Methyl methacrylate acrylonitrile butadiene styrene

ISO 10366-1 2002 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1 Designation system and basis for specifications ISO 10366-2 2003 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2 Preparation of test specimens and determination of properties... 

MABS methyl methacrylate-acrylonitrile-butadiene-styrene... 

MABS polymers (methyl methacrylate-acrylonitrile-butadiene-styrene) together with blends composed of polyphenylene ether and impact-resistant polystyrene (PPE/PS-I) also form part of the styrenic copolymer product range. Figure 2.1 provides an overview of the different classes of products and trade names. A characteristic property is their amorphous nature, i.e. high dimensional stability and largely constant mechanical properties to just below the glass transition temperature, Tg. 

Other Impact-Modified Commercial Grafting-Based Polymers Typical HIPS and ABS polymers are opaque materials however, MABS (methyl methacrylate-acrylonitrile-butadiene-styrene) polymers, which are produced by processes similar to those used in the production of ABS, are transparent materials. This property is obtained by the addition of methyl methacrylate (MMA) to the recipe in order to impart transparency to the polymer by equalizing the refracting index of the rubber particles to that of the matrix. These materials find applications... 

PLA has also been blended with other nonbiodegradable polymers, such as poly(methyl methacrylate), acrylonitrile-butadiene-styrene, and Hytrel (from DuPont). Note that some polymers such as PE and PP are not compatible with PLA and cannot be used for compounding, unless special compatibilizers are used. 

Methyl methacrylate-acrylonitrile-butadiene-styrene Methyl methacrylate-butadiene-styrene terpolymer Methyl cellulose... 

Methyl Methacrylate-Acrylonitrile-Butadiene-Styrene (MABS) Polymer... 

Terlux methyl methacrylate—acrylonitrile— butadiene—styrene polymer (MABS) apphcations properties processing. BASF 2003. 

MABS Methyl methacrylate-acrylonitrile—butadiene—styrene... 

The stabilization of poly(vinyl chloride) against light has been reviewed by Wirth and Andreas. Detailed mechanistic studies have indicated the importance of peroxides in the process of photo-oxidation. It was suggested that protection could be successfully achieved by exclusion of radiation of A < 380 nm. E.s.r. examination of irradiated samples demonstrated the intervention of peroxides in the mechanisms with the ultimate formation of carbonyl groups which caused chain scission by Norrish cleavage. Photo-oxidation of samples of poly(vinyl chloride) modified by incorporation of acrylonitrile-butadiene-styrene, methyl methacrylate-butadiene-styrene, and methyl methacrylate-acrylonitrile-butadiene-styrene copolymers has been investigated. Discolouration was accelerated by the presence of the modifiers. Thermal pre-treatment accelerated photo-induced decomposition. Mechanical properties were also examined, and scanning electron microscopy showed surface defects due to decomposition of the modifier. ... 

The polyblends show differences amongst themselves. Acrylonitrile-butadiene-styrene (ABS) polyblend is more sensitive to thermal oxidation than methyl methacrylate-butadiene-styrene (MBS) polyblend or methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) polyblend. Consequently, processed ABS photo-oxidises with little or no induction period. 

MBS = methyl methacrylate—butadiene—styrene and MABS = methacrylate-acrylonitrile—butadiene—styrene. 

Besides the MBS materials, related terpolymers have been prepared. These include materials prepared by terpolymerising methyl methacrylate, acrylonitrile and styrene in the presence of polybutadiene (Toyolac, Hamano 500) methyl methacrylate, acrylonitrile and styrene in the presence of a butadiene-methyl methacrylate copolymer (XT Resin), and methylacrylate, styrene and acrylonitrile on to a butadiene-styrene copolymer. 

Copolymer from methyl methacrylate, acrylonitrile, butadiene, and styrene... 

Methacrylate acrylonitrile butadiene styrene (MABS) copolymer is similar to ABS except for the addition of an additional monomer, usually methyl methacrylate. It is an amorphous, clear, transparent material with the thermal and mechanical properties like those of ABS. The transparency is achieved by matching the refractive indices of the matrix resin... 

There are various requirements for impact-modified PVC. The most demanding is for outdoor sidings and window frames, where lifetimes of 20 years are expected. Because butadiene polymers or copolymers (e.g., acrylonitrile/butadiene/styrene (ABS), methyl methacrylate/butadiene/styrene (MBS)) are susceptible to UV degradation these polymers are usually not employed instead acrylate polymers are used for these applications. 

