Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Atmospheric pressure mass spectrometry

DGE a AC AMS APCI API AP-MALDI APPI ASAP BIRD c CAD CE CF CF-FAB Cl CID cw CZE Da DAPCI DART DC DE DESI DIOS DTIMS EC ECD El ELDI EM ESI ETD eV f FAB FAIMS FD FI FT FTICR two-dimensional gel electrophoresis atto, 10 18 alternating current accelerator mass spectrometry atmospheric pressure chemical ionization atmospheric pressure ionization atmospheric pressure matrix-assisted laser desorption/ionization atmospheric pressure photoionization atmospheric-pressure solids analysis probe blackbody infrared radiative dissociation centi, 10-2 collision-activated dissociation capillary electrophoresis continuous flow continuous flow fast atom bombardment chemical ionization collision-induced dissociation continuous wave capillary zone electrophoresis dalton desorption atmospheric pressure chemical ionization direct analysis in real time direct current delayed extraction desorption electrospray ionization desorption/ionization on silicon drift tube ion mobility spectrometry electrochromatography electron capture dissociation electron ionization electrospray-assisted laser desorption/ionization electron multiplier electrospray ionization electron transfer dissociation electron volt femto, 1CT15 fast atom bombardment field asymmetric waveform ion mobility spectrometry field desorption field ionization Fourier transform Fourier transform ion cyclotron resonance... [Pg.11]

The number of detectors that are sensitive and selective enough to be applied online with LC is limited because the solvents used are not compatible, as in the case of immunochemical detection after reversed- or normal-phase LC. The technology of coupling is still under development and not yet available in a large number of laboratories not specialized in techniques such as LC-MS. Therefore, LC separations are frequently followed by offline detection. Confirmatory analysis of suspected liquid chromatographic peaks can be made possible by coupling liquid chromatography with mass spectrometry. Atmospheric-pressure chemical ionization LC-MS has been employed for the identification of six steroid hormones in bovine tissues (448). [Pg.1065]

Harris, P.G., Carter, J.F., Head, R.N., Harris, R.P., Eglinton, G., and Maxwell, J.R. (1995) Identification of chlorophyll transformation products in zooplankton faecal pellets and marine sediment extracts by liquid chromatography/mass spectrometry atmospheric pressure chemical ionization. Rapid Cornmun. Mass Spectrom. 9, 1177-1183. [Pg.592]

John Fenn is generally credited for first developing the application of electrospray ionization with mass spectrometry (Fenn et al, 1989). Electrospray ionization is an atmospheric pressure ionization technique, in contrast to MALDl, which is normally carried out in vacuo. When used for mass spectrometry, atmospheric pressure ionization involves ionization at pressure, solvent removal and charge transfer to analyte molecules, and then introduction into the mass spectrometer via some sort of ion guide system. In electrospray ionization, the liquid... [Pg.60]

See also Chemometrics and Statistics Optimization Strategies. Chromatography Overview Principies. Derivatization of Analytes. Extraction Soivent Extraction Principies Solid-Phase Extraction. Forensic Sciences Systematic Drug Identification. Gas Chromatography Mass Spectrometry. Hormones Steroids. Liquid Chromatography Liquid Chromatography-Mass Spectrometry. Mass Spectrometry Atmospheric Pressure Ionization Techniques Forensic Applications. [Pg.1655]

See also Mass Spectrometry Atmospheric Pressure Ionization Techniques Eiectrospray. [Pg.2647]

MASS SPECTROMETRY/Atmospheric Pressure Ionization Techniques... [Pg.2804]

MASS SPECTROMETRY/ Atmospheric Pressure Ionization Techniques 369... [Pg.2808]

Moini, M. in Gross, M. L. and Caprioli, R. M. (eds) (2007) The Encyclopedia of Mass Spectrometry, Atmospheric Pressure Chemical Ionization Principles, Instrumentation, and Applications,... [Pg.59]

Kinetics can also be studied at surface science conditions. Feed can be leaked at a constant rate into the chamber containing the crystal face, and the gas is removed at a constant rate by the pumps. The composition of the chamber gas can be continuously monitored by mass spectrometry. The pressure in the reaction chamber is low enough to ensure Knudsen flow The gaseous molecules collide almost exclusively with the exposed solid surfaces, and the system behaves as a perfectly mixed flow reactor (CSTR). Experiments in the transient regime with various forcing functions can be performed, and response times can be orders of magnitude smaller than those at atmospheric pressure. The catalytic oxidation of CO on Pt(llO) was one of the first studies of this type (33). [Pg.341]

