Polystyrene sulfonation

Water is softened by removing calcium and magnesium ions from hard water in exchange for sodium ions at sites on cation-exchange resin. Water softeners typically use a gel polystyrene sulfonate cation-exchange resin regenerated with a 10% salt brine solution (25). 

Polymeric stmctures having pendent SO groups, lignosulfonates, and polystyrene sulfonates, d... 

In the present work it was studied the dependence of analytical characteristics of the composite SG - polyelectrolyte films obtained by sol-gel technique on the content of non-ionic surfactant in initial sol. Triton X-100 and Tween 20 were examined as surfactants polystyrene sulfonate (PSS), polyvinyl-sulfonic acid (PVSA) or polydimethyl-ammonium chloride (PDMDA) were used as polyelectrolytes. The final films were applied as modificators of glass slides and pyrolytic graphite (PG) electrode surfaces. 

Rexyn 101 (polystyrene sulfonic acid), 80-91% yield.This method does not cleave the r-butyldimethylsilyl ether. 

Polymer supported reagents, catalysts, protecting groups, and mediators can be used in place of the corresponding small molecule materials (Sherrington, 1991 Sundell and Nasman, 1993). The reactive species is tightly bound to a macromolecular support which immobilizes it. This generally makes toxic, noxious, or corrosive materials much safer. The use of polystyrene sulfonic acid catalyst for the manufacture of methyl r-butyl... 

Anionic hydrophobic Polystyrene sulfonate (Na) Lignin, sulfonated 80/20 0.1 M NaNOj/CH,CN... 

Anionic hydrophobic Sodium polystyrene sulfonate 0.1-0.3 M salt/buffer, pH 7-9 with 20% methanol... 

The GBR resin works well for nonionic and certain ionic polymers such as various native and derivatized starches, including sodium carboxymethylcel-lulose, methylcellulose, dextrans, carrageenans, hydroxypropyl methylcellu-lose, cellulose sulfate, and pullulans. GBR columns can be used in virtually any solvent or mixture of solvents from hexane to 1 M NaOH as long as they are miscible. Using sulfonated PDVB gels, mixtures of methanol and 0.1 M Na acetate will run many polar ionic-type polymers such as poly-2-acrylamido-2-methyl-l-propanesulfonic acid, polystyrene sulfonic acids, and poly aniline/ polystyrene sulfonic acid. Sulfonated columns can also be used with water glacial acetic acid mixtures, typically 90/10 (v/v). Polyacrylic acids run well on sulfonated gels in 0.2 M NaAc, pH 7.75. 

Commercial narrow standards [such as poly(ethylene glycol) (pEG), polystyrene sulfonate, pAA, poly w-vinyl pyrrolidinone, dextrans] are available from American Polymer Standards Corporation, Polymer Laboratories, Polymer Standards Service USA, Toyo Soda, and others. While these standards are often not as narrow as pSty or pMMA that has been anionically polymerized, they are acceptable for narrow standard calibrations. 

From an analysis of data for polypyrrole, Albery and Mount concluded that the high-frequency semicircle was indeed due to the electron-transfer resistance.203 We have confirmed this using a polystyrene sulfonate-doped polypyrrole with known ion and electron-transport resistances.145 The charge-transfer resistance was found to decrease exponentially with increasing potential, in parallel with the decreasing electronic resistance. The slope of 60 mV/decade indicates a Nemstian response at low doping levels. 

Serizawa and Akashi [95] analyzed the monolayer adsorption of polystyrene latex particles with cationic polyvinylamine grafted on their surface, while Serizawa et al. [96,97] used commercial anionic latex particles. Both types of particles were adsorbed on polyelectrolyte-coated substrates previously prepared by alternating adsorption of cationic and anionic polyelectrolytes such as polyallylamine hydrochloride (PAH) and polystyrene sulfonate sodium salt (PSS) according to the method described by Decher [164]. Using... 

Fe(6-Mepy)2(py)tren] (004)2 Doped in PSS. Magnetic susceptibilities measured for a microcrystalline sample of the complex produce a magnetic moment value = 0.36 pg at 10 K and 0.61 pg at 150 K, followed by a gradual increase to Peff = 2.80 pe at 311 K [138]. Thus 26% of the complexes are in the HS state at 300 K if a magnetic moment of 5.1 Pe is assumed for the pure HS compound. On the other hand, the complex doped into a polystyrene sulfonate (PSS) film does not provide any evidence for a thermal population of the HS state up to 340 K as demonstrated by variable-temperature UV-VIS and Mossbauer spectra. In fact, all the complexes doped into the PSS film are in the LS state at temperatures below 340 K. However, if irradiated by a single pulse of a Q-switched Nd/YAG laser (532 mp), the complex is excited from the LS ground state to the HS J2 states via an intermediate MLCT state and the metal states. The subsequent back relaxation from the excited T2 state to the... 

