Proton Exchange Membrane Fuel Cells PEMFC

PROTON-EXCHANGE MEMBRANE FUEL CELLS (PEMFC ) 

The membranes in polymeric proton-exchange membrane fuel cells (PEMFC) serve as a solid electrolyte. The membrane s conductivity comes about because in the presence of water it swells, a process leading to the dissociation of the acidic functional groups and formation of protons free to move about throughout the membrane. 

The electrochemical reactions occurring at the electrodes of polymer electrolyte membrane fuel cells, as well as the overall current-producing reaction are the same as in the hydrogen-oxygen fuel cells with liquid acidic electrolyte discussed in Section 16.4 (Eqs. 16.2 and 16.3). 

It will become obvious from the following outline that an important fact to remember when looking at polymer membrane is the hydration of protons in the aqueous medium. The protons always exist in the form of species H nHjO. During discharge of the cell, when current flows, the hydrated protons migrate in the membrane from the anode toward the cathode, each proton dragging along n water molecules in the same direction. 

---

The most promising fuel cell for transportation purposes was initially developed in the 1960s and is called the proton-exchange membrane fuel cell (PEMFC). Compared with the PAFC, it has much greater power density state-of-the-art PEMFC stacks can produce in excess of 1 kWA. It is also potentially less expensive and, because it uses a thin solid polymer electrolyte sheet, it has relatively few sealing and corrosion issues and no problems associated tvith electrolyte dilution by the product water. 

Proton Exchange Membrane Fuel Cells (PEMFCs)... 

Propylene glycol, glycolysis of polyurethanes with, 572 Propylene oxide (PO), glycolysis of polyurethanes with, 572-573 Propylene oxide (PO) polyols, 211, 223 Proton exchange membrane fuel cells (PEMFCs), 272-273 Proton NMR integrations, 386. See also H NMR spectroscopy Protonic acids, reactions catalyzed by, 67-68... 

Membrane-type fuel cells. The electrolyte is a polymeric ion-exchange membrane the working temperatures are 60 to 100°C. Such systems were first used in Gemini spaceships. These fuel cells subsequently saw a rather broad development and are known as (solid) polymer electrolyte or proton-exchange membrane fuel cells (PEMFCs). 

Significant (and even spectacular) results were contributed by the group of Norskov to the field of electrocatalysis [102-105]. Theoretical calculations led to the design of novel nanoparticulate anode catalysts for proton exchange membrane fuel cells (PEMFC) which are composed of trimetallic systems where which PtRu is alloyed with a third, non-noble metal such as Co, Ni, or W. Remarkably, the activity trends observed experimentally when using Pt-, PtRu-, PtRuNi-, and PtRuCo electrocatalysts corresponded exactly with the theoretical predictions (cf. Figure 5(a) and (b)) [102]. 

There are six different types of fuel cells (Table 1.6) (1) alkaline fuel cell (AFC), (2) direct methanol fuel cell (DMFC), (3) molten carbonate fuel cell (MCFC), (4) phosphoric acid fuel cell (PAFC), (5) proton exchange membrane fuel cell (PEMFC), and (6) the solid oxide fuel cell (SOFC). They all differ in applications, operating temperatures, cost, and efficiency. 

Proton Exchange Membrane Fuel Cells (PEMFCs) are being considered as a potential alternative energy conversion device for mobile power applications. Since the electrolyte of a PEM fuel cell can function at low temperatures (typically at 80 °C), PEMFCs are unique from the other commercially viable types of fuel cells. Moreover, the electrolyte membrane and other cell components can be manufactured very thin, allowing for high power production to be achieved within a small volume of space. Thus, the combination of small size and fast start-up makes PEMFCs an excellent candidate for use in mobile power applications, such as laptop computers, cell phones, and automobiles. 

Proton exchange membrane fuel cells (PEMFC), 72 201, 211-213 73 861-862... 

