Spectrometric analysis

Physicochemical methods are the most commonly employed and include the phases of extraction, purification, and final analysis. All these steps are critical in the vitamin evaluation. Extraction steps can include several treatments, such as heat, acid or alkali conditions, enzymes, and solvents, and these treatments have several purposes, such as vitamin stabilization and their release from other food components. Cleanup steps remove interfering compounds and are not necessary in many methods. Final determination and quantification can be mainly carried out by chromatographic [Table 8.1 summarizes some common high-performance liquid chromatography (HPLC) methods applied to water-soluble vitamin analysis], spectrometric, enzymatic, inmunological, or radiometric techniques. 

These equations indicate that the energy of the scattered ions is sensitive to the mass of the scattering atom s in the surface. By scanning the energy of the scattered ions, one obtains a kind of mass spectrometric analysis of the surface composition. Figure VIII-12 shows an example of such a spectrum. Neutral, that is, molecular, as well as ion beams may be used, although for the former a velocity selector is now needed to define ,. ... 

It is interesting to note that recent evidence shows that even extra-terrestrially formed hydrocarbons can reach the Earth. The Earth continues to receive some 40,000 tons of interplanetary dust every year. Mass-spectrometric analysis has revealed the presence of hydrocarbons attached to these dust particles, including polycyclic aromatics such as phenanthrene, chrysene, pyrene, benzopyrene, and pentacene of extraterrestrial origin indicated by anomalous isotopic ratios. 

The most stable protected alcohol derivatives are the methyl ethers. These are often employed in carbohydrate chemistry and can be made with dimethyl sulfate in the presence of aqueous sodium or barium hydroxides in DMF or DMSO. Simple ethers may be cleaved by treatment with BCI3 or BBr, but generally methyl ethers are too stable to be used for routine protection of alcohols. They are more useful as volatile derivatives in gas-chromatographic and mass-spectrometric analyses. So the most labile (trimethylsilyl ether) and the most stable (methyl ether) alcohol derivatives are useful in analysis, but in synthesis they can be used only in exceptional cases. In synthesis, easily accessible intermediates of medium stability are most helpful. 

Laser desorption to produce ions for mass spectrometric analysis is discussed in Chapter 2. As heating devices, lasers are convenient when much energy is needed in a very small space. A typical laser power is 10 ° W/cm. When applied to a solid, the power of a typical laser beam — a few tens of micrometers in diameter — can lead to very strong localized heating that is sufficient to vaporize the solid (ablation). Some of the factors controlling heating with lasers and laser ablation are covered in Figure 17.2. 

To achieve sufficient vapor pressure for El and Cl, a nonvolatile liquid will have to be heated strongly, but this heating may lead to its thermal degradation. If thermal instability is a problem, then inlet/ionization systems need to be considered, since these do not require prevolatilization of the sample before mass spectrometric analysis. This problem has led to the development of inlet/ionization systems that can operate at atmospheric pressure and ambient temperatures. Successive developments have led to the introduction of techniques such as fast-atom bombardment (FAB), fast-ion bombardment (FIB), dynamic FAB, thermospray, plasmaspray, electrospray, and APCI. Only the last two techniques are in common use. Further aspects of liquids in their role as solvents for samples are considered below. 

For mass spectrometric analysis of an analyte solution using a plasma torch, it is necessary to break down the solution into a fine droplet form that can be swept into the flame by a stream of argon gas. On the way to the flame, the droplets become even smaller and can eventually lose all solvent to leave dry analyte particulate matter. This fine residual matter can be fragmented and ionized in the plasma flame without disturbing its operation. 

Dynamic headspace GC/MS. The distillation of volatile and semivolatile compounds into a continuously flowing stream of carrier gas and into a device for trapping sample components. Contents of the trap are then introduced onto a gas chromatographic column. This is followed by mass spectrometric analysis of compounds eluting from the gas chromatograph. 

