Ionization technique

An ion source is the part of a mass spectrometer where analytes are ionized. The resulting ions are then transmitted to the mass analyzer. Many technologies for ion generation have been developed and nearly every ionization technique has been 

Lipidomics Comprehensive Mass Spectrometry of Lipids, First Edition. Xianlin Han. 2016 John Wiley Sons, Inc. Published 2016 by Jdin Wiley Sons, Inc. 

---

On the other hand, there are some ionization techniques that are very useful, particularly at very high mass, but produce ions only in pulses. For these sources, the ion extraction field can be left on continuously. Two prominent examples are Californium radionuclide and laser desorption ionization. In the former, nuclear disintegration occurs within a very short time frame to give a... 

Some mild methods of ionization (e.g., chemical ionization. Cl fast-atom bombardment, FAB electrospray, ES) provide molecular or quasi-molecular ions with so little excess of energy that little or no fragmentation takes place. Thus, there are few, if any, normal fragment ions, and metastable ions are virtually nonexistent. Although these mild ionization techniques are ideal for yielding molecular mass information, they are almost useless for providing details of molecular structure, a decided disadvantage. 

This method is still in use but is not described in this book because it has been superseded by more recent developments, such as particle beam and electrospray. These newer techniques have no moving parts, are quite robust, and can handle a wide variety of compound types. Chapters 8 through 13 describe these newer ionization techniques, including electrospray, atmospheric pressure ionization, plasmaspray, thermospray, dynamic fast-atom bombardment (FAB), and particle beam. 

Until 1981, mass spectrometry was limited, generally, to the analysis of volatile, relatively low-molecular-mass samples and was difficult to apply to nonvolatile peptides and proteins without first cutting them chemically into smaller volatile segments. During the past decade, the situation has changed radically with the advent of new ionization techniques and the development of tandem mass spectrometry. Now, the mass spectrometer has a well-deserved place in any laboratory interested in the analysis of peptides and proteins. 

Thus, either the emitted light or the ions formed can be used to examine samples. For example, the mass spectrometric ionization technique of atmospheric-pressure chemical ionization (APCI) utilizes a corona discharge to enhance the number of ions formed. Carbon arc discharges have been used to generate ions of otherwise analytically intractable inorganic substances, with the ions being examined by mass spectrometry. 

Thermal or surface emission of ions is one of the oldest ionization techniques used for isotope ratio measurements. 

Fast-atom bombardment (FAB) is an ionization technique that produces a protonated or deprotonated molecular ion, hence a molecular mass for the sample. It can be used for analysis of peptides up to m/z about 5000. 

The use of mass spectrometry for the analysis of peptides, proteins, and enzymes has been summarized. This chapter should be read in conjunction with others, including Chapter 45, An Introduction to Biotechnology, and Chapters 1 through 5, which describe specific ionization techniques in detail. 

Thermospray interface. Provides liquid chromatographic effluent continuously through a heated capillary vaporizer tube to the mass spectrometer. Solvent molecules evaporate away from the partially vaporized liquid, and analyte ions are transmitted to the mass spectrometer s ion optics. The ionization technique must be specified, e.g., preexisting ions, salt buffer, filament, or electrical discharge. 

The analysis of penicillins by mass spectrometry (qv) has developed with the advent of novel techniques such as fast atom bombardment. The use of soft ionization techniques has enabled the analysis of thermally labile nonvolatile compounds. These techniques have proven extremely valuable in providing abundant molecular weight information from underivatized penicillins, both as free acids and as metal salts (15). 

Alternative ( soft ) ionization techniques are not usually required for aromatic isothiazoles because of the stability of the molecular ions under electron impact. This is not the case for the fully saturated ring systems, which fragment readily. The sultam (25) has no significant molecular ion under electron impact conditions, but using field desorption techniques the M + lY ion. is the base peak (73X3861) and enables the molecular weight to be confirmed. 

In other articles in this section, a method of analysis is described called Secondary Ion Mass Spectrometry (SIMS), in which material is sputtered from a surface using an ion beam and the minor components that are ejected as positive or negative ions are analyzed by a mass spectrometer. Over the past few years, methods that post-ion-ize the major neutral components ejected from surfaces under ion-beam or laser bombardment have been introduced because of the improved quantitative aspects obtainable by analyzing the major ejected channel. These techniques include SALI, Sputter-Initiated Resonance Ionization Spectroscopy (SIRIS), and Sputtered Neutral Mass Spectrometry (SNMS) or electron-gas post-ionization. Post-ionization techniques for surface analysis have received widespread interest because of their increased sensitivity, compared to more traditional surface analysis techniques, such as X-Ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES), and their more reliable quantitation, compared to SIMS. 

A comparison of the various post-ionization techniques electron-gas bombardment, resonant and nonresonant laser ionization, etc. While some of the numbers are outdated, the relative capabilities of these methods have remained the same. This is a well-written review article that reiterates the specific areas where post-ionization has advantages over SIMS. 

A discussion of the motivation behind doing sputtered neutral analysis versus SIMS, plus a description of the first prototype SALI instrument. A well written introduction for someone without previous surface analysis experience it also includes an historical overview of the various post-ionization techniques. 

R. W. Odom and B. Schueler. Laser Microprobe Mass Spectrometry Ion and Neutral Analysis, in Lasers and Mass Spectrometry (D. M. Lubman, ed.) Oxford University Press, Oxford, 1990. Presents a useful discussion of LIMS instrumental issues, including the post-ablation ionization technique. Several anal)n ical applications are presented. 

