Petroleum Gas LPG

Liquefied petroleum gas is primarily propane but generally also contains significant amounts of olefins, which increase its reactivity substantially (Table 16.14). For example, LPG in the Los Angeles area contains about 2 mol% of alkenes whereas that in Mexico City contains almost 5% (Blake and Rowland, 1995). Hence while it is a significant improvement over gasoline in terms of reactivity (Tables 16.10 and 16.11), the exact amount of improvement is highly dependent on the nature and concentrations of these reactive impurities (Gabele, 1995). 

---

Calor gas, Calor propane The trade name for a liquified petroleum gas (LPG) sold in cylinders for domestic and industrial healing. Calor gas is the name used for commercial butane while commercial propane is sold as Calor propane. 

The market value of natural gas Hquids is highly volatile and historically has been weakly related to the world price of cmde oil. During the 1980s, the market value of natural gas Hquids ranged from approximately 60% of the price of cmde to 73% (12). In this 10-year interval, several fluctuations occurred in the natural gas Hquid market. Because of the variabiHty of the natural gas Hquid market, the NGL recovery plants need to have flexibiHty. Natural gas Hquid products compete in the following markets ethane propane a Hquefted petroleum gas (LPG) a C-3/C-4 mix and / -butane all compete as petrochemical feedstocks. Propane and LPG are also used as industrial and domestic fuels, whereas 2-butane and natural gasoline, consisting of C-5 and heavier hydrocarbons, are used as refinery feedstocks. 

Alternative fuels fall into two general categories. The first class consists of fuels that are made from sources other than cmde oil but that have properties the same as or similar to conventional motor fuels. In this category are fuels made from coal and shale (see Fuels, synthetic). In the second category are fuels that are different from gasoline and diesel fuel and which require redesigned or modified engines. These include methanol (see Alcohol fuels), compressed natural gas (CNG), and Hquefted petroleum gas (LPG). 

Condensable hydrocarbons are removed from natural gas by cooling the gas to a low temperature and then by washing it with a cold hydrocarbon hquid to absorb the condensables. The uncondensed gas (mainly methane with a small amount of ethane) is classified as natural gas. The condensable hydrocarbons (ethane and heavier hydrocarbons) are stripped from the solvent and are separated into two streams. The heavier stream, which largely contains propane with some ethane and butane, can be Hquefied and is marketed as Hquefied petroleum gas (LPG) (qv). The heavier fractions, which consist of and heavier hydrocarbons, are added to gasoline to control volatihty (see Gasoline and other motor fuels). 

In 1987 nonmotor fuel uses of butanes represented ca 16% of the total consumption. Liquid petroleum gas (LPG) is a mixture of butane and propane, typically in a ratio of 60 40 butane—propane however, the butane content can vary from 100 to 50% and less (see Liquefied petroleum gas). LPG is consumed as fuel in engines and in home, commercial, and industrial appHcations. Increasing amounts of LPG and butanes are used as feedstocks for substitute natural gas (SNG) plants (see Fuels, synthetic). / -Butane, propane, and isobutane are used alone or in mixture as hydrocarbon propellents in aerosols (qv). 

Liquefied petroleum gas (LPG) is a subcategory of a versatile class of petroleum products known as natural gas liquids (NGLs) that are produced along with and extracted from natural gas (see Gas, natural). LPG is also produced from the refining of cmde oil (see Petroleum). Although LPG is... 

Liquefied Petroleum Gas (LPG). Certain specific hydrocarbons, such as propane, butane, pentane, and their mixtures, exist in the gaseous state under atmospheric ambient conditions but can be converted to the Hquid state under conditions of moderate pressure at ambient temperature. This is termed Hquefied petroleum gas (LPG). Liquefied petroleum gas (qv) is a refinery product and the individual constituents, or light ends (Table 4), are produced during a variety of refining operations. 

The distillation system is designed to recover a high purity cumene product. The unconverted benzene and polyisopropylbenzenes are separated and recycled to the reaction system. Propane ia the propyleae feed is recovered as fiquid petroleum gas (LPG). 

Fuel. Propylene has a net heating value of 45.8 MJ/kg (19,700 Btu/lb) and is often contained in refinery fuel-gas streams. However, propylene is diverted from streams for refinery fuel use in large quantities only when economics for other uses are unfavorable, or equipment for propylene recovery does not exist or is limited in capacity. Propylene is also contained in Hquid petroleum gas (LPG), but is limited to a maximum concentration of 5 vol % in certain grades (83) (see Liquefied PETROLEUM gas). 

