Polystyrene modified sulfonated resins

More recently, Biswas and Chatteijee have prepared polystyrene electro-philically substituted with phthalic anhydride pyromellitic diianhydride tri-mellitic anhydride and 1,2,3,4-tetrahydrophthalic anhydride by Friedel-Crafts reaction. These anhydride-modified polystyrenes have further been converted into sulfonic acid resins by conventional sulfonation reaction. The thermal stabilities of these modified polymers are comparatively better than that of unmodified polystyrene. Ion-exchange capacities also compare favourably with the polystyrene-based commercial resins. 

Electrical conductivity measurements have been reported on a wide range of polymers including carbon nanofibre reinforced HOPE [52], carbon black filled LDPE-ethylene methyl acrylate composites [28], carbon black filled HDPE [53], carbon black reinforced PP [27], talc filled PP [54], copper particle modified epoxy resins [55], epoxy and epoxy-haematite nanorod composites [56], polyvinyl pyrrolidone (PVP) and polyvinyl alcohol (PVA) blends [57], polyacrylonitrile based carbon fibre/PC composites [58], PC/MnCli composite films [59], titanocene polyester derivatives of terephthalic acid [60], lithium trifluoromethane sulfonamide doped PS-block-polyethylene oxide (PEO) copolymers [61], boron containing PVA derived ceramic organic semiconductors [62], sodium lanthanum tetrafluoride complexed with PEO [63], PC, acrylonitrile butadiene [64], blends of polyethylene dioxythiophene/ polystyrene sulfonate, PVC and PEO [65], EVA copolymer/carbon fibre conductive composites [66], carbon nanofibre modified thermotropic liquid crystalline polymers [67], PPY [68], PPY/PP/montmorillonite composites [69], carbon fibre reinforced PDMS-PPY composites [29], PANI [70], epoxy resin/PANI dodecylbenzene sulfonic acid blends [71], PANI/PA 6,6 composites [72], carbon fibre EVA composites [66], HDPE carbon fibre nanocomposites [52] and PPS [73]. 

For the SPE of the more polar aromatic sulfonates, IPs with tetralkylammonium are previously formed [85,93,94]. The combination of the formation of IP with cetyltrimethylammonium and SPE is efficacious in the extraction of benzene and naphthalene sulfonates from an aqueous environment. Good recoveries are also obtained with octylammonium acetate as the IP agent, both when it is added to the aqueous sample prior to the extraction and when it saturates the solid phase to produce an anion-exchange column [95,96]. An alternative approach is based on the use of deactivated charcoal (Carbonpack B) [96] or of chemically modified polystyrene-divinylbenzene resins [85]. Often graphitized carbon black (GCB) is used for the clean-up process of the sample [96]. 

Figu re 10.4 Modified conventional sulfonated polystyrene resins. 

Alkali and acid treatments have also been used to modify surface properties of polymers sulfonated polyethylene films treated first with ethylenediamine and then with a terpolymer of vinyhdene chloride, acrylonitrile, and acrylic acid exhibited better clarity and scuff resistance and reduced permeabihty. Permanently amber-colored polyethylene containers suitable for storing light-sensitive compoimds have been produced by treating fluorosulfonated polyethylene with alkali. Poly(ethylene terephthalate) dipped into trichloroacetic/chromic acid mixture has improved adhesion to polyethylene and nylons. Antifogging lenses have been prepared by exposing polystyrene films to sulfonating conditions. Acid and alkali surface treatments have also been used to produce desired properties in polymethylmethacrylates, polyacrylonitrile, styrene-butadiene resins, polyisobutylene, and natural rubber. Surface halogenation of the diene polymers natural rubber and polyisobutylene resulted in increased adhesion to polar surfaces. 

Figure 1 Polymer interpretation chart. PAI, polyamideimide PC, polycarbonate UP, unsaturated polyester PDAP, diarylate phtalate resin VC-VAc, vinyl chloride-vinyl acetate copolymer PVAc, polyvinyl acetate PVFM, polyvinyl formal PUR, polyurethane PA, polyamide PMA, methacrylate ester polymer EVA, ethylene-vinyl acetate copolymer PF, phenol resin EP, epoxide resin PS, polystyrene ABS, acrylonitrile-butadiene-styrene copolymer PPO, polyphenylene oxide P-SULFONE, poly-sulfone PA, polyamide UF, urea resin CN, nitrocellulose PVA, polyvinyl acetate MC, methyl cellulose MF, melamine resin PAN, polyacrylonitrile PVC, polyvinyl chloride PVF, polyvinyl fluoride CR, polychloroprene CHR, polyepichlorohydrin SI, polymethylsiloxane POM, polyoxy-methylene PTFE, polytetrafluoroethylene MOD-PP, modified PP EPT, ethylene-propylene terpolymer EPR, ethylene-propylene rubber PI, polyisoprene BR, butyl rubber PMP, poly(4-methyl pentene-1) PE, poly(ethylene) PB, poly(butene-l). (Adapted from Ref. 22, p. 50.)...

Electrical properties have been reported on numerous carbon fiber-reinforced polymers, including carbon nanoflber-modified thermotropic liquid crystalline polymers [53], low-density polyethylene [54], ethylene vinyl acetate [55], wire coating varnishes [56], polydimethyl siloxane polypyrrole composites [50], polyacrylonitrile [59], polycarbonate [58], polyacrylonitrile-polycarbonate composites [58], modified chrome polymers [59], lithium trifluoromethane sulfonamide-doped polystyrene-block copolymer [60], boron-containing polyvinyl alcohols [71], lanthanum tetrafluoride complexed ethylene oxide [151, 72, 73], polycarbonate-acrylonitrile diene [44], polyethylene deoxythiophe-nel, blends of polystyrene sulfonate, polyvinyl chloride and polyethylene oxide [43], poly-pyrrole [61], polypyrrole-polypropylene-montmorillonite composites [62], polydimethyl siloxane-polypyrrole composites [63], polyaniline [46], epoxy resin-polyaniline dodecyl benzene sulfonic acid blends [64], and polyaniline-polyamide 6 composites [49]. 

---