Backbone, aromatic

Fig. 9 Enzymatic mechanism involved in the formation of estrogens. A The sulfatase pathway. B,C Structure of the potent STS inhibitors EMATE and COUMATE. D New pharmacophore for the inhibition of estrone sulfatase R general carbon backbone (aromatic or aliphatic), X electron withdrawing groups (e.g. nitro), Y additional functionality including fused or adjacent/remote ring structures so as to meet the log requirement...

Aromatic polyimides are the first example we shall consider of polymers with a rather high degree of backbone ring character. This polymer is exemplified by the condensation product of pyromellitic dianhydride [Vll] and p-amino-aniline [Vlll] ... 

Steric Factors. Initially, most of the coUisions of fluorine molecules with saturated or aromatic hydrocarbons occur at a hydrogen site or at a TT-bond (unsaturated) site. When coUision occurs at the TT-bond, the double bond disappears but the single bond remains because the energy released in initiation (eq. 4) is insufficient to fracture the carbon—carbon single bond. Once carbon—fluorine bonds have begun to form on the carbon skeleton of either an unsaturated or alkane system, the carbon skeleton is somewhat stericaUy protected by the sheath of fluorine atoms. Figure 2, which shows the crowded hehcal arrangement of fluorine around the carbon backbone of polytetrafluoroethylene (PTFE), is an example of an extreme case of steric protection of carbon—carbon bonds (29). 

Numerous diamines and aromatic dianhydrides have been investigated. WhoUy aromatic Pis have been stmctiirally modified by incorporating various functional groups, such as ether, carbonyl, sulfide, sulfone, methylene, isopropjlidene, perfluoroisopropyUdene, bipyridyls, sdoxane, methyl phosphine oxide, or various combinations of these, into the polymer backbone to achieve improved properties. The chemistry and apphcations of Pis have been described in several review articles (4). 

Aromatic copoly(amide—imide)s with Atriazine rings in the repeating unit of the backbone are also possible from a diacyl chloride reacting with preformed imide groups and diamines containing Atriazine rings (15). 

Research activities in the area of PODs containing aromatic groups have been centered around the production of highly processible, soluble, and thermally stable polymers. In this particular class of PODs, the imide-and phenylene-containing backbones have been widely explored. 

Polyquinoxalines (PQ) have proven to be one of the better heat-resistant polymers with regard to both stabiUty and potential appHcation. The aromatic backbones are derived from the condensation of a tetramine with a bis-glyoxal, reactions first done in 1964 (61,62). In 1967, a soluble, phenylated version of this polymer was produced (63). The chemistry and technology of polyquinoxalines has been reviewed (64). 

A polyester backbone with two HFIP groups (12F aromatic polyester of 12F-APE) was derived by the polycondensation of the diacid chloride of 6FDCA with bisphenol AF or bisphenol A under phase-transfer conditions (120). These polymers show complete solubkity in THF, chloroform, ben2ene, DMAC, DMF, and NMP, and form clear, colorless, tough films the inherent viscosity in chloroform at 25°C is 0.8 dL/g. A thermal stabkity of 501°C (10% weight loss in N2) was observed. 

The birefringence for phenyl-substituted PC (4) (T = 176 C) is reduced to about 50%, for benzyl substituted PC (5) (T = 138 C) to about 25%, and for four-ring bisphenol PC (6) to 8% of the value for BPA-PC (183,190,195,197,198) on condition of an optimum conformation of the phenyls in the side groups perpendicular to the aromatic rings in the backbone. In reaUty, however, these low birefringence values are not achieved, because the optimum conformation of the phenyl rings cannot be achieved in injection-stamped disks. 

Blends ofiPetramethylbisphenolA-PC (TMBPA-PC) with ModfiedPS or Styrene-Ac7ylonitrile(SAN) Copolymer. By installing halogen atoms on the aromatic rings of the PC-backbone, not only the resistance to heat softening can be increased (eg, TMBPA-PC = 203° C) (209), but also the compatibiUty with olefins. 

