Hydrocarbons polynuclear aromatics

In summary, examples of the successful use of silica gel as a conventional stationary phase are in the analysis of mixtures containing polarizable and relatively low polarity solutes typified by mixtures of aromatic hydrocarbons, polynuclear aromatics, nitro compounds, carotenes and vitamin A formulas. 

M. LeBreton, P. R. in "Proceedings of the Ninth International Symposium on Polynuclear Aromatic Hydrocarbons, Polynuclear Aromatic Hydrocarbons Chemistry, Characterization and... 

N-nitrosothiazolidine-4-carboxylie acid N-nitrosothiazolidine polynuclear aromatic hydrocarbons polynuclear aromatic compounds peroxy acetyl nitrate... 

The petroleum-based oils contain hundreds to thousands of hydrocarbon compounds, including a substantial fraction of nitrogen- and sulfur-containing compounds. The hydrocarbons are mainly mixtures of snaight- and branched-chain hydrocarbons (alkanes), cycloalkanes, and aromatic hydrocarbons. Polynuclear aromatic hydrocarbons, alkyl polynuclear aromatic hydrocarbons, and metals are important components of motor oils and crankcase oils, with the used oils... 

Pentagone is an aqueous-based surface decontamination product developed for the cleanup of pentachlorophenols, creosote, petroleum hydrocarbons, chlorinated hydrocarbons, polynuclear aromatic hydrocarbons, and selected pesticide and herbicide spills. It can be used on concrete, asphalt, or metal and is capable of being applied as a foam, allowing treatment of overhead, vertical, and horizontal surfaces. It has been commercially available since 1993 and has been used in multiple applications. 

The complexity of the immune system renders it readily attacked by many chemicals. Such attack may result, for example, in organ damage in the thymus, bone, and lymph nodes as well as in cellular pathology in immunocompetent cells. More than 350 different compounds have been identified as immunotoxinsJ5 6 Table 25.1 contains a representative list of these. This list includes heavy metals, chlorinated and organophosphorus pesticides, aromatic hydrocarbons, polynuclear aromatic hydrocarbons, organic solvents, and many widely used chemicals. Many lipophilic and hydrophilic chemicals are immunotoxins and the immunotoxicity of these compounds is manifest via multiple mechanisms. 

Polydimethyl siloxane OV-1, SE-30 350 General-purpose nonpolar phase, hydrocarbons, polynuclear aromatics, steroids, PCBs... 

Basic general-purpose phase for routine use. Hydrocarbons, polynuclear aromatics, PCBs. 

The solubility of hydrocarbon liquids from the same chemical family diminishes as the molecular weight increases. This effect is particularly sensitive thus in the paraffin series, the solubility expressed in mole fraction is divided by a factor of about five when the number of carbon atoms is increased by one. The result is that heavy paraffin solubilities are extremely small. The polynuclear aromatics have high solubilities in water which makes it difficult to eliminate them by steam stripping. 

Outside of carbon monoxide for which the toxicity is already well-known, five types of organic chemical compounds capable of being emitted by vehicles will be the focus of our particular attention these are benzene, 1-3 butadiene, formaldehyde, acetaldehyde and polynuclear aromatic hydrocarbons, PNA, taken as a whole. Among the latter, two, like benzo [a] pyrene, are viewed as carcinogens. Benzene is considered here not as a motor fuel component emitted by evaporation, but because of its presence in exhaust gas (see Figure 5.25). 

The purpose of this eornpuLer project is Lo examine several polynuclear aromatic hydrocarbons and to relate their electron density patterns to their carcinogenic activity. If nucleophilic binding to DN.A is a significant step in blocking the normal transcription process of DN.A, electron density in the hydrocarbon should be positively correlated to its carcinogenic potency. To begin with, we shall rely on clinical evidence that benzene, naphthalene, and phenanthrene... 

Troost and Olavesen investigated the application of an internal standardization to the quantitative analysis of polynuclear aromatic hydrocarbons. The following results were obtained for the analysis of the analyte phenanthrene using isotopically labeled phenanthrene as an internal standard... 

