Light components

Production of ion-exchange resins, heat-and impact-resistant copolymer, ABS, resins, etc. foams, toys, plastic optical components, lighting Fixtures, housewares, packaging, home furnishings... [Pg.175]

LED component [LIGHT GENERATION - LIGHT-EMITTING DIODES] (Vol 15)... [Pg.36]

Reference DOM component Light source Measure Measured effect... [Pg.254]

Unlike oil, natural gas and its main components—light (C1-C4) alkanes— are much more abundant. The existing estimates of their assured resources in traditional gas fields are much more optimistic as compared to oil resources. Moreover, the Earth s mantle permanently releases additional amounts of methane, and its resources in the form of gas hydrates are estimated as more than a half of the organic carbon in the Earth s crust (Kvenvolden, 1988). The development of these giant resources becomes the strategic goal of the world economy and accordingly one of the priority directions in scientific research— both fundamental and applied (Melvin, 1988). [Pg.169]

For a few fluids (water, air components, light hydrocarbons, common refrigerants), extensive viscosity data exist and have been fitted to comprehensive equations. These reference-quality correlations are available in the pure-fluid property databases mentioned in Section 1.2.4. [Pg.16]

Description/Component Light mixture Fine mbcture... [Pg.909]

The optical components (light source, detector and light losses in and the quality of the optical fibers), as well as on the physical changes occurring on the surface of the reflecting material in the flow cell. [Pg.378]

Heat Tracing Components Cathodic Protection Components Lighting Protection Equipment... [Pg.138]

Primary Fluid Component Light Hydrocarbon Liquid... [Pg.820]

Components/ Light-activated Monomeric (2-octyl Bovine albumin cross-linked... [Pg.1107]

FIGURE 8,5. For an ideal mixture, the surface tension wiU be a linear function of the composition of the mixture and the surface tension of the pure components (light lines). In practice, most mixtures show significant deviation from ideality (bold fines). [Pg.148]

The way the rubber feeds into the screw has a significant influence on product quality. Designs that allow the rubber to be cut off in the feed zone (throat) by the screw flight cause extra work for the operator, and will give rise to an increase in screw speed as the starved screw empties itself of rubber. This results in a rapid build-up of scorched material in the unit and, if it is not immediately detected and corrected, there will be insufficient rubber in the components ( light parts ). A number of design features may be adopted to overcome rubber strip feed problems. Three solutions are regularly adopted, either alone or in combination ... [Pg.29]

Time saving (this can be ascribed to their high strength to weight ratio which makes the components light and reduces the related construction and assembly time)... [Pg.73]

Natural gas and LPG are interesting feedstocks for petrochemical processes since their components (light alkanes as methane, ethane, propane, and butanes) could be alternative raw materials in well-known industrial processes. [Pg.814]

Knee bolster components Light covers Parking brake fittings Rear shelves... [Pg.606]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...