The polyamines putrescine, cadaverine, spermidine, and spermine, which are seen at elevated levels in some victims of cancer, were separated on a Technicon (The Technicon Company Chauncey, NY) TSM Amino Acid Analyzer packed with an 8% divinylbenzene-co-polystyrene sulfonated resin with post-column ninhydrin detection.111 Amines such as ethanolamine, noradrenaline, hexamethylene diamine, methoxytryptamine, spermine, and spermidine were separated from amino acids on a DC-4A cation exchange resin.112 A similar approach, using a Beckman Model 121M amino acid analyzer equipped with an AA-20 column, was also successful.113 A Polyamin-pak strong cation exchange column (JASCO) was eluted with a citrate buffer for the detection of putrescene, spermine, cadaverine, and 1,5-diaminohex-ane from rat thymus.114 A post-column o-phthaldehyde detection system was used. 

Sodium polystyrene sulfonate 15-60 g in 20% sorbitol suspension enterally. As an enema, prepare 50 g in 70% sorbitol plus 100 mL tap water. This solution should be retained for 30-60 min... 

Treatment depends on degree of hyperkalemia and presence/severity of signs and symptoms (sometimes irrespective of actual serum potassium level). Mild 5.5-6 mEq/L—furosemide and sodium polystyrene sulfonate. Moderate 6.1-7 mEq/L—insulin, glucose, sodium bicarbonate,... 

Sodium polystyrene sulfonate (SPS, 15 to 30 g orally), a sodium-potassium exchange resin, promotes potassium excretion from the GI tract. The onset of action is within 2 hours... 

It is critically important to recognize that the treatments of hyperkalemia discussed thus far are transient, temporizing measures. They are intended to provide time to institute definitive therapy aimed at removing excess potassium from the body. Agents that increase potassium excretion from the body include sodium polystyrene sulfonate, loop diuretics, and hemodialysis or hemofiltration (used only in patients with renal failure). Sodium polystyrene sulfonate (Kayexalate , various manufacturers) can be given orally, via NG tube, or as a rectal retention enema and is dosed at 15 to 60 grams in four divided doses per day. 

CE has been used for the analysis of anionic surfactants [946,947] and can be considered as complementary to HPLC for the analysis of cationic surfactants with advantages of minimal solvent consumption, higher efficiency, easy cleaning and inexpensive replacement of columns and the ability of fast method development by changing the electrolyte composition. Also the separation of polystyrene sulfonates with polymeric additives by CE has been reported [948]. Moreover, CE has also been used for the analysis of polymeric water treatment additives, such as acrylic acid copolymer flocculants, phosphonates, low-MW acids and inorganic anions. The technique provides for analyst time-savings and has lower detection limits and improved quantification for determination of anionic polymers, compared to HPLC. 

Stabilizing agents are used to maintain drilling fluid rheological properties at highly elevated downhole temperatures. Chromium and chromium-free lignosulfonates, polyglycol ethers, sodium polystyrene sulfonate-co-maleic anhydride), and a melanin polymer have been used in this application. Additives such as sodium diethyldi-thiocarbamate have been used to stabilize aqueous polysaccharides such as xanthan gum (18). 

A nice example for the utilization of scaling laws in sedimentation velocity runs with the analytical ultracentrifuge has been published by Machtle and Borger [78]. For the polyelectrolyte sodium polystyrene sulfonate (NaPSS) in 0.5 molar NaCl solution they found a scaling law for the sedimentation coefficient at... 

Several strategies to immobilize the p-oxo catalysts on an electrode surface or in a membrane have been employed. However, no available data about their efficiency as modified electrodes for water oxidation have been given.482-486 It should be noted that [ (bpy)2RuIII(OH2) 2(M C))]4+ is also an excellent electrocatalyst for oxidation of chloride to chlorine (better than for the oxidation of H20 into 02) at 1.20 V vs. SCE in 0.05 M HC1 solution,487 or at a modified electrode prepared by incorporation of the complex by ion-exchange into polystyrene sulfonate or Nafion films.482,4 8... 

C.C. Wang, H. Wang, Z.Y. Wu, G.L. Shen, and R.Q. Yu, A piezoelectric immunoassay based on self-assembled monolayers of cystamine and polystyrene sulfonate for determination of Schistosoma japoni-cum antibodies. Anal. Bioanal. Chem. 373, 803-809 (2002). 

---