Electron-capture detection

The special problems for vaUdation presented by chiral separations can be even more burdensome for gc because most methods of detection (eg, flame ionization detection or electron capture detection) in gc destroy the sample. Even when nondestmctive detection (eg, thermal conductivity) is used, individual peak collection is generally more difficult than in Ic or tic. Thus, off-line chiroptical analysis is not usually an option. Eortunately, gc can be readily coupled to a mass spectrometer and is routinely used to vaUdate a chiral separation. 

The analysis of mefloquine in blood, using packed-column sfc, a mobile phase consisting of / -pentane modified with 1% methanol and 0.15% -butylamine, and electron capture detection has been reported (92). The method compares favorably to a previously pubflshed hplc-based procedure having a detection limit of 7.5 ng/mLin 0.1 mL blood sample. 

Aroclor 1248, Aroclor 1254, and Aroclor 1260. Quantitation is by comparison of chromatograms with standard concentrations of pure compounds treated in an identical manner. The phenoxy acid herbicides (2,4-dichlorophenoxy)acetic acid (2,4-D), sUvex, and (2,4,5-trichlorophenoxy)acetic acid (2,4,5-T) can be deterrnined by electron-capture detection after extraction and conversion to the methyl esters with BF.-methanol. The water sample must be acidified to pH <2 prior to extraction with chloroform. 

J. Staniewski, H. G. Janssen, J. A. Rijks and C. A. Cramers, Inti oduction of large volumes of methylene cWoi ide in capillaiy GC with electron capture detection , in... 

The first bioanalytical application of LC-GC was presented by Grob et al. (119). These authors proposed this coupled system for the determination of diethylstilbe-strol in urine as a replacement for GC-MS. After hydrolysis, clean-up by solid-phase extraction and derivatization by pentafluorobenzyl bromide, the extract was separated with normal-phase LC by using cyclohexane/1 % tetrahydrofuran (THE) at a flow-rate of 260 p.l/min as the mobile phase. The result of LC-UV analysis of a urine sample and GC with electron-capture detection (ECD) of the LC fraction are shown in Ligures 11.8(a) and (b), respectively. The practical detection limits varied between about 0.1 and 0.3 ppb, depending on the urine being analysed. By use of... 

In this core, concentrations of PCBs (determined as Aroclor 1254 and 1260, by high resolution gas chromatography, electron capture detection and high resolution gas chromatography-low resolution mass spectrometry) were <30 ng and those of total DDT (p,p DDT + p,p DDD + p,p DDE) <5 ng g Campesan et al. (21) in 11 sediment samples from Valle di Brenta, determined by GC-ECD the following mean concentrations (ng gd.w.) ... 

Several methods are available for the analysis of trichloroethylene in biological media. The method of choice depends on the nature of the sample matrix cost of analysis required precision, accuracy, and detection limit and turnaround time of the method. The main analytical method used to analyze for the presence of trichloroethylene and its metabolites, trichloroethanol and TCA, in biological samples is separation by gas chromatography (GC) combined with detection by mass spectrometry (MS) or electron capture detection (ECD). Trichloroethylene and/or its metabolites have been detected in exhaled air, blood, urine, breast milk, and tissues. Details on sample preparation, analytical method, and sensitivity and accuracy of selected methods are provided in Table 6-1. 

Janak K, G Becker, A Colmsjo, C Ostman, M Athanasiadou, K Valters, A Bergman (1998) Methyl sulfonyl polychlorinated biphenyls and 2,2-bis(4-chlorophenyl)-l,l-dichloroethene in gray seal tissues determinated by gas chromatography with electron capture detection and atomic emission detection. Environ Toxicol Chem 17 1046-1055. 

ECD Electron capture detection Ko, Kqc Soil sorption coefficients... 

The presence of heteroatoms usually provides a convenient feature for improving selectivity by employing selective detection mechanisms. GC may then use flame photometric detection (FPD) for S and P atoms and to a certain extent for N, Se, Si etc. thermoselective detection (TSD) and nitrogen-phosphorus detection (NPD) for N and P atoms electron capture detection (ECD) for halogen atoms (E, Cl, Br, and 1) and for systems with conjugated double bonds and electron-drawing groups or atomic emission detection (AED) for many heteroatoms. 

Residue analytical chemistry has extended its scope in recent decades from the simple analysis of chlorinated, lipophilic, nonpolar, persistent insecticides - analyzed in the first Si02 fraction after the all-destroying sulfuric acid cleanup by a gas chro-matography/electron capture detection (GC/ECD) method that was sometimes too sensitive to provide linearity beyond the required final concentration - to the monitoring of polar, even ionic, hydrophilic pesticides with structures giving the chemist no useful feature other than the molecule itself, hopefully to be ionized and fragmented for MS or MS" detection. 

ECD, electron capture detection NPD, nitrogen-phosphorus detection MS, mass spectrometry. 

Analytical methods for parent chloroacetanilide herbicides in soil typically involve extraction of the soil with solvent, followed by solid-phase extraction (SPE), and analysis by gas chromatography/electron capture detection (GC/ECD) or gas chromatog-raphy/mass spectrometry (GC/MS). Analytical methods for parent chloroacetanilides in water are similarly based on extraction followed by GC with various detection techniques. Many of the water methods, such as the Environmental Protection Agency (EPA) official methods, are multi-residue methods that include other compound classes in addition to chloroacetanilides. While liquid-liquid partitioning was used initially to extract acetanilides from water samples, SPE using... 

Gas chromatograph injector liner [for gas chromatography/electron capture detection (GC/ECD)], cyclouniliner insert, Restek (cat. No. 20337)... 

Visible wavelength spectrophotometry Mass selective detection Nitrogen-phosphorus detection Electron capture detection UV detection... 

Universal and selective detectors, linked to GC or LC systems, have remained the predominant choice of analysts for the past two decades for the determination of pesticide residues in food. Although the introduction of bench-top mass spectrometers has enabled analysts to produce more unequivocal residue data for most pesticides, in many laboratories the use of selective detection methods, such as flame photometric detection (FPD), electron capture detection (BCD) and alkali flame ionization detection (AFID) or nitrogen-phosphorus detection (NPD), continues. Many of the new technologies associated with the on-going development of instrumental methods are discussed. However, the main objective of this section is to describe modern techniques that have been demonstrated to be of use to the pesticide residue analyst. 

The most common final separation techniques used for agrochemicals are GC and LC. A variety of detection methods are used for GC such as electron capture detection (BCD), nitrogen-phosphorus detection (NPD), flame photometric detection (FPD) and mass spectrometry (MS). For LC, typical detection methods are ultraviolet (UV) detection, fluorescence detection or, increasingly, different types of MS. The excellent selectivity and sensitivity of LC/MS/MS instruments results in simplified analytical methodology (e.g., less cleanup, smaller sample weight and smaller aliquots of the extract). As a result, this state-of-the-art technique is becoming the detection method of choice in many residue analytical laboratories. 

The residue-containing eluate from the GPC step is evaporated and analyzed by GC with nitrogen/phosphorus detection (NPD) (Modules D3 and D4) or mass spectrometry (MS) detection. For GC with electron capture detection (ECD) (Module Dl), the GPC eluate requires an additional cleanup on a small silica gel column. 

North America/Intemational Maritime Dangerous Goods Code Drinking Water Exposure Level electron capture detection... 

Glausch, A., Blanch, G.P., Schurig, V. (1996). Enantioselective analysis of chiral polychlorinated biphenyls in sediment samples by multidimensional gas chromatography-electron-capture detection after steam distillation-solvent extraction and sulfur removal. J. Chromatogr. A 723, 399 104. 

---