Sulfonated polystyrene sulfonic acid

Softening Cation Polystyrene matrix Sulfonic acid functional groups Nad... 

In the present work it was studied the dependence of analytical characteristics of the composite SG - polyelectrolyte films obtained by sol-gel technique on the content of non-ionic surfactant in initial sol. Triton X-100 and Tween 20 were examined as surfactants polystyrene sulfonate (PSS), polyvinyl-sulfonic acid (PVSA) or polydimethyl-ammonium chloride (PDMDA) were used as polyelectrolytes. The final films were applied as modificators of glass slides and pyrolytic graphite (PG) electrode surfaces. 

Rexyn 101 (polystyrene sulfonic acid), 80-91% yield.This method does not cleave the r-butyldimethylsilyl ether. 

Polymer supported reagents, catalysts, protecting groups, and mediators can be used in place of the corresponding small molecule materials (Sherrington, 1991 Sundell and Nasman, 1993). The reactive species is tightly bound to a macromolecular support which immobilizes it. This generally makes toxic, noxious, or corrosive materials much safer. The use of polystyrene sulfonic acid catalyst for the manufacture of methyl r-butyl... 

The GBR resin works well for nonionic and certain ionic polymers such as various native and derivatized starches, including sodium carboxymethylcel-lulose, methylcellulose, dextrans, carrageenans, hydroxypropyl methylcellu-lose, cellulose sulfate, and pullulans. GBR columns can be used in virtually any solvent or mixture of solvents from hexane to 1 M NaOH as long as they are miscible. Using sulfonated PDVB gels, mixtures of methanol and 0.1 M Na acetate will run many polar ionic-type polymers such as poly-2-acrylamido-2-methyl-l-propanesulfonic acid, polystyrene sulfonic acids, and poly aniline/ polystyrene sulfonic acid. Sulfonated columns can also be used with water glacial acetic acid mixtures, typically 90/10 (v/v). Polyacrylic acids run well on sulfonated gels in 0.2 M NaAc, pH 7.75. 

Pt-catalyzed hydration of various aliphatic and aromatic alkynes under phase transfer conditions in (CH2C1)2/H20 in the presence of Aliquat 336 led to either a Markovnikov product, mixtures of two ketones, or ketones with the carbonyl group positioned away from the bulky side.72 In the absence of the phase transfer reagent, Aliquat 336, hardly any reaction took place. Recently, a hydrophobic, low-loading and alkylated polystyrene-supported sulfonic acid (LL-ALPS-SO3H) has also been developed for the hydration of terminal alkynes in pure water, leading to ketones as the product.73 Under microwave irradiation, the hydration of terminal arylalkynes was reported to proceed in superheated water (200°C) without any catalysts.74... 

Polystyrene Sulfonic Acid (Sodium), 70 kDa 1.0-5.0 Polysciences, Warrington, PA... 

Polymer Media Polymaleic Anhydride Poly Acrylic Acid Polyvinyl Phosphonic Acid Polyvinyl Sulfonic Acid Polystyrene Sulfonate Tripoly Phosphate... 

MP borohydride catches one equivalent of the titanium catalyst, while the polystyrene-bound diethanolamine resin (PS-DEAM) can scavenge the remaining titanium catalyst. The borohydride reagent also assists in the reductive animation reaction. Final purification of the crude amine product is achieved with a polystyrene-bound toluene sulfonic acid resin scavenger that holds the amine through an ion exchange reaction, while impurities are washed off. The pure amine can be recovered with methanol containing 2M ammonium hydroxide. 

Polystyrenes, preparation and molecular weights of, 23 285-288 Polysulfone, 41 167-168 Poly sulfonic acids, 20 349-351 Polythyleneimine... 

Proton conductivity as a function of lEC for ETFE-g-PSSA = polyethylenetetrafluoroethylene-gra/t-polystyrene sulfonic acid, BAM membrane = substituted poly(trifluorostyrene) sulfonic acid, SPEEK = sulfonated poly(ether ether ketone) and Nafion. (From Peckham, T. J. et al. 2007. Journal of Materials Chemistry 17 3255-3268, and Dolye, M. et al. 2001. Journal of Physical Chemistry B 105 9387-9394.)... 

In a study aimed at the identification of products of free radical reactions with polystyrene- and aromatic-based PEMs using model compounds, Hiibner and Roduner observed the addition of free radicals to the aromatic rings, preferentially in the ortho position to alkyl- and RO-substituents (in polystyrene- and aromatic-based PEMs, the para position is blocked by the presence of the sulfonic acid group). This study demonstrated the combined ortho-activation by these substituents and the meta-directing effect... 