Most ion-molecule techniques study reactivity at pressures below 1000 Pa however, several techniques now exist for studying reactions above this pressure range. These include time-resolved, atmospheric-pressure, mass spectrometry optical spectroscopy in a pulsed discharge ion-mobility spectrometry [108] and the turbulent flow reactor [109]. [Pg.813]

The positive column is a region in which atoms, electrons, and ions are all present together in similar numbers, and it is referred to as a plasma. Again, as with the corona discharge, in mass spectrometry, plasmas are usually operated in gases at or near atmospheric pressure. [Pg.34]

Particularly in mass spectrometry, where discharges are used to enhance or produce ions from sample materials, mostly coronas, plasmas, and arcs are used. The gas pressure is normally atmospheric, and the electrodes are arranged to give nonuniform electric fields. Usually, coronas and plasmas are struck between electrodes that are not of similar shapes, complicating any description of the discharge because the resulting electric-field gradients are not uniform between the electrodes. [Pg.38]

The various stages of this process depend critically on the type of gas, its pressure, and the configuration of the electrodes. (Their distance apart and their shapes control the size and shape of the applied electric field.) By controlling the various parameters, the discharge can be made to operate as a corona, a plasma, or an arc at atmospheric pressure. All three discharges can be used as ion sources in mass spectrometry. [Pg.43]

The advent of atmospheric-pressure ionization (API) provided a method of ionizing labile and nonvolatile substances so that they could be examined by mass spectrometry. API has become strongly linked to HPLC as a basis for ionizing the eluant on its way into the mass spectrometer, although it is also used as a stand-alone inlet for introduction of samples. API is important in thermospray, plasmaspray, and electrospray ionization (see Chapters 8 and 11). [Pg.61]

The term nebulizer is used generally as a description for any spraying device, such as the hair spray mentioned above. It is normally applied to any means of forming an aerosol spray in which a volume of liquid is broken into a mist of vapor and small droplets and possibly even solid matter. There is a variety of nebulizer designs for transporting a solution of analyte in droplet form to a plasma torch in ICP/MS and to the inlet/ionization sources used in electrospray and mass spectrometry (ES/MS) and atmospheric-pressure chemical ionization and mass spectrometry (APCI/MS). [Pg.138]

When mass spectrometry was first used as a routine analytical tool, El was the only commercial ion source. As needs have increased, more ionization methods have appeared. Many different types of ionization source have been described, and several of these have been produced commercially. The present situation is such that there is now only a limited range of ion sources. For vacuum ion sources, El is still widely used, frequently in conjunction with Cl. For atmospheric pressure ion sources, the most frequently used are ES, APCI, MALDI (lasers), and plasma torches. [Pg.282]

Thus, either the emitted light or the ions formed can be used to examine samples. For example, the mass spectrometric ionization technique of atmospheric-pressure chemical ionization (APCI) utilizes a corona discharge to enhance the number of ions formed. Carbon arc discharges have been used to generate ions of otherwise analytically intractable inorganic substances, with the ions being examined by mass spectrometry. [Pg.388]

A liquid chromatography-mass spectrometry (LC-MS) method that can quantitatively analyze urinar y normal and modified nucleosides in less than 30 min with a good resolution and sufficient sensitivity has been developed. Nineteen kinds of normal and modified nucleosides were determined in urine samples from 10 healthy persons and 18 breast cancer patients. Compounds were separ ated on a reverse phase Kromasil C18 column (2.1 mm I.D.) by isocratic elution mode using 20 mg/1 ammonium acetate - acetonitrile (97 3 % v/v) at 200 p.l/min. A higher sensitivity was obtained in positive atmospheric pressure chemical ionization mode APCI(-i-). [Pg.351]

An on-line chromatography/atmospheric pressure chemical ionization tandem mass spectrometry (LC-APCI/MS/MS) methods was developed for rapid screen of pharmacokinetics of different drugs, including 5 (98RCM1216). The electron impact mass spectrum of 5 and ethyl 9,10-difluoro-3-methyl-7-oxo-2,3-dihydro-7Ff-pyrido[l,2,3- fe]-l,4-benzoxazine-6-carboxylate was reported (97MI28). Electron impact/Fourier transform... [Pg.268]

