Continuous flow fast atom bombardment

Caprioli, R.M., Continuous-Flow Fast Atom Bombardment Mass Spectrometry, Wiley, New York, 1990. 

Several other interface designs were introduced over this period, including continuous flow fast atom bombardment (CFFAB)" and the particle beam interface (PBI)," but it was not until the introduction of the API source that LC/MS applications really came to the forefront for quantitative analysis. Early work by Muck and Henion proved the utility of an atmospheric pressure interface using a tandem quadrupole mass spectrometer. 

Moseley, M. A., Deterding, L. J., Tomer, K. B., and Jorgenson, J. W. Coupling of capillary zone electrophoresis and capillary liquid chromatography with coaxial continuous-flow fast atom bombardment tandem sector mass spectrometry, /. Chromatogr., 480, 197, 1989. 

The mass spectra of mixtures are often too complex to be interpreted unambiguously, thus favouring the separation of the components of mixtures before examination by mass spectrometry. Nevertheless, direct polymer/additive mixture analysis has been reported [22,23], which is greatly aided by tandem MS. Coupling of mass spectrometry and a flowing liquid stream involves vaporisation and solvent stripping before introduction of the solute into an ion source for gas-phase ionisation (Section 1.33.2). Widespread LC-MS interfaces are thermospray (TSP), continuous-flow fast atom bombardment (CF-FAB), electrospray (ESP), etc. Also, supercritical fluids have been linked to mass spectrometry (SFE-MS, SFC-MS). A mass spectrometer may have more than one inlet (total inlet systems). 

The combination of CE with continuous-flow fast atom bombardment (CF-FAB-MS) requires the use of an interface, because of the incompatibility of the CF-FAB process and CE for liquid flow [888], The CF-FAB source requires a solvent, usually water/glycerol (95-5 v/v), which is maintained at a steady flow-rate of 2-15mLmin 1. Flow-rate in CE does not exceed 1 nLmin-1. 

CF-FAB MS Continuous-flow fast atom bombardment mass spectrometry... 

DGE a AC AMS APCI API AP-MALDI APPI ASAP BIRD c CAD CE CF CF-FAB Cl CID cw CZE Da DAPCI DART DC DE DESI DIOS DTIMS EC ECD El ELDI EM ESI ETD eV f FAB FAIMS FD FI FT FTICR two-dimensional gel electrophoresis atto, 10 18 alternating current accelerator mass spectrometry atmospheric pressure chemical ionization atmospheric pressure ionization atmospheric pressure matrix-assisted laser desorption/ionization atmospheric pressure photoionization atmospheric-pressure solids analysis probe blackbody infrared radiative dissociation centi, 10-2 collision-activated dissociation capillary electrophoresis continuous flow continuous flow fast atom bombardment chemical ionization collision-induced dissociation continuous wave capillary zone electrophoresis dalton desorption atmospheric pressure chemical ionization direct analysis in real time direct current delayed extraction desorption electrospray ionization desorption/ionization on silicon drift tube ion mobility spectrometry electrochromatography electron capture dissociation electron ionization electrospray-assisted laser desorption/ionization electron multiplier electrospray ionization electron transfer dissociation electron volt femto, 1CT15 fast atom bombardment field asymmetric waveform ion mobility spectrometry field desorption field ionization Fourier transform Fourier transform ion cyclotron resonance... 

M. A. Moseley, L. J. Deterding, K. B. Tomer, and J. W. Jorgenson. Nanoscale Packed-Capillary Liquid Chromatography Coupled with Mass Spectrometry Using a Coaxial Continuous-Flow Fast Atom Bombardment Interface. Anal. Chem., 63(1991) 1467-1473. 

R. M. Caprioli and W. T. Moore. Continuous-Flow Fast Atom Bombardment Mass Spectrometry. In Methods in Enzymology Mass Spectrometry, ed. J. A. McCloskey. Methods in Enzymology 193, Academic Press, San Diego, 1990, 214-237. 

