Esters ethyl acrylate

Diels-Alder reactions in the presence of Lewis acids represent a case in which the Lewis acid is often used in catalytic quantities. The complexed ester (ethyl acrylate in the example given below) is substantially more reactive than the uncomplexed molecule, and the reaction proceeds through the complex. The reactive complex is regenerated by exchange of the Lewis acid from the adduct. 

The choice of acrylic ester, and hence its polarity, determines the low temperature flexibility, and the heat and chemical resistance of the polymer both alkyl and alkoxy acrylic esters are used as monomers. Within the alkyl acrylic esters, ethyl acrylate has the highest polarity and hence gives... 

The Michael reaction involves conjugate addition of a nucleophile onto an a,P-unsaturated carbonyl compound, or similar system. Such reactions take place in nature as well, and some can be potentially dangerous to us. For example, the a,P-unsaturated ester ethyl acrylate is a cancer suspect agent. This electrophile can react with biological nucleophiles and, in so doing, bind irreversibly to the nucleophile, rendering it unable to carry out its normal functions. A particularly important enzyme that can act as a nucleophile is DNA polymerase, which is responsible for the synthesis of strands of DNA, especially as part of a DNA repair mechanism (see Section 14.2.2). The nucleophilic centre is a thiol grouping, and this may react with ethyl acrylate as shown. 

The 4-phospha-1,3-butadiene 77/80 serves as an effective synthon for the unknown H-substituted nitrile ylide 79 in [3+ 2]-cycloaddition reactions with a range of electron-poor dipolarophUes (e.g., reaction with DMAD gave 78 in 80% yield). Similar yields were also obtained using methyl propiolate, azodicaboxylic esters, ethyl acrylate, and acrylonitrile (39). The reactant was generated under very mild conditions from 75 as shown below. 

Ethyl Acetate under Esters Ethyl Acrylate under Esters... 

The ylidic l-phenylimino-2,4,5-triphenyl-l,2,3-triazole (411) cf. Section 4.11.4.6) has been shown to be an effective 1,3-dipolar system which can be reacted smoothly with CS2, PhNCS, alkynic esters, ethyl acrylate and acrylonitrile to give [3 + 2] cycloadducts, e.g. (412). Upon photolysis or thermolysis the 2,4,5-triphenyl-2if-triazole (413) is formed... 

Ethyl 2-acetyl-3-phenylpropionate Ethyl aconitate, mixed esters Ethyl acrylate Ethyl-p-anisate Ethyl anthranilate Ethyl benzoate Ethyl benzoylacetate a-Ethylbenzyl butyrate... 

Acrylic Acid Ethyl Ester Ethyl Acrylate Ethyl Propenoate Diisobutyl Adipate Butyl Acrylate... 

Ethyl acrylate (2-propenoic acid ethyl ester)... 

Acetylene-Based Routes. Walter Reppe, the father of modem acetylene chemistry, discovered the reaction of nickel carbonyl with acetylene and water or alcohols to give acryUc acid or esters (75,76). This discovery led to several processes which have been in commercial use. The original Reppe reaction requires a stoichiometric ratio of nickel carbonyl to acetylene. The Rohm and Haas modified or semicatalytic process provides 60—80% of the carbon monoxide from a separate carbon monoxide feed and the remainder from nickel carbonyl (77—78). The reactions for the synthesis of ethyl acrylate are... 

The stoichiometric and the catalytic reactions occur simultaneously, but the catalytic reaction predominates. The process is started with stoichiometric amounts, but afterward, carbon monoxide, acetylene, and excess alcohol give most of the acrylate ester by the catalytic reaction. The nickel chloride is recovered and recycled to the nickel carbonyl synthesis step. The main by-product is ethyl propionate, which is difficult to separate from ethyl acrylate. However, by proper control of the feeds and reaction conditions, it is possible to keep the ethyl propionate content below 1%. Even so, this is significantly higher than the propionate content of the esters from the propylene oxidation route. 

Under conditions of extreme acidity or alkalinity, acryhc ester polymers can be made to hydroly2e to poly(acryhc acid) or an acid salt and the corresponding alcohol. However, acryhc polymers and copolymers have a greater resistance to both acidic and alkaline hydrolysis than competitive poly(vinyl acetate) and vinyl acetate copolymers. Even poly(methyl acrylate), the most readily hydroly2ed polymer of the series, is more resistant to alkah than poly(vinyl acetate) (57). Butyl acrylate copolymers are more hydrolytically stable than ethyl acrylate copolymers (58). 

Emulsion Polymerization. Emulsion polymerization is the most important industrial method for the preparation of acryhc polymers. The principal markets for aqueous dispersion polymers made by emulsion polymerization of acryhc esters are the paint, paper, adhesives, textile, floor pohsh, and leather industries, where they are used principally as coatings or binders. Copolymers of either ethyl acrylate or butyl acrylate with methyl methacrylate are most common. 

AH-acryHc (100%) latex emulsions are commonly recognized as the most durable paints for exterior use. Exterior grades are usuaHy copolymers of methyl methacrylate with butyl acrylate or 2-ethyIhexyl acrylate (see Acrylic ester polymers). Interior grades are based on methyl methacrylate copolymerized with butyl acrylate or ethyl acrylate. AcryHc latex emulsions are not commonly used in interior flat paints because these paints typicaHy do not require the kind of performance characteristics that acryHcs offer. However, for interior semigloss or gloss paints, aH-acryHc polymers and acryHc copolymers are used almost exclusively due to their exceUent gloss potential, adhesion characteristics, as weU as block and print resistance. 

The earliest study describing vulcanised polymers of esters of acryUc acid was carried out in Germany by Rohm (2) before World War I. The first commercial acryUc elastomers were produced in the United States in the 1940s (3—5). They were homopolymers and copolymers of ethyl acrylate and other alkyl acrylates, with a preference for poly(ethyl acrylate) [9003-32-17, due to its superior balance of properties. The main drawback of these products was the vulcanisation. The fully saturated chemical stmcture of the polymeric backbone in fact is inactive toward the classical accelerators and curing systems. As a consequence they requited the use of aggressive and not versatile compounds such as strong bases, eg, sodium metasiUcate pentahydrate. To overcome this limitation, monomers containing a reactive moiety were incorporated in the polymer backbone by copolymerisation with the usual alkyl acrylates. 

Ethyl Acrylate. The esterification of acryflc acid is a primary use for ethanol. Acryflc acid can also react with either ethylene or ethyl esters of sulfuric acid. 

These processes have supplanted the condensation reaction of ethanol, carbon monoxide, and acetylene as the principal method of generating ethyl acrylate [140-88-5] (333). Acidic catalysts, particularly sulfuric acid (334—338), are generally effective in increasing the rates of the esterification reactions. Care is taken to avoid excessive polymerisation losses of both acryflc acid and the esters, which are accentuated by the presence of strong acid catalysts. A synthesis for acryflc esters from vinyl chloride (339) has also been examined. 

Chemical Designations - Synonyms Acrylic acid. Ethyl ester Ethyl 2-propenoate Chemical Formula CH,=CH.COOCRfCay... 

The addition of diazomethane to unsaturated esters (1), as ethyl acrylate, methyl crotonate and ethyl cinnamate, was investigated by Auwers who showed that the primary addition product is a A -pyrazoline (2) which rearranges spontaneously to the conjugated A -pyrazoline (3). 

---