C. Aguilar, I. Feirer, R Bonnll, R. M. Marce and D. Barcelo, Monitoring of pesticides in river water based on samples previously stored in polymeric cartridges followed by on-line solid-phase extraction-liquid cliromatography-diode array detection and confirmation by atmospheric pressure chemical ionization mass spectrometry . Anal. Chim. Acta 386 237-248 (1999). [Pg.374]

S. Lacorte and D. Barcelo, Determination of parts per trillion levels of organophospho-rus pesticides in groundwater by automated on-line liquid- solid extraction followed by liquid chr omatography/atmospheric pressure chemical ionization mass spectrometry using positive and negative ion modes of operation . Anal. Chem. 68 2464- 2470 (1996). [Pg.374]

I. Eeirer, V. Pichon, M. C. Hennion and D. Barcelo, Automated sample preparation with exti action columns by means of anti-isoproturon immunosorbents for the determination of phenylurea herbicides in water followed by liquid chi omatography diode array detection and liquid clrromatogi aphy-atmospheric pressure chemical ionization mass spectrometry , 7. Chromatogr. Ill 91-98 (1997). [Pg.375]

TTigh pressure mass spectrometry has recently provided much detailed kinetic data (5, 12, 13, 14, 15, 17, 22, 24, 26, 29) concerning ionic reactions heretofore unobtainable by other means. This information has led to increased understanding of primary reaction processes and the fate of ionic intermediates formed in these processes but under conditions distinctly different from those which prevail in irradiated gases near room temperature and near atmospheric pressure. Conclusive identification and measurements of the rate constants of ionic reactions under the latter conditions remain as both significant and formidable problems. [Pg.284]

Electrospray ionization occurs by the same four steps as listed above for thermospray (see Section 4.6). In contrast to thermospray, and most other ionization methods nsed in mass spectrometry, it shonld be noted that electrospray ionization nnnsnally takes place at atmospheric pressure. A similar process carried out under vacuum is known as electrohydrodynamic ionization and gives rise to qnite different analytical results. This technique has not been developed into a commercial LC-MS interface and will not be considered further. [Pg.158]

Cl is an efficient, and relatively mild, method of ionization which takes place at a relatively high pressure, when compared to other methods of ionization used in mass spectrometry. The kinetics of the ion-molecule reactions involved would suggest that ultimate sensitivity should be obtained when ionization takes place at atmospheric pressure. It is not possible, however, to use the conventional source of electrons, a heated metallic filament, to effect the initial ionization of a reagent gas at such pressures, and an alternative, such as Ni, a emitter, or a corona discharge, must be employed. The corona discharge is used in commercially available APCI systems as it gives greater sensitivity and is less hazardous than the alternative. [Pg.181]

Anacleto, J. F., QuiUiam, M. A. and Boyd, R. K., Analysis of fuUerene soot extracts by liquid chromatography-mass spectrometry using atmospheric pressure ionization , in Proceedings of the 41st ASMS Conference on Mass Spectrometry and Allied Topics, San Francisco, CA, May 30-June 4, 1993, p. 1083. [Pg.185]


See other pages where Atmospheric pressure mass spectrometry is mentioned: [Pg.26]    [Pg.13]    [Pg.77]    [Pg.277]    [Pg.291]    [Pg.147]    [Pg.14]    [Pg.42]    [Pg.45]    [Pg.255]    [Pg.334]    [Pg.52]   
See also in sourсe #XX -- [ Pg.159 , Pg.171 ]




SEARCH



Atmospheric mass

Atmospheric pressure chemical ionisation-mass spectrometry

Atmospheric pressure chemical ionization-mass spectrometry

Atmospheric pressure desorption-mass spectrometry

Atmospheric pressure ionization mass spectrometry

Atmospheric-pressure chemical ionization and mass spectrometry

HPLC-atmospheric pressure chemical ionization mass spectrometry

High performance liquid chromatography/atmospheric pressure ionization-mass spectrometry

High performance liquid chromatography/atmospheric pressure ionization-tandem mass spectrometry

Liquid chromatography atmospheric pressure ionization mass spectrometry

Liquid chromatography-mass spectrometry atmospheric-pressure ionization techniques

MALDI mass spectrometry atmospheric pressure

Mass atmospheric pressure

Mass spectrometry detectors atmospheric pressure chemical ionization

© 2024 chempedia.info