Another concern for polystyrene- and some aromatic-based PEMs is hydrolysis of fhe sulfonic acid group from aromatic rings as well as hydrolytic cleavage of polymer backbone under fuel cell conditions for aromafic polymers including polyimides, poly(arylene ethers), poly(ether ketones), and poly(ether sulfones). It is well known that the sulfonation of aromafic rings is a reversible process especially at low pH and at elevated temperature (Scheme 3.3). The reversibility of sulfonation, for example, is used in fhe preparafion of trinitrotoluene or picric acid. Por the simplest membrane of the class of arylsulfonic acids (i.e., benzenesulfonic acid), fhe reacfion occurs upon freatment with a stream of superheated steam at 180°C.i ... 

Yu, J., Yi, B., Xing, D., Liu, R, Shao, Z. and Fu, Y. 2003. Degradation mechanism of polystyrene sulfonic acid membrane and application of its composite membranes in fuel cells. Physical Chemistry Chemical Physics 5 611-615. 

Particulates consisting of porous, particulate ion exchange resins with various paramagnetic ions (Cu, Fe " , Fe " , Mn " ", and Gd " ") bound to their surface were investigated by Braybrook et al. (93,94). The resins used were sulfonated polystyrene, iminodiacetic acid substituted polystyrene and sepharose activated with l,4-bis(2,3-epoxypropoxy) butane and substituted with iminodiacetic acid. 

The axial immobilization of chiral [Mn((S,S)-salen )j (where salen = (Si,Sj-NiN -bis(3,5-diR -salicylidene)-l,2-diRbethane-diamine R = Bu, R -R = -(CH2)4- R = Bu, R = Ph R = Pn, R R = -(CH2)4-) complexes was achieved by reaction of [Mn(salen )Cl] with sulfonic acid- or phenol-substituted crosslinked and insoluble polystyrene resins [45]. The resulting polymer-immobilized [Mn(salen )j complexes were active and enantioselective for the asymmetric epoxidation of... 

An improved high pressure liquid chromatographic (HPLC) procedure Tor the PSP toxins is described. The method involves separation of the toxins on a polystyrene divinylbenzene resin colunn (Hamilton, PRP-1) in the reversed phase mode using heptane and hexane sulfonic acids as ion-pairing reagents. Detection of the toxins is by fluorescence following post-column alkaline periodate oxidation. The sensitivity of the HPLC method is better than the standard mouse bioassay by at least a factor of four for each of the individual toxins. 

Aromatic electrophilic substitution is used commercially to produce styrene polymers with ion-exchange properties by the incorporation of sulfonic acid or quaternary ammonium groups [Brydson, 1999 Lucas et al., 1980 Miller et al., 1963]. Crosslinked styrene-divinyl-benzene copolymers are used as the starting polymer to obtain insoluble final products, usually in the form of beads and also membranes. The use of polystyrene itself would yield soluble ion-exchange products. An anion-exchange product is obtained by chloromethylation followed by reaction with a tertiary amine (Eq. 9-38) while sulfonation yields a cation-exchange product (Eq. 9-39) ... 

The basis of the separation of amino acids by AAA lies in the interaction between acids - present in the elution buffer - and the stationary phase. This resin is made up of small sulfonated polystyrene particles. The negative charge of the sulfonic acid residues is counterbalanced by the Li+ -cations of the elution buffer. As the whole separation process takes place at a weakly acidic pH, the carboxylic acid residues are protonated and the interaction with the stationary phase of the column is achieved by the protonated (and thus positively charged) amino group(s) of the amino acids. The more basic the amino acid is, the stronger the interaction with the stationary phase and - consequently - the longer the retention time. So it is easily understood... 

Polystyrene o — Dinonyl phthalate ° — Sulfonic acid ester o — Trieresyl phosphate o — Hexachlorodiphenyl... 

Only a few examples of solid-phase syntheses of phosphonic, phosphoric, and sulfonic acids have been reported (Figure 3.16). Benzyl esters of these strong acids can act as alkylating agents, and may therefore be too labile to serve as linkers for long synthetic sequences on solid phase. However, if cross-linked polystyrene is used as the support, the reactivity of, for example, benzyl sulfonates is strongly reduced, and even... 

Alternatively, sulfonamides can also be prepared by oxidation of sulfinamides with periodate (Entry 3, Table 8.8) or with MCPBA [125]. Polystyrene-bound sulfonyl chlorides, which can be prepared from polystyrene-bound sulfonic acids by treatment with PCI5, SOCI2 [126-129], CISO3H [130], or SO2CI2/PPI13 [131], react smoothly with amines to yield the corresponding sulfonamides (Entry 4, Table 8.8). Support-bound carbamates of primary aliphatic or aromatic amines can be N-sulfonylated in the presence of strong bases, and can therefore be used as backbone amide linkers for sulfonamides (Entries 5 and 6, Table 8.8). 

Deuterium-decoupled deuterated amino adds bound to crosslinked polystyrene with sulfonic acid groups show line widths 3 to 4 times narrower than those from... 

---