Benzene, toluene, and xylene are made mosdy from catalytic reforming of naphthas with units similar to those already discussed. As a gross mixture, these aromatics are the backbone of gasoline blending for high octane numbers. However, there are many chemicals derived from these same aromatics thus many aromatic petrochemicals have their beginning by selective extraction from naphtha or gas—oil reformate. Benzene and cyclohexane are responsible for products such as nylon and polyester fibers, polystyrene, epoxy resins (qv), phenolic resins (qv), and polyurethanes (see Fibers Styrene plastics Urethane POLYiffiRs). 

One class of aromatic polyethers consists of polymers with only aromatic rings and ether linkages ia the backbone poly(phenylene oxide)s are examples and are the principal emphasis of this article. A second type contains a wide variety of other functional groups ia the backbone, ia addition to the aromatic units and ether linkages. Many of these polymers are covered ia other articles, based on the other fiinctionahty (see Polymers containing sulfur, POLYSULFONES). 

The aromatic sulfone polymers are a group of high performance plastics, many of which have relatively closely related stmctures and similar properties (see Polymers containing sulfur, polysulfones). Chemically, all are polyethersulfones, ie, they have both aryl ether (ArOAr) and aryl sulfone (ArS02Ar) linkages in the polymer backbone. The simplest polyethersulfone (5) consists of aromatic rings linked alternately by ether and sulfone groups. 

I itro-DisplacementPolymerization. The facile nucleophilic displacement of a nitro group on a phthalimide by an oxyanion has been used to prepare polyetherimides by heating bisphenoxides with bisnitrophthalimides (91). For example with 4,4 -dinitro monomers, a polymer with the Ultem backbone is prepared as follows (92). Because of the high reactivity of the nitro phthalimides, the polymerkation can be carried out at temperatures below 75°C. Relative reactivities are nitro compounds over halogens, Ai-aryl imides over A/-alkyl imides, and 3-substituents over 4-substituents. Solvents are usually dipolar aprotic Hquids such as dimethyl sulfoxide, and sometimes an aromatic Hquid is used, in addition. 

A polysulfone is characterized by the presence of the sulfone group as part of its repeating unit. Polysulfones may be aUphatic or aromatic. AUphatic polysulfones (R and are alkyl groups) were synthesized by radical-induced copolymerization of olefins and sulfur dioxide and characterized many years ago. However, they never demonstrated significant practical utiUty due to their relatively unattractive physical properties, not withstanding the low cost of their raw materials (1,2). The polysulfones discussed in this article are those based on an aromatic backbone stmcture. The term polysulfones is used almost exclusively to denote aromatic polysulfones. 

An elegant synthesis method which is specific to sulfone polymers containing phenyl—phenyl linkages (such as PPSF) is the nickel-catalysed coupling of aryl dihahdes. The scheme for this synthesis involves a two-step process. First, an aromatic dihaUde intermediate is formed which carries the backbone features of the desired polymer. This aromatic dihahde intermediate is then self-coupled in the presence of sero-valent nickel, triphenylphosphine, and excess sine to form the biphenyl- or terphenyl-containing polymer. AppHcation of this two-step scheme to PPSF can be depicted as follows ... 

One of the important attributes of alkyds is their good compatibiUty with a wide variety of other coating polymers. This good compatibiUty comes from the relatively low molecular weight of the alkyds, and the fact that the resin stmcture contains, on the one hand, a relatively polar and aromatic backbone, and, on the other hand, many aUphatic side chains with low polarity. An alkyd resin in a blend with another coating polymer may serve as a modifier for the other film-former, or it may be the principal film-former and the other polymer may serve as the modifier for the alkyd to enhance certain properties. Examples of compatible blends foUow. 

Polymers. The molecular weights of polymers used in high energy electron radiation-curable coating systems are ca 1,000—25,000 and the polymers usually contain acryUc, methacrylic, or fumaric vinyl unsaturation along or attached to the polymer backbone (4,48). Aromatic or aUphatic diisocyanates react with glycols or alcohol-terrninated polyether or polyester to form either isocyanate or hydroxyl functional polyurethane intermediates. The isocyanate functional polyurethane intermediates react with hydroxyl functional polyurethane and with acryUc or methacrylic acids to form reactive p olyurethanes. 

---