPE Copolymers. A variety of comonomers can be added to the polymerization of ethylene to make copolymers. The free-radical polymerization mechanism of LDPE production allows for the copolymerization of polar comonomers. At this time, the incorporation of polar comonomers is unique to LDPE. The transition metals used to catalyze HDPE and LLDPE production are generally poisoned by polar comonomers and therefore, only copolymers containing alpha-olefins like 1-butene, 1-hexene, and 1-octene can be made. Because the polar copolymers can be made only by the LDPE process, they command a premium in the market. The most common comonomers (and their corresponding copol5uners) are vinyl acetate (EVA), methyl acrylate (EMA), ethyl acrylate (EEA), and acrylic acid... 

The first useful acrylic PSAs were introduced in the 1950s with the incorporation of high Tg functional monomers (23), such as acrylic acid and acrylamide, used for reinforcement. This continues to be a widely used approach for acrylic PSA reinforcement. Typical acrylic PSAs contain up to 10% of these reinforcing monomers. Additional high Tg, but nonfunctional, monomers may also be added to the copolymer, with some typical examples being vinyl acetate, ethyl acrylate, methyl acrylate, and methyl methacrylate. 

Despite the universal adoption of PVC, some investigations have centred on the prospect of alternative matrix materials. Except for poly(vinylisobutyl ether) (71), poly(methyl methyl acrylate) (72), poly(methyl acrylate) (39) and poly(vinyl chloride/alcohol) copolymer (73), practically no functional calcium ISEs were realized with poly(vinylidene chloride) (19), cellulose acetate, ethyl cellulose, collodion or pyroxylin (11). Photocured sensor membranes based on acrylates are considered in section 3.4.4. 

Acetone and methyl ethyl ketone are components of solvent blends in urethane, nitrile rubber, and neoprene industrial adhesives. Acetone is the primary solvent in resin-type adhesives and pressure sensitive chlorinated rubber adhesives. Methyl isobutyl ketone is a solvent component for nitrile rubber and acrylic adhesives as well as in polyvinyl chloride and polyvinyl chloride-polyvinyl acetate copolymer bonding adhesives. Again, the desired evaporation rate of the adhesive formulation will often determine the ketone selected. 

The monomers which have been investigated include methyl methacrylate, ethyl acrylate ester, hydroxy acrylates and methacrylates, acrylonitrile, vinyl acetate, vinyl chloride, acrylamide, vinylidene chloride, acrylic acid, vinyl pyrollidone and styrenec Many copolymer latexes of these monomers have also been preparedc Undoubtedly the most amenable system for model studies is methyl methacrylate in aliphatic hydrocarbono... 

---