Matrix assisted laser ionization

Mass spectrometry requires that the material being studied be converted into a vapor. Great strides have been taken in recent years to address this problem, especially in enticing large, thermally fragile (bio)molecules into the vapor state. Matrix assisted laser ionization-desorption (MALDI) and electrospray ionization (ESI) are two current forefront methods that accomplish this task. Even components of bacteria and intact viruses are being examined with these approaches. John B. Fenn and Koichi Tanaka shared in the award of a Nobel Prize in 2002 for their respective contributions to development of electrospray ionization and soft laser desorption. 

Mass spectrometry and gas-phase ion chemistry of phenols concerns this class of compounds and, in particular, the various types of gaseous ions formed from them, as objects of fundamental interest and analytical signihcance. However, in the special case of phenols, a mass spectrometry with phenols has been developed. As mentioned in the Introduction, one of the modern methodologies for the formation of ions from polar and/or high-molecular mass, and thus non-volatile, organic and bioorganic compounds, relies on the use of various phenolic compounds as matrices for ion generation. Matrix-assisted laser ionization/desorption has become one of the major essential ioniza-... 

Infrared spectral studies were done utilizing a Mattson Instruments Galaxy 4020 FTIR employing potassium bromide pellets. All spectra were recorded at an instrument resolution of 4 cm using 32 scans. Mass spectra were obtained utihz-ing a HP Mdl. G2025A MALDI-TOF (matrix-assisted laser ionization time-of-flight) mass spectrophotometer. 

A connnon feature of all mass spectrometers is the need to generate ions. Over the years a variety of ion sources have been developed. The physical chemistry and chemical physics communities have generally worked on gaseous and/or relatively volatile samples and thus have relied extensively on the two traditional ionization methods, electron ionization (El) and photoionization (PI). Other ionization sources, developed principally for analytical work, have recently started to be used in physical chemistry research. These include fast-atom bombardment (FAB), matrix-assisted laser desorption ionization (MALDI) and electrospray ionization (ES). 

FigureBl.7.2. Schematic representations of alternative ionization methods to El and PI (a) fast-atom bombardment in which a beam of keV atoms desorbs solute from a matrix (b) matrix-assisted laser desorption ionization and (c) electrospray ionization.

Until about the 1990s, visible light played little intrinsic part in the development of mainstream mass spectrometry for analysis, but, more recently, lasers have become very important as ionization and ablation sources, particularly for polar organic substances (matrix-assisted laser desorption ionization, MALDI) and intractable solids (isotope analysis), respectively. 

Some solid materials are very intractable to analysis by standard methods and cannot be easily vaporized or dissolved in common solvents. Glass, bone, dried paint, and archaeological samples are common examples. These materials would now be examined by laser ablation, a technique that produces an aerosol of particulate matter. The laser can be used in its defocused mode for surface profiling or in its focused mode for depth profiling. Interestingly, lasers can be used to vaporize even thermally labile materials through use of the matrix-assisted laser desorption ionization (MALDI) method variant. 

El = electron ionization Cl = chemical ionization ES = electrospray APCI = atmospheric-pressure chemical ionization MALDI = matrix-assisted laser desorption ionization PT = plasma torch (isotope ratios) TI = thermal (surface) ionization (isotope ratios). 

Ionization can be improved in many cases by placing the sample in a matrix formed from sinapic acid, nicotinic acid, or other materials. This variant of laser desorption is known as matrix-assisted laser desorption ionization (MALDI). The vaporized acids transfer protons to sample molecules (M) to produce protonated ions [M + H]+. 

The ablated vapors constitute an aerosol that can be examined using a secondary ionization source. Thus, passing the aerosol into a plasma torch provides an excellent means of ionization, and by such methods isotope patterns or ratios are readily measurable from otherwise intractable materials such as bone or ceramics. If the sample examined is dissolved as a solid solution in a matrix, the rapid expansion of the matrix, often an organic acid, covolatilizes the entrained sample. Proton transfer from the matrix occurs to give protonated molecular ions of the sample. Normally thermally unstable, polar biomolecules such as proteins give good yields of protonated ions. This is the basis of matrix-assisted laser desorption ionization (MALDI). 

The three techniques — laser desorption ionization, laser ablation with secondary ionization, and matrix-assisted laser desorption — are all used for mass spectrometry of a wide variety of substances from rock, ceramics, and bone to proteins, peptides, and oligonucleotides. 

