Mass spectrometry sample preparations

Kussmann M, Nordhoff E, Rahbek-Nielsen H, Haebel S, Rossel-Larsen M, Jakobsen L, Gobom J, Mirgorodskaya E, Kroll-Kristensen A, Palm L, Roepstorff P (1997) Matrix-assisted laser desorption/ionization mass spectrometry sample preparation techniques designed for various peptides and protein analytes. J Mass Spectrom 32 593-601... 

Mirgorodskaya, E., Braeuer, C., Fucini, P, Lehrach, FI. and Gobom, J. (2005a) Nanoflow liquid chromatography coupled to matrix-assisted laser desorption/ionization mass spectrometry Sample preparation, data anlysis, and application to the analysis of complex peptide mixtures. Proteomics 5, 399-408. 

Wetzel, S.J., Guttman, C.M. and Flynn, K.M., The influence of electrospray deposition in matrix-assisted laser desorption/ionization mass spectrometry sample preparation for synthetic polymers. Rapid Commun Mass Spectrom, 18 (2004) 1139-1146. 

Kussmann, M., Nordhoff, E., Rahbek-Nielsen, H., Haebel, S., Rossel-Larsen, M., Jakobsen, L., Gobom, J., Mirgorodskaya, E., Kroll-Kristensen, A., Pahn, L., and Roepstorff, R, Matrix-assisted laser desorption/ionization mass spectrometry sample preparation techniques designed for various peptide and protein analytes, Journal of Mass Spectrometry, 32, 593-601, 1997. 

Techniques to Facilitate the Performance of Mass Spectrometry Sample Preparation, Liquid Chromatography, and Non-Mass-Spectrometric Detection... 

Busch, K. L., S. E. Unger, A. Vincze, R. G. Cooks, and T. Keough Desorption Ionization Mass Spectrometry Sample Preparation for Secondary Ion Mass... 

M. Hayward, M. D. Bacolod, Q. P. Han, M. Cajina and Z. Zou, Techniques to Facilitate the Performance of Mass Spectrometry Sample Preparation, Liquid Chromatography, and Non-Mass-Spectrometric Detection, in Mass Spectrometry in Drug Metabolism and Disposition Basic Principles and Applications, ed. M. S. Lee and M. Zhu, John Wiley Sons, Inc., Hoboken, N. J., 2011, p. 353. 

Brown,]. A., Kunz, F.W., and Belitz, R. K. (1991). Characterization of automotive catalysts using inductively coupled plasma mass spectrometry Sample preparation.J. /4 [Pg.199]

Express and easy sample preparation - the homogeneity of the sample is of primary importance in laser mass spectrometry. The preparation of environmental samples includes pure physical manipulation. In the case of ... 

Gold is a useflil caUbration standard for this method (see Radioactive tracers). Whereas similar sensitivities can be achieved by inductively coupled plasma mass spectrometry (qv), the latter requires more extensive sample preparation to overcome interference by other metals such as copper (64). 

Spectrometric Analysis. Remarkable developments ia mass spectrometry (ms) and nuclear magnetic resonance methods (nmr), eg, secondary ion mass spectrometry (sims), plasma desorption (pd), thermospray (tsp), two or three dimensional nmr, high resolution nmr of soHds, give useful stmcture analysis information (131). Because nmr analysis of or N-labeled amino acids enables determiaation of amino acids without isolation from organic samples, and without destroyiag the sample, amino acid metaboHsm can be dynamically analy2ed (132). Proteia metaboHsm and biosynthesis of many important metaboUtes have been studied by this method. Preparative methods for labeled compounds have been reviewed (133). 

The very low Hg concentration levels in ice core of remote glaciers require an ultra-sensitive analytical technique as well as a contamination-free sample preparation methodology. The potential of two analytical techniques for Hg determination - cold vapour inductively coupled plasma mass spectrometry (CV ICP-SFMS) and atomic fluorescence spectrometry (AFS) with gold amalgamation was studied. 

The complex of the following destmctive and nondestmctive analytical methods was used for studying the composition of sponges inductively coupled plasma mass-spectrometry (ICP-MS), X-ray fluorescence (XRF), electron probe microanalysis (EPMA), and atomic absorption spectrometry (AAS). Techniques of sample preparation were developed for each method and their metrological characteristics were defined. Relative standard deviations for all the elements did not exceed 0.25 within detection limit. The accuracy of techniques elaborated was checked with the method of additions and control methods of analysis. 

