Animal composition

Environmental and storage conditions that are ideal for a whole animal are generally good for parts of the same animal. Composite objects, however, must be considered for all the different materials they contain, and an environmental compromise reached that will be the best for the thing as a whole. 

Glycine buffer (0.2 mol. pH 10.5) that is four times the weight of the animal composition (liver, muscle) is ground in a Waring blender with twice the chloroform (washed with water). Separate the water layer using centrifugation, and add twice the glycine buffer to the middle layer and chloroform layer to reprocess. Repeat this operation five times, combine the water layers obtained and Ifeeze at —20°C. 

Figure 15.4 A plant for the production of animal feed. The heat pump encroaches into a pocket in the gremd composite curve. (From Smith and Linnhojf, Trans. IChemE, ChERD, 66 195, 1988 reproduced by permission of the Institution of Chemical Engineers.)...

The short-term exposure of humans, animals, and plants to gaseous pollutants is more severe than that for pollutants in other matrices. Since the composition of atmospheric gases can show a substantial variation over a time, the continuous monitoring of atmospheric gases such as O3, CO, SO2, NH3, H2O2, and NO2 by in situ sampling is important. 

Fats and oils may be synthesized in enantiomerically pure forms in the laboratory (30) or derived from vegetable sources (mainly from nuts, beans, and seeds), animal depot fats, fish, or marine mammals. Oils obtained from other sources differ markedly in their fatty acid distribution. Table 2 shows compositions for a wide variety of oils. One variation in composition is the chain length of the fatty acid. Butterfat, for example, has a fairly high concentration of short- and medium-chain saturated fatty acids. Oils derived from cuphea are also a rich source of capric acid which is considered to be medium in chain length (32). Palm kernel and coconut oils are known as lauric oils because of their high content of C-12 saturated fatty acid (lauric acid). Rapeseed oil, on the other hand, has a fairly high concentration of long-chain (C-20 and C-22) fatty acids. 

There is no best feed composition because animals thrive on diets composed of many different types of iagredients. Swiae and poultry generally adapt readily and rapidly to changes ia ingredient composition, as long as the diets provide adequate levels of essential nutrients. Tables 2 through 6 Hst information on the nutrient requirements of various types of swiae and poultry. 

Legume forages, such as alfalfa or clover, are considered high quaHty, readily available protein sources. Animal sources of supplemental protein include meat and bone meal blood meal, 80% CP fish meal other marine products and hydroly2ed feathermeal, 85—90% CP. Additionally, synthetic amino acids are available commercially. Several sources (3,9,19) provide information about the protein or amino acid composition of feedstuffs. 

Tables 2, 3, and 4 hst compositional and nutritional data of selected algae. Mote extensive compilations on algae ate available (26,58). Algae tend to have lower contents of methionine than is deskable in human and animal nutrition and supplementation with this amino acid is necessary with many species (Table 4).

The nutrient sparing effect of antibiotics may result from reduction or elimination of bacteria competing for consumed and available nutrients. It is also recognized that certain bacteria synthesize vitamins (qv), amino acids (qv), or proteins that may be utilized by the host animal. Support of this mode of action is found in the observed nutritional interactions with subtherapeutic use of antibiotics in animal feeds. Protein concentration and digestibiHty, and amino acid composition of consumed proteins may all influence the magnitude of response to feeding antibiotics. Positive effects appear to be largest... 

The more variable responses with growing catde appear to result from lower doses, nutritional constraints, or lesser responsiveness of younger animals, ie, veal calves. A dose-dependent reduction in feed intake in finishing cattle, which also reduced average daily gain, has been observed (84). However, carcass composition was improved in a dose-dependent manner. 

In certain brilliantine compositions, vegetable and animal oils are used as substitutes for mineral oil. In these systems, because of their potential for rancidity, antioxidants must be included. Other alternatives to mineral oils that have found utiHty in brilliantines are the polyethylene glycols which come in a variety of solubiHties and spreading properties. Use of these materials offers the advantage of chemical stabiHty to rancidity. Other additives found in brilliantines to improve their aesthetics include colorants, fragrance, medicated additives, lanolin, and fatty acid esters. 

The sacroplasmic proteins myoglobin and hemoglobin are responsible for much of the color in meat. Species vary tremendously in the amount of sacroplasmic proteins within skeletal muscle with catde, sheep, pigs, and poultry Hsted in declining order of sarcoplasmic protein content. Fat is also an important component of meat products. The amount of fat in a portion of meat varies depending on the species, anatomy, and state of nutrition of the animal. The properties of processed meat products are greatiy dependent on the properties of the fat included. Certain species, such as sheep, have a relatively higher proportion of saturated fat, whereas other species, such as poultry, have a relatively lower proportion of saturated fat. It is well known that the characteristic davors of meat from different species are in part determined by their fat composition. 

The TEM is one of the most generally useful microscopes many thousands of them ate in daily use throughout the world. They ate appHcable to the study of ultrafine particles (eg, pigments abrasives and carbon blacks) as well as microtomed thin sections of plant and animal tissue, paper, polymers, composites of all kinds, foods, industrial materials, etc. Even metals can be thinned to sections thin enough for detailed examination. 

Milk consists of 85—89% water and 11—15% total soflds (Table 1) the latter comprises soflds-not-fat (SNF) and fat. Milk having a higher fat content also has higher SNF, with an increase of 0.4% SNF for each 1% fat increase. The principal components of SNF are protein, lactose, and minerals (ash). The fat content and other constituents of the milk vary with the animal species, and the composition of milk varies with feed, stage of lactation, health of the animal, location of withdrawal from the udder, and seasonal and environmental conditions. The nonfat soflds, fat soflds, and moisture relationships are well estabhshed and can be used as a basis for detecting adulteration with water (qv). Physical properties of milk are given in Table 2. 

Solvent Extraction. Extraction processes, used for separating one substance from another, are commonly employed in the pharmaceutical and food processing industries. Oilseed extraction is the most widely used extraction process on the basis of tons processed. Extraction-grade hexane is the solvent used to extract soybeans, cottonseed, com, peanuts, and other oilseeds to produce edible oils and meal used for animal feed supplements. Tight specifications require a narrow distillation range to minimize solvent losses as well as an extremely low benzene content. The specification also has a composition requirement, which is very unusual for a hydrocarbon, where the different components of the solvent must be present within certain ranges (see Exthaction). 

Compositae (composite) Helianthus annuus Argentina, FSU, EU-15, United States edible oil, animal feed, food... 

---