Laser-desorption mass spectrometry (LDMS) or matrix-assisted laser desorption ionization (MALDI) coupled to a time-of-flight analyzer produces protonated or deprotonated molecular ion clusters for peptides and proteins up to masses of several thousand. 

MALDI. matrix-assisted laser desorption ionization... 

Matrix-assisted laser desorption/ionization (MALDI) is widely used for the detection of organic molecules. One of the limitations of the method is a strong matrix background in low-mass (up to 500-700 Da) range. In present work an alternative approach based on the application of rough matrix-less surfaces and known as surface-assisted laser desoi ption/ionization (SALDI), has been applied. 

Electron impact (El), or Efectrospray ionization (ESI), or Matrix-assisted laser desorption ionization (MALDI)... 

Most biochemical analyses by MS use either electrospray ionization (ESI) or matrix-assisted laser desorption ionization (MALD1), typically linked to a time-of-flight (TOF) mass analyzer. Both ESI and MALDl are "soft" ionization methods that produce charged molecules with little fragmentation, even with biological samples of very high molecular weight. 

MALDI (Section 12.4) Matrix-assisted laser desorption ionization a mild method for ionizing a molecule so that fragmentation is minimized during mass spectrometry. 

Matrix-assisted Laser Desorption/ Ionization Mass Spectrometry... 

Matrix-assisted laser desorption mass spectrometry (MALDI-MS) is, after electrospray ionization (ESI), the second most commonly used method for ionization of biomolecules in mass spectrometry. Samples are mixed with a UV-absorbing matrix substance and are air-dried on a metal target. Ionization and desorption of intact molecular ions are performed using a UV laser pulse. 

Peptide mass fingeiprinting (PMF) is a mass spectrometry based method for protein identification. The protein is cleaved by an enzyme with high specificity (trypsin, Lys-C, Asp-N, etc.) or chemical (CNBr). The peptide mixture generated is analyzed by matrix-assisted laser desorp-tion/ionization (MALDI) or electrospray ionization (ESI)... 

Tandem mass spectrometry (MS/MS) is a method for obtaining sequence and structural information by measurement of the mass-to-charge ratios of ionized molecules before and after dissociation reactions within a mass spectrometer which consists essentially of two mass spectrometers in tandem. In the first step, precursor ions are selected for further fragmentation by energy impact and interaction with a collision gas. The generated product ions can be analyzed by a second scan step. MS/MS measurements of peptides can be performed using electrospray or matrix-assisted laser desorption/ionization in combination with triple quadruple, ion trap, quadrupole-TOF (time-of-flight), TOF-TOF or ion cyclotron resonance MS. Tandem... 

Two relatively new techniques, matrix assisted laser desorption ionization-lime of flight mass spectrometry (MALDI-TOF) and electrospray ionization (FS1), offer new possibilities for analysis of polymers with molecular weights in the tens of thousands. PS molecular weights as high as 1.5 million have been determined by MALDI-TOF. Recent reviews on the application of these techniques to synthetic polymers include those by Ilantoif54 and Nielen.555 The methods have been much used to provide evidence for initiation and termination mechanisms in various forms of living and controlled radical polymerization.550 Some examples of the application of MALDI-TOF and ESI in end group determination are provided in Table 3.12. The table is not intended to be a comprehensive survey. 

The molecular weights and molecular weight distributions (MWD) of phenolic oligomers have been evaluated using gel permeation chromatography (GPC),23,24 NMR spectroscopy,25 vapor pressure osmometry (VPO),26 intrinsic viscosity,27 and more recently matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS).28... 

Maleamic acid, cyclization of, 293 Maleic anhydride, 59 Maleimido azine, 307 Manganese diacetate catalysts, 71 Mark-Houwink-Sakurada equation, 57 Material safety data sheets (MSDSs), 246 Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS), 385, 388 McGrath, J. E., 327 MDI isomers, 210 MDIs. See Methylene diphenyl diisocyanates (MDIs)... 

Matrix-assisted laser desorption ionization post-source-decay mass spectrometry... 

Mass spectroscopy is a useful technique for the characterization of dendrimers because it can be used to determine relative molar mass. Also, from the fragmentation pattern, the details of the monomer assembly in the branches can be confirmed. A variety of mass spectroscopic techniques have been used for this, including electron impact, fast atom bombardment and matrix-assisted laser desorption ionization (MALDI) mass spectroscopy. 

---