ICPMS is uniquely able to borrow a quantitation technique from molecular mass spectrometry. Use of the isotope dilution technique involves the addition of a spike having a different isotope ratio to the sample, which has a known isotope ratio. This is usefiil for determining the concentration of an element in a sample that must undergo some preparation before analysis, or for measuring an element with high precision and accuracy. ... 

I. Eeirer, V. Pichon, M. C. Hennion and D. Barcelo, Automated sample preparation with exti action columns by means of anti-isoproturon immunosorbents for the determination of phenylurea herbicides in water followed by liquid chi omatography diode array detection and liquid clrromatogi aphy-atmospheric pressure chemical ionization mass spectrometry , 7. Chromatogr. Ill 91-98 (1997). 

In order to reduce or eliminate off-line sample preparation, multidimensional chromatographic techniques have been employed in these difficult analyses. LC-GC has been employed in numerous applications that involve the analysis of poisonous compounds or metabolites from biological matrices such as fats and tissues, while GC-GC has been employed for complex samples, such as arson propellants and for samples in which special selectivity, such as chiral recognition, is required. Other techniques include on-line sample preparation methods, such as supercritical fluid extraction (SFE)-GC and LC-GC-GC. In many of these applications, the chromatographic method is coupled to mass spectrometry or another spectrometiic detector for final confirmation of the analyte identity, as required by many courts of law. 

Other methods of identification include the customary preparation of derivatives, comparisons with authentic substances whenever possible, and periodate oxidation. Lately, the application of nuclear magnetic resonance spectroscopy has provided an elegant approach to the elucidation of structures and stereochemistry of various deoxy sugars (18). Microcell techniques can provide a spectrum on 5-6 mg. of sample. The practicing chemist is frequently confronted with the problem of having on hand a few milligrams of a product whose structure is unknown. It is especially in such instances that a full appreciation of the functions of mass spectrometry can be developed. 

Mizutani and coworkers57a confirmed the presence of polychloro(methylsulfonyl)biphenyls (159-170) as sulfur-containing metabolites of chlorobiphenyls (Cl-BP) in the feces of mice based on both GLC-mass spectrometry and chemical derivatization. In some cases comparison with authentic samples (161 and 162) was also made. When preparing 161 and 162,2,5-dichloro-3-(methylsulfonyl)aniline, 2,5-dichloro-l-iodo-3-(methylsulfonyl)benzene and 2,2, 5,5 -tetrachloro-3,3 -bis(methyl-sulfonyl)biphenyl were also obtained and their four peak El mass spectra reported572. Similar data were given for the corresponding 4-substituted intermediates, which were involved in the preparation of 162. Also 2,4, 5-trichloro-2 -(methylsulfonyl)-biphenyl was prepared and its four peak mass spectra given. Metabolites 163 and 164 were also identified by comparison with the authentic standards. 

Brain et al. [137] reported a tandem mass spectrometry (MS-MS) procedure by which a direct measurement from an n-pentane extract of a surfactant is possible. This procedure is excellent from the standpoint of sensitivity and simplicity of sample preparation but is not commonly applied because of the need of an MS-MS instrument. 

The preparative reactions were conducted in sealed tubes in which — 1-3 g of the reagents had been placed. After the vessels had been maintained at the indicated temperatures for the designated times, the contents were removed, to be separated by fractional condensation and GLC. In addition to the (trifluoromethyl)Group 4A halides reported next, each sample contained unreacted (CFalaHg, the expected (tri-fluoromethyDmercuric halide, and the mercuric halide, identified by fluorine-NMR spectroscopy and mass spectrometry. 

State-of-the-art TOF-SIMS instruments feature surface sensitivities well below one ppm of a mono layer, mass resolutions well above 10,000, mass accuracies in the ppm range, and lateral and depth resolutions below 100 nm and 1 nm, respectively. They can be applied to a wide variety of materials, all kinds of sample geometries, and to both conductors and insulators without requiring any sample preparation or pretreatment. TOF-SIMS combines high lateral and depth resolution with the extreme sensitivity and variety of information supplied by mass spectrometry (all elements, isotopes, molecules). This combination makes TOF-SIMS a unique technique for surface and thin film analysis, supplying information which is inaccessible by any other surface analytical technique, for example EDX, AES, or XPS. 

