Polymers alkyd resins

Except when nondrying alkyds are used strictly as plasticizers for other thermoplastic polymers, alkyd resins do not remain as a thermoplastic material in their ultimate application. The film integrity is largely derived after the resin molecules have been cross-linked, either through the unsaturation functionalities on their fatty... 

Thermo set polymers Alkyd resins Amino resins Epoxy resins Phenolic resins Poly(bis maleimide) Polyesters, unsaturated Thermoset resin Tohprene TOR Torelina Torlon TP 301 TPX... 

The great variety of properties is obtained by the use of different substituting groups in the siloxane synthesis, variation of the molecular weight, the extent of copolymerization with other polymers (alkyd resins, polyesters), and the addition of additives, pigments, fillers. 

Used as fibres, particularly in textiles and film. Many other polyester polymers are of importance, e.g. unsaturated polyester resins from phthalic anhydride, propylene glycol and maleic anhydride used with reinforcement in boats, cars, etc. (alkyd resins). U.S. production 1983 1-7 megatonnes. 

Polyesters from polybasic acids and polyhydric alcohols. Alkyd resins. The condensation of polyhydric alcohols and polybasic acids or anhydrides leads to polj esters known as alkyd resins. The most common member of the group is a glycerol - phthahc acid polymer, and this has led to the term glyptal resins being frequently apphed to the whole group. 

The properties of the polymers may be modified by mixing abphatic acids or anhydrides with the phthalic anhydride. Many alkyd resins find application in the paint industry. 

Uses. Neopentyl glycol is used extensively as a chemical intermediate in the manufacture of polyester resins (see Alkyd resins), polyurethane polyols (see Urethane polymers), synthetic lubricants, polymeric plasticizers (qv), and other polymers. It imparts a combination of desirable properties to properly formulated esterification products, including low color, good weathering and chemical resistance, and improved thermal and hydrolytic stabiUty. 

Alkyd resins are produced by reaction of a polybasic acid, such as phthaUc or maleic anhydride, with a polyhydric alcohol, such as glycerol, pentaerythritol, or glycol, in the presence of an oil or fatty acid. The resulting polymeric material can be further modified with other polymers and chemicals such as acryhcs, siUcones, and natural oils. On account of the broad selection of various polybasic acids, polyhydric alcohols, oils and fatty acids, and other modifying ingredients, many different types of alkyd resins can be produced that have a wide range of coating properties (see Alkyd resins). 

Uses. Phthabc anhydride is used mainly in plasticizers, unsaturated polyesters, and alkyd resins (qv). PhthaUc plasticizers consume 54% of the phthahc anhydride in the United States (33). The plasticizers (qv) are used mainly with poly(vinyl chloride) to produce flexible sheet such as wallpaper and upholstery fabric from normally rigid polymers. The plasticizers are of two types diesters of the same monohydric alcohol such as dibutyl phthalate, or mixed esters of two monohydric alcohols. The largest-volume plasticizer is di(2-ethylhexyl) phthalate [117-81-7] which is known commercially as dioctyl phthalate (DOP) and is the base to which other plasticizers are compared. The important phthahc acid esters and thek physical properties are Hsted in Table 12. The demand for phthahc acid in plasticizers is naturally tied to the growth of the flexible poly(vinyl chloride) market which is large and has been growing steadily. 

Synthetic Applications. Oxazolines, which ate synthesized as indicated above, have been utilized in many different appHcations (25). When used in resin formulations, AMP, AEPD, and TRIS AMINO can incorporate the oxazoline stmeture into the polymer stmeture (26). Because they ate polyols, both AEPD and TRIS AMINO can be used in polyester resin modification. Oxazoline alkyd films ate characterized by improved performance, particularly salt-spray resistance and gloss (see Alkyd resins Coatings, special purpose, high performance). 

Modification of Alkyd Resins by Blending with Other Polymers... 

One of the important attributes of alkyds is their good compatibiUty with a wide variety of other coating polymers. This good compatibiUty comes from the relatively low molecular weight of the alkyds, and the fact that the resin stmcture contains, on the one hand, a relatively polar and aromatic backbone, and, on the other hand, many aUphatic side chains with low polarity. An alkyd resin in a blend with another coating polymer may serve as a modifier for the other film-former, or it may be the principal film-former and the other polymer may serve as the modifier for the alkyd to enhance certain properties. Examples of compatible blends foUow. 