Storage and Transportation. Handling requirements are similar to Hquefied petroleum gas (LPG). Storage conditions are much milder. Butylenes are stored as Hquids at temperatures ranging from 0 to 40°C and at pressures from 100 to 400 kPa (1—4 atm). These conditions are much lower than those required for LPG. Their transportation is also similar to LPG they are shipped in tank cars, transported in pipelines, or barged. 

Liquefied petroleum gas (LPG) is the subject of API Standard 2510, The Design and Construction of Liquefied Petroleum Gas Installations at Marine and Pipehne Terminals, Natural Gas Processing Plants, Refineries, and Tank Farms. This standard in turn refers to ... 

Forklift Trucks The backbone of most in-plant handhng systems in the chemical industry is the forklift truck. Available in capacities ranging from 1 to 50 tons, the most commonly used are 1-, 1.5-, and 2-ton vehicles, with the 3-ton unit occasionally being used (Fig. 21-54). The trucks are usually powered by internal-coiTibustion engines that consume liquefied petroleum gas (LPG) or by electricity by means of storage Batteries. 

Liquefied Petroleum Gas The term liquefied petroleum gas (LPG) is applied to certain specific hydrocarbons which can be liquefied under moderate pressure at normal temperatures but are gaseous under normal atmospheric conditions. The chief constituents of LPG are propane, propylene, butane, butylene, and isobutane. LPG produced in the separation of heavier hydrocarbons from natural gas is mainly of the paraffinic (saturated) series. LPG derived from oil-refinery gas may contain varying low amounts of olefinic (unsaturated) hydrocamons. 

API Publ 2510A, Fire Protection Considerations for the Design and Operation of Liquefied Petroleum Gas (LPG) Storage Facilities, 2nd ed., December 1996... 

Fuel modification in terms of volatility, hydrocarbon types, or additive content. Some of the fuels currently being used are liquefied petroleum gas (LPG), liquefied natural gas (LNG), compressed natural gas (CNG), fuels with alcohol additives, and unleaded gasoline. The supply of some of these fuels is very limited. Other fuel problems involving storage, distribution, and power requirements have to be considered. 

The sale of C, as liquefied petroleum gas (LPG) is a profitable outlet for this material. However, LPG has to meet rigid specifications on low moisture content, low sulfur, and usually a minimum of 95% C3 content, with the... 

Absorption recovers valuable light components such as propane/propylene and butane/ butylene as vapors from fractionating columns. These vapors are bubbled through an absorption fluid, such as kerosene or heavy naphtha, in a fractionating-like column to dissolve in the oil while gases, such as hydrogen, methane, ethane, and ethylene, pass through. Absorption is effectively performed at 100 to 150 psi with absorber heated and distilled. The gas fraction is condensed as liquefied petroleum gas (LPG). The liquid fraction is reused in the absorption tower. 

Liquefied petroleum gas (LPG) Paraffin hydrocarbon gases comprising propane, butane, and pentanes derived from natural gas wells and from the petroleum refining process that remain as liquids when stored under pressure in tanks and bottles. 

The first step in a gas processing plant is to separate the components that are to be recovered from the gas into an NGL stream. It may then be desirable to fractionate the NGL stream into various liquefied petroleum gas (LPG) components of ethane, propane, iso-butane, or normal-butane. The LPG products are defined by their vapor pressure and must meet certain criteria as shown in Table 9-1. The unfractionated natural gas liquids product (NGL) is defined by the properties in Table 9-2. NGL is made up principally of pentanes and heavier hydrocarbons although it may contain some butanes and very small amounts of propane. It cannot contain heavy components that boil at more than 375°F. 

The valve was the drain valve on a small tank containing liquefied petroleum gas (LPG). The 5 tons of LPG that were in the tank escaped over two to three hours but fortunately did not catch fire. However, 2,000 people who lived near the plant were evacuated from their homes [11]. 

The term liquefied petroleum gas (LPG) is often used to describe those liquefied flammable gases that are derived from petroleum. The term LFG is preferred when the discussion applies to all liquefied flammable gases. It includes materials such as ethylene oxide, vinyl chloride, and methylamines, which behave similarly so far as their flashing and flammable properties are concerned. 

Liquefied petroleum gas (LPG) was involved in 17% of the incidents (see Chapter 8), followed by heavy oils (see Section 12.4), gasoline, hydrogen, and hydrocarbon gases. Heavy oils are involved in so many incidents because they are often handled above their auto-ignition temperature and because they are involved in foamovers. 

---