Stable ion. An ion that is not sufficiently excited to dissociate into a daughter ion and associated neutral fragments, or to react further in the time frame of the mass spectrometric analysis under stated experimental conditions. 

Individual analyses for each amino acid have also been estabUshed (119), in particular, EdeUioch spectrometric analysis for tryptophan (120) and Elhnan colormetric analysis (121) for cysteine are often used. 

Spectrometric Analysis. Remarkable developments ia mass spectrometry (ms) and nuclear magnetic resonance methods (nmr), eg, secondary ion mass spectrometry (sims), plasma desorption (pd), thermospray (tsp), two or three dimensional nmr, high resolution nmr of soHds, give useful stmcture analysis information (131). Because nmr analysis of or N-labeled amino acids enables determiaation of amino acids without isolation from organic samples, and without destroyiag the sample, amino acid metaboHsm can be dynamically analy2ed (132). Proteia metaboHsm and biosynthesis of many important metaboUtes have been studied by this method. Preparative methods for labeled compounds have been reviewed (133). 

APPLICATION OF LASER BASED MASS-SPECTROMETRIC METHODS FOR TRACE ANALYSIS OF SYNTHETIC AND NATURAL CRYSTALS... 

Laser based mass spectrometric methods, such as laser ionization (LIMS) and laser ablation in combination with inductively coupled plasma mass spectrometry (LA-ICP-MS) are powerful analytical techniques for survey analysis of solid substances. To realize the analytical performances methods for the direct trace analysis of synthetic and natural crystals modification of a traditional analytical technique was necessary and suitable standard reference materials (SRM) were required. Recent developments allowed extending the range of analytical applications of LIMS and LA-ICP-MS will be presented and discussed. For example ... 

Sputtered Neutral Mass Spectrometry (SNMS) is the mass spectrometric analysis of sputtered atoms ejected from a solid surface by energetic ion bombardment. The sputtered atoms are ionized for mass spectrometric analysis by a mechanism separate from the sputtering atomization. As such, SNMS is complementary to Secondary Ion Mass Spectrometry (SIMS), which is the mass spectrometric analysis of sputtered ions, as distinct from sputtered atoms. The forte of SNMS analysis, compared to SIMS, is the accurate measurement of concentration depth profiles through chemically complex thin-film structures, including interfaces, with excellent depth resolution and to trace concentration levels. Genetically both SALI and GDMS are specific examples of SNMS. In this article we concentrate on post ionization only by electron impact. 

E. P. Bertin. Principles and Practice X-Ray Spectrometric Analysis. Plenum, New York, 1970. A practical textbook that also serves as a laboratory handbook, although somewhat dated. 

Figura 1 Schematic of SNMS analysis. Neutral atoms and molecules sputtered from the sample surface by energetic ion bombardment are subsequently ionized for mass spectrometric analysis.

It is very evident in Figure 3 that the chemical complexity of Hasteloy presents special problems for mass spectrometric analysis using a quadrupole mass spectrometer with low mass resolution. Molecular ions comprised of combinations of matrix and plasma atoms are formed in abundance and will obscure many elements... 

Useful yield provides an overall measure of the extent to which the sputtered material is used for analysis. It is a quantity employed to estimate the sensitivity of the mass spectrometric method. Values of Y (X (A)) for elements typically range from 10 to 10 in TOF SIMS. The number of sputtered particles A per incident primary ion (sputtering yield) can be measured from elemental and multielemental standards under different operational conditions and can, therefore, by judicious interpolation between standards, be estimated with reasonable accuracy for the material being analyzed. 

Several techniques which combine imaging with spectrometric (compositional) analysis have now been explained. It is time to move on to straight spectrometry. 

