Special Types

Here we consider common types of catalysts not included in previous descriptions. 

In cases where intimate interaction is not necessary and where no synergistic effects exist, mechanical mixing of two oxides (or other components) may be all that is necessary. This is accomplished by mulling with suitable mechanical devices. Early methanol catalysts, such as ZnO-ZnCu204, were prepared in this manner. 

When mechanical strength and thermal stability are paramount, as in steam reforming, this is accomplished by cementing components together with some type of ceramic cement, such as calcium aluminate. Early steam refonning catalysts were of this type. 

Platinum and silver gauze are used in ammonia and methanol oxidation to nitric oxide and formaldehyde, respectively. The gauze consists of fine wire mesh of O.Smm diameter, supported as layers within the reactor. Activation that pits the metal wire is necessary to enhance the active surface area.  

The introduction of automobile exhaust catalysts in the United States and elsewhere has produced a major market for platinum-type oxidation and reduction systems. An innovative consequence of this industry has been the development of ceramic honeycombed monoliths as catalyst supports. These structures contain long, parallel channels of less than 0.1 mm in diameter, with about SO channels per square centimeter. The monolith is composed of cordierite (2MgO - 2AI2O) SSiOj) and is manufactured by extrusion. A wash coat of stabilized alumina is administered prior to deposition of the active metal, either by adsorption or impregnation methods. 

---

The inductively coupled plasma [19] is excited by an electric field which is generated by an RF current in an inductor. The changing magnetic field of this inductor induces an electric field in which tire plasma electrons are accelerated. The helicon discharge [20] is a special type of inductively coupled RF discharge. 

A special type of tlie RF discharge is tlie silent or dielectric barrier discharge [23] which can be operated at pressures... 

Almost all chemical information systems work with tlicir own special type of connection table. They often use various formats distinguishing between internal and external connection tables. In most cases, the internal connection tables arc redundant, thus allowing maximum flexibility and increasing the speed of data processing. The external connection tables are usually non-redundant in order to save disk space. Although a connection table can be cprcsented in many different ways, the core remains the same the list of atoms and the list of bonds. Thus, the conversion of one connection table format into another is usually a fairly straightforward task. 

We shall often encotmter square matrices, which have the same number of rows and columns. A diagonal matrix is a square matrix in which all the elements are zero except for those on the diagonal. The unit or identity matrix I is a special type of diagonal matrix in which all the non-zero elements are 1 thus the 3x3 unit matrix is ... 

As the second educt (B), the plasmid ONA with complementary sticky ends is prepared separately. In the first step the isolated plasmid DNA is cut open by a special type of enzyme called restriction endonuclease. It scans along the thread of DNA and recognizes short nucleotide sequences, e.g., CTGCAG, which ate cleaved at a specific site, e.g., between A and G. Some 50 of such enzymes are known and many are commercially available. The ends are then again extended witfa he aid of a terminal transferase by a short sequence of identical nucleotides complementary to the sticky ends of educt (A). 

The most widely used and best known resistance furnaces are iadirect-heat resistance furnaces or electric resistor furnaces. They are categorized by a combination of four factors batch or continuous protective atmosphere or air atmosphere method of heat transfer and operating temperature. The primary method of heat transfer ia an electric furnace is usually a function of the operating temperature range. The three methods of heat transfer are radiation, convection, and conduction. Radiation and convection apply to all of the furnaces described. Conductive heat transfer is limited to special types of furnaces. 

Transparent ionomer coatings are appHed to glass surfaces to improve safety characteristics (39). Special types of ionomers are used as interlayers between glass sheets for appHcations requiring penetration resistance (40). 

Nondestructive Testing. Nondestmctive inspection of an explosion-welded composite is almost totally restricted to ultrasonic and visual inspection. Radiographic inspection is appHcable only to special types of composites consisting of two metals having a significant mismatch in density and a large wave pattern in the bond interface (see Nondestructive evaluation). 

Reactors. Reactors are a special type of vertical vessel. Some reactors are also in horizontal vessels but this is rare. Reference 7 covers reactors in more detail (see also Reactor technology). Reactors provide the means by which chemical reactions occur to transform feedstocks into products. 

The layout specialist should be aware of any special space requirements for a pump. Otherwise, pumps are usually fitted into a small area normally considered adequate for a general pump service. Sump pumps and other special types of appHcations need to be called out. 

Rubbers. Plasticizers have been used in mbber processing and formulations for many years (8), although phthaHc and adipic esters have found Htde use since cheaper alternatives, eg, heavy petroleum oils, coal tars, and other predominandy hydrocarbon products, are available for many types of mbber. Esters, eg, DOA, DOP, and DOS, can be used with latex mbber to produce large reductions in T. It has been noted (9) that the more polar elastomers such as nitrile mbber and chloroprene are insufficiendy compatible with hydrocarbons and requite a more specialized type of plasticizer, eg, a phthalate or adipate ester. Approximately 50% of nitrile mbber used in Western Europe is plasticized at 10—15 phr (a total of 5000—6000 t/yr), and 25% of chloroprene at ca 10 phr (ca 2000 t/yr) is plasticized. Usage in other elastomers is very low although may increase due to toxicological concerns over polynuclear aromatic compounds (9). 

