Proton fuel cell

Alkaline fuel cells (AFC) — The first practical -+fuel cell (FC) was introduced by -> Bacon [i]. This was an alkaline fuel cell using a nickel anode, a nickel oxide cathode, and an alkaline aqueous electrolyte solution. The alkaline fuel cell (AFC) is classified among the low-temperature FCs. As such, it is advantageous over the protonic fuel cells, namely the -> polymer-electrolyte-membrane fuel cells (PEM) and the - phosphoric acid fuel cells, which require a large amount of platinum, making them too expensive. The fast oxygen reduction kinetics and the non-platinum cathode catalyst make the alkaline cell attractive. 

Hydrogen electrode reactions, that is hydrogen oxidation reaction (HOR) and hydrogen evolution reaction (HER) present one of the most important gas electrode reactions. When concerned with energy conversion applications HOR is particularly important as it presents anode reaction in proton fuel cells, while HER is cathode reaction in the case of water electrolysis. With overall reaction being ... 

As already mentioned, understanding of CO interaction with Pt-based surfaces is important for proton fuel cells, while anodic CO stripping voltammetry can be used to probe catalyst smface. 

The concept of the reversed fuel cell, as shown schematically, consists of two parts. One is the already discussed direct oxidation fuel cell. The other consists of an electrochemical cell consisting of a membrane electrode assembly where the anode comprises Pt/C (or related) catalysts and the cathode, various metal catalysts on carbon. The membrane used is the new proton-conducting PEM-type membrane we developed, which minimizes crossover. 

Polymer Electrolyte Fuel Cell. The electrolyte in a PEFC is an ion-exchange (qv) membrane, a fluorinated sulfonic acid polymer, which is a proton conductor (see Membrane technology). The only Hquid present in this fuel cell is the product water thus corrosion problems are minimal. Water management in the membrane is critical for efficient performance. The fuel cell must operate under conditions where the by-product water does not evaporate faster than it is produced because the membrane must be hydrated to maintain acceptable proton conductivity. Because of the limitation on the operating temperature, usually less than 120°C, H2-rich gas having Htde or no (

Because of this extreme sensitivity, attention shifted to an acidic system, the phosphoric acid fuel cell (PAFC), for other applications. Although it is tolerant to CO, the need for liquid water to be present to facilitate proton migration adds complexity to the system. It is now a relatively mature technology, having been developed extensively for stationary power usage, and 200 kW units (designed for co-generation) are currently for sale and have demonstrated 40,000 hours of operation. An 11 MW model has also been tested. 

The most promising fuel cell for transportation purposes was initially developed in the 1960s and is called the proton-exchange membrane fuel cell (PEMFC). Compared with the PAFC, it has much greater power density state-of-the-art PEMFC stacks can produce in excess of 1 kWA. It is also potentially less expensive and, because it uses a thin solid polymer electrolyte sheet, it has relatively few sealing and corrosion issues and no problems associated tvith electrolyte dilution by the product water. 

Fuel cells can run on fuels other than hydrogen. In the direct methanol fuel cell (DMFC), a dilute methanol solution ( 3%) is fed directly into the anode, and a multistep process causes the liberation of protons and electrons together with conversion to water and carbon dioxide. Because no fuel processor is required, the system is conceptually vei"y attractive. However, the multistep process is understandably less rapid than the simpler hydrogen reaction, and this causes the direct methanol fuel cell stack to produce less power and to need more catalyst. 

As with batteries, differences in electrolytes create several types of fuel cells. The automobile s demanding requirements for compactness and fast start-up have led to the Proton Exchange Membrane (PEM) fuel cell being the preferred type. This fuel cell has an electrolyte made of a solid polymer. 

Ren, X. Springer, T. E. and Gottesfeld, S. (1998). Direct Methanol Fuel Cell Transport Properties of the Polymer Electrolyte Membrane and Cell Performance. Vol. 98-27. Proc. 2nd International Symposium on Proton Conducting Membrane Euel Cells. Pennington, NJ Electrochemical Society. 

Ford Motor Company. (1997). Direct Ilydrogcn-Fuclcd Proton Exchange Membrane Fuel Cell System for Transportation Applications Hydrogen Vehicle... 

Proton Exchange Membrane Fuel Cells (PEMFCs)... 