Somewhat later, Travis and Busch reported that extraction of the residue from Eq. (6.8) with hot ethanol afforded the dimer of 10 in 25% yield . The latter, 1,4,8,11, 15,18,22,25-octathiooctacosane, was characterized by mass spectrometric analysis as well as the customary analytical methods. It was found that by dilution of reactants prior to mixing, the yield of [monomer] is greatly increased (50—60%) while the yield of [dimer] is lowered substantially . One might have expected the larger rather than the smaller ring to be more favored at higher dilution, but there is no further comment on this point. 

In spite of numerous advances in the field of detection there are not and never have been any genuinely substance-specific chemical detection reactions. This means that, unlike the spectrometric methods, the methods of detection normally employed in chromatography cannot be employed for an unequivocal identification of compounds, they can only provide more or less definite indications for the characterization of the separated substances. Universal reagents are usually employed for a first analysis of the separation of samples of unknowns. This is then followed by the use of group-specific reagents. The more individual the pieces of information that can be provided from various sources for a presumed substance the more certainly is its presence indicated. However, all this evidence remains indicative it is not a confirmation of identity. 

Under certain conditions surface catalytic deuterations can lead to the exchange of benzylic hydrogens. An example in the steroid field is the exchange of the benzylic hydrogens in estrone methyl ether (42) with deuterium in the presence of palladized charcoal." " According to mass spectrometric analysis, the product (43) contains three deuteriums (83 %), which have been assigned to the 6- and 9a-positions on the basis of NMR evidence." " ... 

Mann, M., and Wilm, M., 1995. Electro.spray ma.ss. spectrometry for protein characterization. Trends in Biochemical Sciences 20 219-224. A review of die ba.sic application of ma.ss. spectrometric methods to the analysis of protein. sequence and. structure. 

ATPase inhibitor. In such patients, inhibition of the sodium pump in the cells lining the blood vessel wall results in accumulation of sodium and calcium in these cells and the narrowing of the vessels to create hypertension. An 8-year study aimed at the isolation and identification of the agent responsible for these effects by researchers at the University of Maryland Medical School and the Upjohn Laboratories in Michigan recently yielded a surprising result. Mass spectrometric analysis of compounds isolated from many hundreds of gallons of blood plasma has revealed that the hypertensive agent is ouabain itself or a closely related molecule ... 

Laser vaporization of a composite pressed disc of graphite and BN using He as carrier gas, followed by mass spectrometric analysis, gave a range of clusters with even numbers of atoms from less than 50 to well above the peak... 

What is common to all of these areas is that the relevant number of published GC-GC papers is very small when compared to those concerning single-column and GC-MS methods. While approximately 1000 papers per year are currently published on single-column GC methods and, in recent years, nearly 750 per year on GC-MS techniques, only around 50 per annum have been produced on two-dimensional GC. Of course, this may not be a true reflection of the extent to which two-dimensional GC is utilized, but it is certainly the case that research interest in its application is very much secondary to that of mass spectrometric couplings. A number of the subject areas where two-dimensional methods have been applied do highlight the limitations that exist in single-column and MS-separation analysis. 

A large amount of fuel and environmentally based analysis is focused on the determination of aliphatic and aromatic content. These types of species are often notoriously difficult to deconvolute by mass spectrometric means, and resolution at the isomeric level is almost only possible by using chromatographic methods. Similarly, the areas of organohalogen and flavours/fragrance analysis are dominated by a need to often quantify chiral compounds, which in the same way as aliphatic... 

G. S. Frysinger and R. B. Gaines, Comprehensive two-dimensional gas chromatogr aphy with mass spectrometric detection, (GC X GC/MS) applied to the analysis of petr oleum , /. High Resolut. Chromatogr. 22 251 -255 (1999). 

American Society for Testing Materials, "Symposium on Fluorescent X-ray Spectro-graphic Analysis/ Am, Soc. Testing Materials Spec. Tech. Tubl., No. 157 (1954). W. G. Berl, editor, Physical Methods in Chemical Analysis, Vol. Ill, G. L. Clark, "fluorescent X-ray Spectrometric Analysis," Academic Press, New York, 1956, pages 383-399. 

---