In addition to photoisomerization, there are reversible photochemical reactions of special types for asymmetrical polymethines, produciag sphopyranes (84—86) as ia equation 6, where X = NR, S, or C(CH2)2-... 

Special Types. Many other coupling types are available. These vary ia degree of complexity, maintenance time, torque capabiUties, and price. A good comparison study on coupling is available (36). An elastomer-type coupling is one of the most popular types used, particularly ia the chemical iadustry. 

The pareto chart, tool number six, is a special type of histogram (48) where the frequency data is grouped in order of decreasing occurrence or other measures of importance rather than in sequential or numerical order. The chart, an example of which is shown in Figure 6, illustrates the causes in decreasing order of importance. It enables the improvement effort to be focused where it can have the most impact and is an effective management communication tool. 

Dyna.mic Viscometer. A dynamic viscometer is a special type of rotational viscometer used for characterising viscoelastic fluids. It measures elastic as weU as viscous behavior by determining the response to both steady-state and oscillatory shear. The geometry may be cone—plate, parallel plates, or concentric cylinders parallel plates have several advantages, as noted above. 

HammerMills. One of the most versatile, economical, and widely used impact mills is the hammer mill (Fig. 12). Many variations are produced, with special types available for specialized appHcations, eg, quick screen change for animal feed, heavy duty for minerals, and light constmctions for woodchip. The principle employed is similar to that of the impact cmsher however, the rotation speed can vary from 20 up to 100 m/s with high speed fine-grinding versions. The oudet screen is used to vary the residence time, which in turn affects final particle size. The size of the end product is an order of magnitude finer than the size of the perforations in the outlet screen. 

In the manufacture of explosives, sodium nitrate is used mainly in blasting agents. In slurries and emulsions, sodium nitrate improves stabiUty and sensitivity. It also improves the energy balance because sodium nitrate replaces water, so that more fuel can be added to the formulation. Sodium nitrate reduces crystal size of slurries, which in turn increases detonating speed. In dynamites sodium nitrate is used as an energy modifier. Typical content of sodium nitrate is 20—50 wt % in dynamites, 5—30 wt % in slurries, and 5—15 wt % in emulsions. Sodium nitrate is used also in permissible dynamites, a special type of dynamite for coal (qv) mining. 

A useful specialized type of analytical iastmmentation is the fibei-optic sensoi oi optiode (253,254), ia which an optical tiansducei monitois some chemically selective change. These aie often based on the fluorescence of a leagent immobilized at the distal end of the ftbei (255). 

Spent Acid or Burning. Burners for spent acid or hydrogen sulfide are generally similar to those used for elemental sulfur. There are, however, a few critical differences. Special types of nozzles are required both for H2S, a gaseous fuel, and for the corrosive and viscous spent acids. In a few cases, spent acids maybe so viscous that only a spinning cup can satisfactorily atomize them. Because combustion of H2S is highly exothermic, carehil design is necessary to avoid excessive temperatures. 

Special types of carbon black may be incorporated in latexes used for backing of carpets to enhance their conductivity. Nylon carpets backed with such conductive latex offer excellent antistatic properties even at 10% rh (110). 

The alkah metal—graphite compounds formed by graphite absorption of the fused metals Na, K, Rb, and Cs, represent a special type of metal—carbon compound (6). These intercalation compounds having formulas MCg are brown MC are gray and MC q are strongly graphitic. 

Refra.ctories, Refractory products are prepared from a wide variety of naturally occurring materials such as chromite [1308-31 -2] and magnesite [546-93-0] or from clays predominandy composed of kaolinite. Increasingly, higher purity synthetic materials are being used to obtain special properties. On the other hand, for many refractory uses, a somewhat lower fusion point than that provided by kaolinite may be adequate, so that clay materials having a moderate amount of other components as, for example, iUite, may be satisfactory. High alumina clays are also used extensively for the manufacture of special types of refractories. 

The wash primer is a special type of vinyl coating. This material contains a poly(vinyl butyral) resin, zinc chromate, and phosphoric acid in an alcohol-water solvent. The coating is so thin it is HteraUy washed onto a freshly blasted steel surface, where it passivates the metal surface by converting it to a thin iron phosphate-chromate coating. The alcohol solvent makes it possible to apply the coating over damp surfaces. The coating forms the first coat of... 

Among the polyurethane, polyester, and polyamide thermoplastic elastomers, those with polyether-based elastomer segments have better hydrolytic stabihty and low temperature flexibiUty, whereas polyester-based analogues are tougher and have the best oil resistance (43). Polycaprolactones and aUphatic polycarbonates, two special types of polyesters, are used to produce premium-grade polyurethanes (12). 

---