Mass laser ionization

Laser based mass spectrometric methods, such as laser ionization (LIMS) and laser ablation in combination with inductively coupled plasma mass spectrometry (LA-ICP-MS) are powerful analytical techniques for survey analysis of solid substances. To realize the analytical performances methods for the direct trace analysis of synthetic and natural crystals modification of a traditional analytical technique was necessary and suitable standard reference materials (SRM) were required. Recent developments allowed extending the range of analytical applications of LIMS and LA-ICP-MS will be presented and discussed. For example ... 

In Surface Analysis by Laser Ionization (SALI), a probe beam such as an ion beam, electron beam, or laser is directed onto a surfiice to remove a sample of material. An untuned, high-intensity laser beam passes parallel and close to but above the sur-fiice. The laser has sufficient intensity to induce a high degree of nonresonant, and hence nonselective, photoionization of the vaporized sample of material within the laser beam. The nonselectively ionized sample is then subjected to mass spectral analysis to determine the nature of the unknown species. SALI spectra accurately reflect the surface composition, and the use of time-of-flight mass spectrometers provides fast, efficient and extremely sensitive analysis. 

In Laser Ionization Mass Spectrometry (LIMS, also LAMMA, LAMMS, and LIMA), a vacuum-compatible solid sample is irradiated with short pulses ("10 ns) of ultraviolet laser light. The laser pulse vaporizes a microvolume of material, and a fraction of the vaporized species are ionized and accelerated into a time-of-flight mass spectrometer which measures the signal intensity of the mass-separated ions. The instrument acquires a complete mass spectrum, typically covering the range 0— 250 atomic mass units (amu), with each laser pulse. A survey analysis of the material is performed in this way. The relative intensities of the signals can be converted to concentrations with the use of appropriate standards, and quantitative or semi-quantitative analyses are possible with the use of such standards. 

A somewhat related technique is that of laser ionization mass spectrometry (LIMS), also known as LIMA and LAMMA, where a single pulsed laser beam ablates material and simultaneously causes some ionization, analogous to samples beyond the outer surface and therefore is more of a bulk analysis technique it also has severe quantiBaction problems, often even more extreme than for SIMS. 

Laser ionization mass spectrometry or laser microprobing (LIMS) is a microanalyt-ical technique used to rapidly characterize the elemental and, sometimes, molecular composition of materials. It is based on the ability of short high-power laser pulses (-10 ns) to produce ions from solids. The ions formed in these brief pulses are analyzed using a time-of-flight mass spectrometer. The quasi-simultaneous collection of all ion masses allows the survey analysis of unknown materials. The main applications of LIMS are in failure analysis, where chemical differences between a contaminated sample and a control need to be rapidly assessed. The ability to focus the laser beam to a diameter of approximately 1 mm permits the application of this technique to the characterization of small features, for example, in integrated circuits. The LIMS detection limits for many elements are close to 10 at/cm, which makes this technique considerably more sensitive than other survey microan-alytical techniques, such as Auger Electron Spectroscopy (AES) or Electron Probe Microanalysis (EPMA). Additionally, LIMS can be used to analyze insulating sam-... 

Laser Ionization Mass Spectrometry Laser Microprobe Mass Analysis Laser Microprobe Mass Spectrometry Laser Ionization Mass Analysis Nonresonant Multi-Photon Ionization... 

Surface Analysis by Laser Ionization Post-Ionization Secondary Ion Mass Spectrometry Multi-Photon Nonresonant Post Ionization Multiphoton Resonant Post Ionization Resonant Post Ionization Multi-Photon Ionization Single-Photon Ionization... 

Vol. 124. Laser Ionization Mass Analysis. Edited by Akos Vertes, Renaat Gijbels, and Fred Adams... 

The general principle of detection of free radicals is based on the spectroscopy (absorption and emission) and mass spectrometry (ionization) or combination of both. An early review has summarized various techniques to detect small free radicals, particularly diatomic and triatomic species.68 Essentially, the spectroscopy of free radicals provides basic knowledge for the detection of radicals, and the spectroscopy of numerous free radicals has been well characterized (see recent reviews2-4). Two experimental techniques are most popular for spectroscopy studies and thus for detection of radicals laser-induced fluorescence (LIF) and resonance-enhanced multiphoton ionization (REMPI). In the photochemistry studies of free radicals, the intense, tunable and narrow-bandwidth lasers are essential for both the detection (via spectroscopy and photoionization) and the photodissociation of free radicals. 

Statistical Methods in Analytical Chemistry. By Peter C. Meier and Richard Zud Laser Ionization Mass Analysis. Edited by Akos Vertes, Renaat Gijbels, and Fred Adams Physics and Chemistry of Solid State Sensor Devices. By Andreas Mandelis and Constantinos Christofides... 

Vertes, A. Gijbels, R. Adams, F. Laser Ionization Mass Analysis. New York Wiley, 1993. 

K. Tanaka, H. Waki, Y. Ido, S. Akita, Y. Yoshida, T. Yoshida and T. Matsuo, Protein and polymer analyses up to m/z 100 000 by laser ionization time of flight mass spectrometry, Rapid Commun. Mass Spectrom., 2, 151 153 (1988). 

Mass spectrometry requires that the material being studied be converted into a vapor. Great strides have been taken in recent years to address this problem, especially in enticing large, thermally fragile (bio)molecules into the vapor state. Matrix assisted laser ionization-desorption (MALDI) and electrospray ionization (ESI) are two current forefront methods that accomplish this task. Even components of bacteria and intact viruses are being examined with these approaches. John B. Fenn and Koichi Tanaka shared in the award of a Nobel Prize in 2002 for their respective contributions to development of electrospray ionization and soft laser desorption. 

Mass spectrometric measurements of ions desorbed/ionized from a surface by a laser beam was first performed in 1963 by Honig and Woolston [151], who utilized a pulsed mby laser with 50 p,s pulse length. Hillenkamp et al. used microscope optics to focus the laser beam diameter to 0.5 p,m [152], allowing for surface analysis with high spatial resolution. In 1978 Posthumus et al. [153] demonstrated that laser desorption /ionization (LDI, also commonly referred to as laser ionization or laser ablation) could produce spectra of nonvolatile compounds with mass > 1 kDa. For a detailed review of the early development of LDI, see Reference 154. There is no principal difference between an LDI source and a MALDI source, which is described in detail in Section 2.1.22 In LDI no particular sample preparation is required (contrary to... 

A laser pulse can ablate material from the surface of a sample, and create a microplasma which ionizes some of the sample components. The laser pulse accomplishes both vaporization and ionization of the sample [366,534,535]. This method is called laser ionization mass spectrometry (LIMS). 

FIGURE 11.69 Schematic diagram of single-particle laser ionization mass spectrometer (adapted from Gard et at., 1997). 

FIGURE 11.71 Typical laser ionization positive ion mass spectra of single particles in rural Colorado (adapted from Murphy and Thomson, f997a,b). 

---