High-temperature proton exchange membrane fuel cell

Song, Y, Wei, Y, Xu, H., Williams, M., Liu, Y., Bonville, L. J., Kunz, H. R., and Fenton, J. M. Improvement in high-temperature proton exchange membrane fuel cells cathode performance with ammonium carbonate. Journal of Power Sources 2005 141 250-257. [Pg.105]

Figure 9.12 depicts the profiles of feed-side H2 concentrations on the dry and wet bases. As depicted in this figure, the membrane reactor could enhance H2 concentration from 45.30% to 54.95% (on dry basis), that is, from 41% to 49.32% (on wet basis). In this case, the H2 recovery calculated from the model was 97.38%. With the advancement of the high-temperature proton exchange membrane fuel cell (120-160 °C), it is expected that the constraint of CO concentration can be relaxed to about 50 ppm in the near future. Then, the required hollow-fiber number could be reduced significantly to 39,000 based on the modeling results. [Pg.400]

Das SK, Reis A, Berry KJ (2009) Experimental evaluation of CO poisoning on the performance of a high temperature proton exchange membrane fuel cells. J Power Sources 193 691-698... [Pg.100]

L. Paturzo, A. Basile, A. lulianelh, J. C. Jansen, I. Gatto, and E. Passalacqua. High temperature proton exchange membrane fuel cell using a sulfonated membrane obtained via H2SO4 heatment of PEEK-WC. Catal. Today, 104 (2-4) 213-218, June 2005. [Pg.236]

Bose S, Kuila T, Thi XLN, Kim NH, Lau KT, Lee JH (2011) Polymer membranes for high temperature proton exchange membrane fuel cell recent advances and challenges. Prog Polym... [Pg.98]

He R, Li Q, Jensen JO, Bjerrum NJ (2007) Eloping phosphoric acid in polybenzimidazole membranes for high temperature proton exchange membrane fuel cell. J Polym Sci Pol Chem... [Pg.225]

So SY, Yoon YJ, Kim TH, Yoon K, Hong YT. Sulfonated poly(arylene ether sulfone)/functionalized silicate hybrid proton conductors for high-temperature proton exchange membrane fuel cells. J Membr Sci 2011 381(l-2) 204-10. [Pg.206]

C.H. Shen, S.L.C. Hsu, Synthesis of novel cross-linked polybenzimidazole membranes for high temperature proton exchange membrane fuel cells, J. Membr. Sci. 443 (1) (2013) 138-143. [Pg.266]

Jiao, K. and Li, X. (2010) A three-dimensional non-isothermal model of high temperature proton exchange membrane fuel cells with phosphoric acid doped polybenzimidazole membranes. Fuel Cells, 10, 351. [Pg.836]

Puffer RH Jr, Rock SJ (2009) Recent advances in high temperature proton exchange membrane fuel cell manufacturing. J Fuel Cell Sci Technol 6(4) 041013/l-041013/7... [Pg.430]

Liao J, Li QF, Rudbeck HC et al (2011) Oxidative degradation of polybenzimidazole membranes as electrolytes for high temperature proton exchange membrane fuel cells. Fuel Cells 11 745-755... [Pg.88]

Aili D, Li Q, Christensen E et al (2011) Crosslinking of polybenzimidazole membranes by divinylsulfone post-treatment for high-temperature proton exchange membrane fuel cell applications. Polym Int 60 1201-1207... [Pg.88]

Noye P, Li QF, Pan C et al (2008) Cross-linked polybenzimidazole membranes for high temperature proton exchange membrane fuel cells with dichloromethyl phosphoric acid as a cross-linker. Polym Adv Technol 19 1270-1275... [Pg.88]

Li J, Li X, Zhao Y et al (2012) High-temperature proton-exchange-membrane fuel cells using an ether-containing polybenzimidazole membrane as electrolyte. ChemSusChem 5 896-900... [Pg.165]

Su H, Pasupathi S, Bladergoen B et al (2013) Optimization of gas diffusion electrodes for polybenzimidazole-based high temperature proton exchange membrane fuel cell evaluation of polymer binders in catalyst layer. Int J Hydrogen Energy 38 11370-11378... [Pg.272]

Matar S, Higer A, Liu H (2010) The effects of excess phosphoric acid in a polybenzimidazole-based high temperature proton exchange membrane fuel cell. J Power Sources 195 12-15... [Pg.274]

Wang S, Zhao C, Ma W et al (2013) Silane-cross-linked polybenzimidazole with improved conductivity for high temperature proton exchange membrane fuel cells. J Mater Chem A 1 621-629... [Pg.293]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...