L.J. Deterding, M.A. Moseley, K.B. Tomer and J.W. Jorgenson, Coaxial continuous flow fast atom bombardment in conjunction with tandem mass spectrometry for the analysis of biomolecules, Anal. Chem., 61 (1989) 2504-2511. 

Several years later, the next step in the application of MS-MS for mixture analysis was developed by Hunt et al. [3-5] who described a master scheme for the direct analysis of organic compounds in environmental samples using soft chemical ionisation (Cl) to perform product, parent and neutral loss MS-MS experiments for identification [6,7]. The breakthrough in LC-MS was the development of soft ionisation techniques, e.g. desorption ionisation (continuous flow-fast atom bombardment (CF-FAB), secondary ion mass spectrometry (SIMS) or laser desorption (LD)), and nebulisation ionisation techniques such as thermospray ionisation (TSI), and atmospheric pressure ionisation (API) techniques such as atmospheric pressure chemical ionisation (APCI), and electrospray ionisation (ESI). 

In standard FAB, the surface of the matrix solution is depleted of analyte and suffers from radiational damage during elongated measurements. Refreshment of the surface proceeds by diffusion (limited by the viscosity of the matrix) or evaporation. Continuous-flow fast atom bombardment (CF-FAB) continuously refreshes the surface exposed to the atom beam. [107,108] The same effect is obtained in slightly different way by the frit-fast atom bombardment (frit-FAB) technique. [109,110] In addition, both CF-FAB and frit-FAB can be used for online-coupling of liquid chromatography (LC, Chap. 12) [111] or capillary electrophoresis (CE) to a FAB ion source. [112]... 

The most commonly used FAB interface in LC/MS is known as continuous-flow fast-atom bombardment (CF-FAB) ionization, in which the fast atoms or ions are directed at a target along which the LC eluent flowsd In a CF-FAB, the LC eluent, mixed with a FAB matrix such as 5% aqueous glycerol, is continuously introduced and deposited on the tip of a FAB probe. The maximum flow rate is in the range of 5 to 15 pL/min. A comprehensive review of the principles and application of CF-FAB for LC/MS has been written by Caprioli. ... 

The first approaches to the coupling of liquid-phase separation techniques with mass spectrometry were designed for HPLC needs, starting in the 1970s with since-forgotten techniques such as direct liquid introduction (DLI) and moving belt. In the 1980s, techniques such as thermospray, continuous-flow-fast atom bombardment (CF-FAB), and particle beam arose. 

Wolfender, J.-L. et al.. Comparison of liquid chromatography/electrospray, atmospheric pressure chemical ionization, thermospray and continuous-flow fast atom bombardment mass spectrometry for the determination of secondary metabolites in crude plant extracts, J. Mass Spectrom. Rapid Commun. Mass Spectrom., S35, 1995. 

During the last decade, research efforts in the field of LC-MS have changed considerably. Technological problems in interfacing appear to be solved, and a number of interfaces have been found suitable for the analysis of flavonoids. These include TSP, continuous-flow fast-atom bombardment (CF-FAB), ESI, and APCI. LC-MS is frequently used to determine the occurrence of previously identified compounds or to target the isolation of new compounds (Table 2.11). LC MS is rarely used for complete structural characterization, but it provides the molecular mass of the different constituents in a sample. Then, further structural characterization can be performed by LC-MS-MS and MS-MS analysis. In recent years, the combination of HPLC coupled simultaneously to a diode-array (UV-Vis) detector and to a mass spectrometer equipped with an ESI or APCI source has been the method of choice for the determination of flavonoid masses. Applications of LC-MS (and LC-MS-MS) in flavonoid... 

Basic Protocol 2 Fast Atom Bombardment, Liquid Secondary Ion Mass Spectrometry, and Continuous-Flow Fast Atom Bombardment of Carotenoids F2.4.2... 

---