Depending on the matrix and the post-ionization technique, SN" spectra can be dominated by atomic or molecular signals. In particular, compounds with high mass... 

In both electron post-ionization techniques mass analysis is performed by means of a quadrupole mass analyzer (Sect. 3.1.2.2), and pulse counting by means of a dynode multiplier. In contrast with a magnetic sector field, a quadrupole enables swift switching between mass settings, thus enabling continuous data acquisition for many elements even at high sputter rates within thin layers. 

Surface analysis by non-resonant (NR-) laser-SNMS [3.102-3.106] has been used to improve ionization efficiency while retaining the advantages of probing the neutral component. In NR-laser-SNMS, an intense laser beam is used to ionize, non-selec-tively, all atoms and molecules within the volume intersected by the laser beam (Eig. 3.40b). With sufficient laser power density it is possible to saturate the ionization process. Eor NR-laser-SNMS adequate power densities are typically achieved in a small volume only at the focus of the laser beam. This limits sensitivity and leads to problems with quantification, because of the differences between the effective ionization volumes of different elements. The non-resonant post-ionization technique provides rapid, multi-element, and molecular survey measurements with significantly improved ionization efficiency over SIMS, although it still suffers from isoba-ric interferences. 

There are numerous ionization techniques available to the mass spectrome-trist, but for GC/MS almost all analyses are performed using either electron impact ionization or chemical ionization. 

More direct observations of the kinetic energy dependence of cross-sections should be possible using external ionization techniques where the reactant ion can be chosen by initial mass analysis and, in principle, its energy more readily controlled. Several studies using external ionization techniques, both with (2, 10, 45) and without (20, 21, 27, 41) preliminary mass selection of the reactant ion, have been reported. However, apparently with these techniques it is not possible to obtain well-defined primary ion beams at energies below 0.5-1 e.v. a region of critical importance both experimentally and theoretically. 

Because of these limitations to both the conventional internal ionization and external ionization techniques it has been impossible to obtain accurate kinetic data for the reactions of thermal energy ions. Such thermal energy data are desirable for applications in such areas as radiation chemistry, discharge and combustion phenomena, and upper atmosphere research. 

Fortunately, this backgronnd is often less of a problem than might be anticipated from the above. The majority of ionization techniques employed in LC-MS are soft ionization techniqnes which provide primarily molecular ions that occur at relatively high values of mass-to-charge ratio (m/z), rather than fragment ions which occur at relatively low m/z values. In the majority of cases, the molecular weight of the analyte is higher than those of the solvent impurities and the effect of these may therefore be minimized. 

TSP, ESI and APCI effect ionization from solution and in these cases it is not possible to separate a description of the processes involved in the ionization of an analyte from a description of the interface. These ionization techniques will therefore be described in detail in Chapter 4. 

Chemical ionization (Cl) is a technique that has been developed specifically to enhance the production of molecular species, i.e. to reduce the fragmentation associated with ionization. A number of such techniques exist and these are known collectively as soft ionization techniques . 

Cl is not the only ionization technique where this aspect of interpretation must be considered carefully fast-atom bombardment, thermospray, electrospray and atmospheric-pressure chemical ionization, described below in Sections 3.2.3, 4.6, 4.7 and 4.8, respectively, all produce adducts in the molecular ion region of their spectra. 

Fast-atom bombardment (FAB) is one of a number of ionization techniques which utilize a matrix material, in which the analyte is dissolved, to transfer sufficient energy to the analyte to facilitate ionization. In FAB, the matrix material is a liquid, such as glycerol, and the energy for ionization is provided by a high-energy atom (usually xenon) or, more recently, an ion (Cs+) beam. In conventional FAB, the solution of analyte in the matrix material is applied to the end of a probe which is placed in the source of the mass spectrometer where it is bombarded with the atom/ion beam. 

For many years, electron ionization, then more usually known as electron impact, was the only ionization method used in analytical mass spectrometry and the spectra encountered showed exclusively the positively charged species produced during this process. Electron ionization also produces negatively charged ions although these are not usually of interest as they have almost no structural significance. Other ionization techniques, such as Cl, FAB, thermospray, electrospray and APCI, however, can be made to yield negative ions which are of analytical utility. 

The ionization techniques most widely used for LC-MS, however, are termed soft ionization in that they produce primarily molecular species with little fragmentation. It is unlikely that the molecular weight alone will allow a structural assignment to be made and it is therefore desirable to be able to generate structural information from such techniques. There are two ways in which this may be done, one of which, the so-called cone-voltage or in-source fragmentation, is associated specifically with the ionization techniques of electiospray and APCl and is discussed later in Section 4.7.4. The other, termed mass spectrometry-mass spectrometry (MS-MS) or tandem mass spectrometry, is applicable to all forms of ionization, provided that appropriate hardware is available, and is described here. 

In this chapter, the main aspects of mass spectrometry that are necessary for the application of LC-MS have been described. In particular, the use of selected-ion monitoring (SIM) for the development of sensitive and specific assays, and the use of MS-MS for generating structural information from species generated by soft ionization techniques, have been highlighted. Some important aspects of both qualitative and quantitative data analysis have been described and the power of using mass profiles to enhance selectivity and sensitivity has been demonstrated. 

---