Uses Copolymerized with methyl acrylate, methyl methacrylate, vinyl acetate, vinyl chloride, or 1,1-dichloroethylene to produce acrylic and modacrylic fibers and high-strength fibers ABS (acrylonitrile-butadiene-styrene) and acrylonitrile-styrene copolymers nitrile rubber cyano-ethylation of cotton synthetic soil block (acrylonitrile polymerized in wood pulp) manufacture of adhesives organic synthesis grain fumigant pesticide monomer for a semi-conductive polymer that can be used similar to inorganic oxide catalysts in dehydrogenation of tert-butyl alcohol to isobutylene and water pharmaceuticals antioxidants dyes and surfactants. 

Emulsion polymerization is used for 10-15% of global polymer production, including such industrially important polymers as poly(acrylonitrile-butadiene-styrene) (ABS), polystyrene, poly(methyl methacrylate), and poly (vinyl acetate) [196]. These are made from aqueous solutions with high concentrations of suspended solids. The important components have unsaturated carbon-carbon double bonds. Raman spectroscopy is well-suited to address these challenges, though the heterogeneity of the mixture sometimes presents challenges. New sample interfaces, such as WAI and transmission mode, that have shown promise in pharmaceutical suspensions are anticipated to help here also. 

Methyl methacrylate-butadiene-styrene (MMBS) types are rarely used as such, but rather in blends as impact modifiers (1). Styr-enic copolymers such as acrylonitrile-butadiene-styrene (ABS) and MMBS make up the largest category of impact modifiers, with about 45% of the impact modifier market (2). The field of polymer blends and the reasons for the addition of impact modifiers have been reviewed (3). 

The MABS copolymers are prepared by dissolving or dispersing polybuiadiene rubber in a methyl methacrylate—acrylonitrile—styrene monomer mixture. MBS polymers are prepared by grafting methyl methacrylate and styrene onto a styrene—butadiene rubber in an emulsion process. The product is a two-phase polymer useful as an impact modifier for rigid polytvinyl chloride). 

Comparison of Methyl Methacrylate-Butadiene-Styrene with Acrylonitrile-Butadiene—Styrene Graft Copolymers... 

This study was therefore undertaken to prepare and evaluate acrylonitrile—butadiene-styrene (ABS) and methyl methacrylate-butadiene-styrene (MBS) polymers under similar conditions to determine whether replacement of acrylonitrile by methyl methacrylate could improve color stability during ultraviolet light aging, without detracting seriously from the good mechanical and thermal-mechanical properties of conventional ABS plastics. For purposes of control, the study also included briefer evaluation of commercial ABS, MBS, and acrylonitrile-butyl acrylate-styrene plastics. 

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... 

The thermoplastic polymers we studied included the polyolefins as polyethylene and polypropylene the polyacrylates and methacrylates as poly (methyl methacrylate) styrene polymers including both clear and impact types and acrylonitrile-butadiene-styrene (ABS) plastics. Fire retardance was evaluated by the D-635 procedure as described previously (19). 

Methods have been developed for the analysis of hydrocarbon polymers (e.g. styrene, butadiene and isoprene) by MALDI-TOF-MS, through the attachment of Ag(acac) to matrices of tran5-3-indoleacrylic acid or l,4-bis(2-(5-phenyloxazolyl))benzene . SUver-cationized molecular ions were produced for polymers of styrene, butadiene and isoprene up to mass 125,000 Da. For lower-mass styrene polymers, the resolved oligomer molecular ions provide information concerning the end group. This technique permits the analysis of many commercially important materials such as acrylonitrile-butadiene-styrene (ABS), styrene-acrylonitrile, styrene-methyl methacrylate and styrene-isoprene copolymers. The use of the salts of transition metals other than Ag, Cu or Pd as the cationizing agents fails to cationize polystyrenes in MALDI. The ability of MALDI to reduce metals to the oxidation state 4-1 is critically important to polystyrene cationization, as without this reduction MALDI tends to fail to form polystyrene-metal cations. Cu(acac)2 was used for the verification of the above . 

Numerous other copolymers of styrene are known, such as poly(acrylonitrile-co-styrene-co-ethylene), or poly(methyl methacrylate-co-butadiene-co-styrene), which is utilized in making blister-packaging, disposable medical instruments, containers, etc. The frequent utilization of styrene copolymers in practice has been associated with a considerable number of studies regarding pyrolysis and thermal behavior of these copolymers [68-86]. Some of these studies are summarized in Table 6.2.3. 

---