This survey focuses on recent developments in catalysts for phosphoric acid fuel cells (PAFC), proton-exchange membrane fuel cells (PEMFC), and the direct methanol fuel cell (DMFC). In PAFC, operating at 160-220°C, orthophosphoric acid is used as the electrolyte, the anode catalyst is Pt and the cathode can be a bimetallic system like Pt/Cr/Co. For this purpose, a bimetallic colloidal precursor of the composition Pt50Co30Cr20 (size 3.8 nm) was prepared by the co-reduction of the corresponding metal salts [184-186], From XRD analysis, the bimetallic particles were found alloyed in an ordered fct-structure. The elecbocatalytic performance in a standard half-cell was compared with an industrial standard catalyst (bimetallic crystallites of 5.7 nm size) manufactured by co-precipitation and subsequent annealing to 900°C. The advantage of the bimetallic colloid catalysts lies in its improved durability, which is essential for PAFC applicabons. After 22 h it was found that the potential had decayed by less than 10 mV [187],... 

Would the preferential CO oxidation reaction be needed if the proton-exchange membrane fuel cell (PEMFC) with Pt anode catalyst were able to work at temperatures higher than about 403 K ... 

All fuel cells for use in vehicles are based on proton-exchange-membrane fuel cell (PEMFC) technology. The methanol fuel-processor fuel cell (FPFC) vehicle comprises an on-board fuel processor with downstream PEMFC. On-board methanol reforming was a development focus of industry for a number of years until around 2002. Direct-methanol fuel cells (DMFC) are no longer considered for the propulsion of commercial vehicles in the industry (see also Chapter 13). 

Fig. 14.12 Principle of a proton exchange membrane fuel cell (PEMFC).

Gamburzev, S., and Appleby, A. J. Recent progress in performance improvement of the proton exchange membrane fuel cell (PEMFC). Journal of Power Sources 2002 107 5-12. 

Because of its lower temperature and special polymer electrolyte membrane, the proton exchange membrane fuel cell (PEMFC) is well-suited for transportation, portable, and micro fuel cell applications. But the performance of these fuel cells critically depends on the materials used for the various cell components. Durability, water management, and reducing catalyst poisoning are important factors when selecting PEMFC materials. 

Proton exchange membrane fuel cells (PEMFCs) work with a polymer electrolyte in the form of a thin, permeable sheet. The PEMFCs, otherwise known as polymer electrolyte fuel cells (PEFC), are of particular importance for the use in mobile and small/medium-sized stationary applications (Pehnt, 2001). The PEM fuel cells are considered to be the most promising fuel cell for power generation (Kazim, 2000). 

Obviously, in practical situations one can hardly imagine a vacuum pump installed onboard of a fuel cell-powered vehicle. Even if so, the membrane of a Proton Exchange Membrane Fuel Cell (PEMFC) will be soon contaminated by the oil vapors released from the pump (dry pumps are possible but this would enormously complicate the entire design). 

Figure 29. Conductivity of some intermediate-temperature proton conductors, compared to the conductivity of Nafion and the oxide ion conductivity of YSZ (yttria-stabilized zirconia), the standard electrolyte materials for low- and high-temperature fuel cells, proton exchange membrane fuel cells (PEMFCs), and solid oxide fuel cells (SOFCs).

After rehearsing the working principles and presenting the different kinds of fuel cells, the proton exchange membrane fuel cell (PEMFC), which can operate from ambient temperature to 70-80 °C, and the direct ethanol fuel cell (DEFC), which has to work at higher temperatures (up to 120-150 °C) to improve its electric performance, will be particularly discussed. Finally, the solid alkaline membrane fuel cell (SAMFC) will be presented in more detail, including the electrochemical reactions involved. 

Proton exchange membrane fuel cell (PEMFC) working at around 70 °C with a polymer membrane electrolyte, such as Nafion, which is a solid proton conductor (conducting by the H + cation). 

Other metals, the performances of which as cathodes in the electroreduction of C02 have already been described in detail, were suggested for the development stage. Thus, Delacourt et al. [87] proposed an electrochemical cell, the design of which was taken from proton exchange membrane fuel cell (PEMFC) technology,... 

Proper water management in proton exchange membrane fuel cells (PEMFCs) is critical to PEMFC performance and durability. PEMFC performance is impaired if the membrane has insufficient water for proton conduction or if the open pore space of the gas diffusion layer (GDL) and catalyst layer (CL) or the gas flow channels becomes saturated with liquid water, there is a reduction in reactant flow to the active catalyst sites. PEMFC durability is reduced if water is left in the CL during freeze/thaw cycling which can result in CL or GDL separation from the membrane,1 and excess water in contact with the membrane can result in accelerated membrane thinning.2... 

---