Methanol use would also reduce pubHc exposure to toxic hydrocarbons associated with gasoline and diesel fuel, including ben2ene, 1,3-butadiene, diesel particulates, and polynuclear aromatic hydrocarbons. Although pubHc formaldehyde exposures might increase from methanol use in garages and tunnels, methanol use is expected to reduce overall pubHc exposure to toxic air contaminants. 

M. Castegnaro, M. Coombs, M. A. PhiUipson, M. C. Bourgade, andj. Michelon, the 7th Polynuclear Aromatic Hydrocarbons, International Symposium, BateUe Press, Columbus, Ohio, 1982, pp. 257—268. 

The endoperoxides of polynuclear aromatic compounds are crystalline soHds that extmde singlet oxygen when heated, thus forming the patent aromatic hydrocarbon (44,66,80,81). Thus 9,10-diphenyl-9,10-epidioxyanthrancene [15257-17-7] yields singlet oxygen and 9,10-diphenylanthracene. 

The fused 3+ ring aromatics in petroleum include both cata- and peri-condensed stmctures (see Table 4, Fig. 8). The cata-condensed species are those stmctures where only one face is shared between rings, the peri-condensed molecules are those that share more than one face. The fused ring aromatics form the class of compounds known as polynuclear aromatic hydrocarbons (PAH) which includes a number of recognized carcinogens in the 4+ ring family (33). Because of the potential health and environmental impact of PAH, these compounds have been studied extensively in petroleum. 

Table 4. Fused-Ring Polynuclear Aromatic Hydrocarbons Found in Petroleum ...

Fig. 8. Stmctures of fused-ring polynuclear aromatic hydrocarbons. See Table 4.

Rubbers. Plasticizers have been used in mbber processing and formulations for many years (8), although phthaHc and adipic esters have found Htde use since cheaper alternatives, eg, heavy petroleum oils, coal tars, and other predominandy hydrocarbon products, are available for many types of mbber. Esters, eg, DOA, DOP, and DOS, can be used with latex mbber to produce large reductions in T. It has been noted (9) that the more polar elastomers such as nitrile mbber and chloroprene are insufficiendy compatible with hydrocarbons and requite a more specialized type of plasticizer, eg, a phthalate or adipate ester. Approximately 50% of nitrile mbber used in Western Europe is plasticized at 10—15 phr (a total of 5000—6000 t/yr), and 25% of chloroprene at ca 10 phr (ca 2000 t/yr) is plasticized. Usage in other elastomers is very low although may increase due to toxicological concerns over polynuclear aromatic compounds (9). 

Cancerous skin lesions of workers exposed to pitch dust undoubtedly support the behef that these lesions are caused by polynuclear aromatic hydrocarbons, although it had not been possible to demonstrate their carcinogenic action in animals more closely related to humans, such as monkeys. 

Aerobic, Anaerobic, and Combined Systems. The vast majority of in situ bioremediations ate conducted under aerobic conditions because most organics can be degraded aerobically and more rapidly than under anaerobic conditions. Some synthetic chemicals are highly resistant to aerobic biodegradation, such as highly oxidized, chlorinated hydrocarbons and polynuclear aromatic hydrocarbons (PAHs). Examples of such compounds are tetrachloroethylene, TCE, benzo(a)pyrene [50-32-8] PCBs, and pesticides. 

Feedstocks. Feedstocks are viscous aromatic hydrocarbons consisting of branched polynuclear aromatics with smaller quantities of paraffins and unsaturates. Preferred feedstocks are high in aromaticity, free of coke and other gritty materials, and contain low concentrations of asphaltenes, sulfur, and alkah metals. Other limitations are the quantities available on a long-term basis, uniformity, ease of transportation, and cost. The abiUty to handle such oils in tanks, pumps, transfer lines, and spray nozzles are also primary requirements. 

Benzene monoxide-oxepin and its sulfur analog are treated elsewhere (Chapter 5.1.7) (67AG(E)385). However, we point out here that electron-withdrawing substituents often favor the benzene oxide tautomer. The first study on oxides of the environmentally hazardous polychloro- and polybromo-biphenyls shows that they exist mainly in the benzene oxide form (81JOC3721). Oxides of polynuclear aromatic hydrocarbons (PAH) also exist mainly in the fused-ring oxirane form. 

---