Paint Driers and Polymer Additives. Paints based on alkyd resins (qv) dry by the oxidation and cross-linking of unsaturated side chains. Metal catalysts are included in paint formulations to promote this drying. Cerium carboxylates, eg, the naphthenate, are used as through driers, ie, to promote drying in the body of the paint film rather than at the film s surface (44). 

Modified alkyd resins In this group one finds styrenated alkyds, vinyl toluenated alkyds, oil-modified vinyl resins, acrylic alkyds, silicone alkyds and polyurethane alkyds. The modifying component usually has a number of effects. It always increases the molecular weight of the alkyd polymer, and may impart hardness, durability, or chemical resistance. It also affects the solubility of the polymer in solvents. 

Modification of alkyd resins with high proportions of silicones considerably reduces rates of attack, but the most spectacular extension of life is shown by fluorinated polymers such as polyvinylidene fluoride where erosion rates can be reduced to 0 -1 /tm/year. If this level of durability can be achieved an initial coating, if firmly adherent and free from any breaks, may often be expected to maintain protection over a metal substrate for the likely life of the structure. The considerably increased first cost, as compared with more conventional coatings, has to be balanced against the probable saving in maintenance costs or consequences of failure. 

Another commercially important crosslinking process that involves unsaturated polymer precursors is the so-called drying of alkyd resins in paints. This process is not drying at all, at least not in the sense of mere loss of solvent to leave behind a solid residue. Instead, the main process is the conversion of high relative molar mass molecules to a crosslinked structure via... 

These are the most important components of paint. Coatings can be either clear or opaque (containing pigments) and either solvent- or water-based. With solvent-based paints, after application, most of the solvent is lost through evaporation. These solvent-based coatings are mostly alkyds (name derived from alkyl/acid) or modified alkyd resins. Normally they contain 30% polymer solids higher solids content is limited by the increasing viscosity of the system. 

Decreasing the viscosity of the currently applied synthetic alkyd resins reduces the amount of organic solvent that is needed in these paints for optimal performance. This could either be accomplished by decreasing the molecular weight of the applied alkyd resin, or by using polymers having a narrower... 

In addition to natural materials, synthetic polymers might also be present in works of art. Since the end of the nineteenth century, synthetic polymers have been produced and used in the field of cultural heritage, to restore works of art [3], but also as paint binders, such as alkyd resins and acrylic water dispersions. Most synthetic polymers can be detected by GC/MS only through thermal degradation followed by GC/MS [4,5] (Chapter 12 deals with the characterisation of synthetic resins in detail). 

Marine coatings Organic coatings for corrosion control Paint acrylic ester polymers, 7 388-389 adhesion, 7 90-92 advanced ceramic, 7 704-705 alkanolamines from olefin oxides and ammonia, 2 136 alkyd resins, 2.T67-168 amino acid resin applications, 2 635—637 anticorrosion, 25 134 anticorrosion metallic, 7 713-714... 

Several applications of hyperbranched polymers as precursors for synthesis of crosslinked materials have been reported [91-97] but systematic studies of crosslinking kinetics, gelation, network formation and network properties are still missing. These studies include application of hyperbranched aliphatic polyesters as hydroxy group containing precursors in alkyd resins by which the hardness of alkyd films was improved [94], Several studies involved the modification of hyperbranched polyesters to introduce polymerizable unsaturated C=C double bonds (maleate or acrylic groups). A crosslinked network was formed by free-radical homopolymerization or copolymerization. 

The dilution properties of hyperbranched polymers also differ from those of linear polymers. In a comparison between two alkyd resin systems, where one was a conventional high solid alkyd and the other based on a hyperbranched aliphatic polyester, the conventional high solid alkyd was seen to exhibit a higher viscosity [113]. A more rapid decrease in viscosity with solvent content was noted for the hyperbranched alkyd when the polymers were diluted. 

Together, antifreeze, PET, and polyester polymers account for about 98% of the ethylene glycol produced in the United States. It is also used sometimes as a deicer for aircraft surfaces. The two hydroxyl groups in the EG molecule also make EG suitable for the manufacture of surfactants and in latex paints. Other applications include hydraulic brake fluid, the manufacture of alkyd resins for surface coatings, and stabilizers for water dispersions of urea-formaldehyde and melamine-formaldehyde The hygroscopic properties (absorbs moisture from the air) make EG useful as a humectant for textile fibers, paper, leather, and adhesives treatment. 

---