Several methods are available for the analysis of trichloroethylene in biological media. The method of choice depends on the nature of the sample matrix cost of analysis required precision, accuracy, and detection limit and turnaround time of the method. The main analytical method used to analyze for the presence of trichloroethylene and its metabolites, trichloroethanol and TCA, in biological samples is separation by gas chromatography (GC) combined with detection by mass spectrometry (MS) or electron capture detection (ECD). Trichloroethylene and/or its metabolites have been detected in exhaled air, blood, urine, breast milk, and tissues. Details on sample preparation, analytical method, and sensitivity and accuracy of selected methods are provided in Table 6-1. 

In a similar study, Gray et al. (60) investigated the possible formation of N-nitrosamines in heated chicken frankfurters which been prepared with various levels of nitrite (0-156 mg/kg). As expected, apparent N-nitrosamine levels increased with increasing concentrations of nitrite, but did not exceed 4 yg/kg except for two samples which contained 8 and II yg/kg of NMOR. The presence of these relatively high levels of NMOR was confirmed by mass spectrometry and raised the question as to its mode of formation. It was shown to be due to the morpholine present in the steam entering the smokehouse, as this amine is commonly used as a corrosion inhibitor in steam process equipment ( ). The detectable levels of NMOR in the Canadian study ( ) were also attributed in part to the use of morpholine as an anti-corrosion agent in the steam supply (62). 

Frankenberger, Jr., and Muhammad Arshad Handbook of Weed Management Systems, edited by Albert E. Smith Soil Sampling, Preparation, and Analysis, Kim H. Tan Soil Erosion, Conservation, and Rehabilitation, edited by Menachem Agassi Plant Roots The Hidden Half, Second Edition, Revised and Expanded, edited by Yoav Waisel, Amram Eshel, and Uzi Kafkafi Photoassimilate Distribution in Plants and Crops Source-Sink Relationships, edited by Eli Zamski and Arthur A. Schaffer Mass Spectrometry of Soils, edited by Thomas W. Boutton and Shinichi Yamasaki... 

All previous discussion has focused on sample preparation, i.e., removal of the targeted analyte(s) from the sample matrix, isolation of the analyte(s) from other co-extracted, undesirable sample components, and transfer of the analytes into a solvent suitable for final analysis. Over the years, numerous types of analytical instruments have been employed for this final analysis step as noted in the preceding text and Tables 3 and 4. Overall, GC and LC are the most often used analytical techniques, and modern GC and LC instrumentation coupled with mass spectrometry (MS) and tandem mass spectrometry (MS/MS) detection systems are currently the analytical techniques of choice. Methods relying on spectrophotometric detection and thin-layer chromatography (TLC) are now rarely employed, except perhaps for qualitative purposes. 

Specifically for triazines in water, multi-residue methods incorporating SPE and LC/MS/MS will soon be available that are capable of measuring numerous parent compounds and all their relevant degradates (including the hydroxytriazines) in one analysis. Continued increases in liquid chromatography/atmospheric pressure ionization tandem mass spectrometry (LC/API-MS/MS) sensitivity will lead to methods requiring no aqueous sample preparation at all, and portions of water samples will be injected directly into the LC column. The use of SPE and GC or LC coupled with MS and MS/MS systems will also be applied routinely to the analysis of more complex sample matrices such as soil and crop and animal tissues. However, the analyte(s) must first be removed from the sample matrix, and additional research is needed to develop more efficient extraction procedures. Increased selectivity during extraction also simplifies the sample purification requirements prior to injection. Certainly, miniaturization of all aspects of the analysis (sample extraction, purification, and instrumentation) will continue, and some of this may involve SEE, subcritical and microwave extraction, sonication, others or even combinations of these techniques for the initial isolation of the analyte(s) from the bulk of the sample matrix. 

The need to understand the fate of pesticides in the environment has necessitated the development of analytical methods for the determination of residues in environmental media. Adoption of methods utilizing instrumentation such as gas chro-matography/mass spectrometry (GC/MS), liquid chromatography/mass spectrometry (LC/MS), liquid chromatography/tandem mass spectrometry (LC/MS/MS), or enzyme-linked immunosorbent assay (ELISA) has allowed the detection of minute amounts of pesticides and their degradation products in environmental samples. Sample preparation techniques such as solid-phase extraction (SPE), accelerated solvent extraction (ASE), or solid-phase microextraction (SPME) have also been important in the development of more reliable and sensitive analytical methods. 

---