A fuel cell is an electrochemical reactor with an anodic compartment for the fuel oxidation giving a proton and a cathodic compartment for the reaction of the proton with oxygen. Two scientific problems must be solved finding a low-cost efficient catalyst and finding a membrane for the separation of anodic and cathodic compartments. The membrane is a poly electrolyte allowing the transfer of hydrated proton but being barrier for the gases. 

Propylene glycol, glycolysis of polyurethanes with, 572 Propylene oxide (PO), glycolysis of polyurethanes with, 572-573 Propylene oxide (PO) polyols, 211, 223 Proton exchange membrane fuel cells (PEMFCs), 272-273 Proton NMR integrations, 386. See also H NMR spectroscopy Protonic acids, reactions catalyzed by, 67-68... 

Today, the term solid electrolyte or fast ionic conductor or, sometimes, superionic conductor is used to describe solid materials whose conductivity is wholly due to ionic displacement. Mixed conductors exhibit both ionic and electronic conductivity. Solid electrolytes range from hard, refractory materials, such as 8 mol% Y2C>3-stabilized Zr02(YSZ) or sodium fT-AbCb (NaAluOn), to soft proton-exchange polymeric membranes such as Du Pont s Nafion and include compounds that are stoichiometric (Agl), non-stoichiometric (sodium J3"-A12C>3) or doped (YSZ). The preparation, properties, and some applications of solid electrolytes have been discussed in a number of books2 5 and reviews.6,7 The main commercial application of solid electrolytes is in gas sensors.8,9 Another emerging application is in solid oxide fuel cells.4,5,1, n... 

This proton exchange membrane is used in both hydrogen and methanol fuel cells, in which a catalyst at the anode produces hydrogen from the methanol. Because the membrane allows the protons, but not the electrons, to travel through it, the protons flow through the porous membrane to the cathode, where they combine with oxygen to form water, while the electrons flow through an external circuit. 

This automobile is powered by a hydrogen fuel cell with a proton exchange membrane. Its operation is pollution free, because the onl product of the combustion is water. 

PEMFC proton exchange membrane fuel cell... 

A fuel cell is a layered structure consisting of an anode, a cathode, and a solid electrolyte (Fig. 8.31). Hydrogen reacts on the anode, typically Pt or Pt/Ru nano-particles deposited on a conducting graphite support, where it is oxidized into protons and electrons ... 

Figure 8.31. Principle of a Polymer Electrolyte Membrane (PEM) fuel cell. A Nation membrane sandwiched between electrodes separates hydrogen and oxygen. Hydrogen is oxidized into protons and electrons at the anode on the left. Electrons flow through the outer circuit, while protons diffuse through the...

The catalysts at the anode can be made less sensitive to CO poisoning by alloying platinum with other metals such as ruthenium, antimony or tin[N.M. Markovic and P.N. Ross, New Flectro catalysts for fuel cells CATTECH 4 (2001) 110]. There is a clear demand for better and cheaper catalysts. Another way to circumvent the CO problem is to use proton-exchange membranes that operate at higher temperatures, where CO desorbs. Such membranes have been developed, but are not at present commercially available. 

The electrocatalytic oxidation of methanol has been widely investigated for exploitation in the so-called direct methanol fuel cell (DMFC). The most likely type of DMFC to be commercialized in the near future seems to be the polymer electrolyte membrane DMFC using proton exchange membrane, a special form of low-temperature fuel cell based on PEM technology. In this cell, methanol (a liquid fuel available at low cost, easily handled, stored, and transported) is dissolved in an acid electrolyte and burned directly by air to carbon dioxide. The prominence of the DMFCs with respect to safety, simple device fabrication, and low cost has rendered them promising candidates for applications ranging from portable power sources to secondary cells for prospective electric vehicles. Notwithstanding, DMFCs were... 

In the phosphoric acid fuel cell as currently practiced, a premium (hydrogen rich) hydrocarbon (e.g. methane) fuel is steam reformed to produce a hydrogen feedstock to the cell stack for direct (electrochemical) conversion to electrical energy. At the fuel electrode, hydrogen ionization is accomplished by use of a catalytic material (e.g. Pt, Pd, or Ru) to form solvated protons. 

Reforming 573 K Shift-Conversion Phosphoric Acid, 473 K or Proton Exchange Membrane Fuel Cells, 363 K... 

PAFC, phosphoric acid fuei ceii MCFC, moiten carbonate fuei ceii SOFC, soiid oxide fuei ceii PEMFC, proton exchange membrane fuei ceii DMFC, direct methanoi fuei ceii AFC, alkaiine fuel cell. 

---