Copper Compounds chloride

JiVith ammoniacal or hydrochloric acid solution of copper(I) chloride, carbon monoxide forms the addition compound CuCl. CO. 2H2O. This reaction can be used to quantitatively remove carbon monoxide from gaseous mixtures. 

Measurements on copper) I) chloride show the vapour to be the dimer of formula CU2CI2, but molecular weight determinations in certain solvents such as pyridine show it to be present in solution as single molecules, probably because coordination compounds such as py -> CuCl (py = pyridine) are formed. 

The solid readily dissolves chemically in concentrated hydrochloric acid, forming a complex, and in ammonia as the colourless, linear, complex cation [H3N -> Cu <- NHj] (cf AgCl) if air is absent (in the presence of air, this is oxidis to a blue ammino-copper(II) complex). This solution of ammoniacal copper(I) chloride is a good solvent or carbon monoxide, forming an addition compound CuCl. CO. H2O, and as such is used in gas analysis. On passing ethyne through the ammoniacal solution, a red-brown precipitate of hydrated copper(I) dicarbide (explosive when dry) is obtained ... 

Although It IS possible to prepare aryl chlorides and aryl bromides by electrophilic aromatic substitution it is often necessary to prepare these compounds from an aromatic amine The amine is converted to the corresponding diazonmm salt and then treated with copper(I) chloride or copper(I) bromide as appropriate... 

Copper. Some 15 copper compounds (qv) have been used as micronutrient fertilizers. These include copper sulfates, oxides, chlorides, and cupric ammonium phosphate [15928-74-2] and several copper complexes and chelates. Recommended rates of Cu appHcation range from a low of 0.2 to as much as 14 kg/hm. Both soil and foHar appHcations are used. 

A convenient synthesis of organochlorosilanes from organosilanes is achieved by reaction with inorganic chlorides of Hg, Pt, V, Cr, Mo, Pd, Se, Bi, Fe, Sn, Cu, and even C. The last compounds, tin tetrachloride, copper(II) chloride, and, under catalytic conditions, carbon tetrachloride (117,118), are most widely used. 

Copper(I) chloride is insoluble to slightly soluble in water. SolubiUty values between 0.001 and 0.1 g/L have been reported. Hot water hydrolyzes the material to copper(I) oxide. CuCl is insoluble in dilute sulfuric and nitric acids, but forms solutions of complex compounds with hydrochloric acid, ammonia, and alkaU haUde. Copper(I) chloride is fairly stable in air at relative humidities of less than 50%, but quickly decomposes in the presence of air and moisture. 

The addition of 1,3-dicarbonyl compounds to /3-chloroazoalkenes is the basis of a pyrrole synthesis (Scheme 70a) 81TL1059). Pyrroles are also obtained by the reaction of enamines with azoalkenes (Scheme 70b) (79TL2969,81TL1475), and the copper(II) chloride catalyzed addition of 1,3-dicarbonyl compounds to arylazoalkenes (Scheme 70c) (82JOC684). 

Medium 20,000-50,000 4 Acrylic resins, plastics, PVC, ammonium chloride, DMT, copper compounds, lead Ferroalloys, fluorspar, nickel Iron, potash, glass-making mixtures... 

Reaction.—a too c.c. flask to a short upright condenser (see Fig. 86) and to the upper end of the condensei attach a vertical delivery tube, dipping into an ammoniacal cuprous chloride solution. Pour 2—3 c.c. of ethylene bromide into the flask with 4 times its volume of strong methyl alcoholic potash, which is prepared by boiling methyl alcohol with excess of caustic potash on the water-bath with upright condenser. On gently heating, a rapid evolution of acetylene occurs and the characteristic brown copper compound (C2H,Cu,HjO) is precipitated from the cuprous chloride solution. 

Some of the cuprous chloride compounds of the diazonium salts have been isolated and analysed, and coirespond to the formula CoH.-.NjCl.CuoCIo (Hantzsch). The formation of a crystalline copper compound is rendeied very evident in the present preparation.. A modification of Sandmeyer s reaction IS the introduction of precipitated metallic copper in place of the cuprous salt (Gattermann). 

Cupri-. cupric, copper(II). -azetst, n. cupric acetate, copper(II) acetate, -carbonat, n. cupric carbonate, copper(II) carbonate, -chlorid, n. cupric chloride, copper(II) chloride. -hydroxyd, n. cupric hydroxide, cop-per(II) hydroxide. -ion, n. cupric ion, copper(II) ion. -ozalat, n. cupric oxalate, copper(II) oxalate, -oxyd, n. cupric oxide, copper(II) oxide. -salz, n. cupric salt, copper(II) salt, -suifat, n. cupric sulfate. copper(II) sulfate, -sulfid, n. cupric sulfide, copper(II) sulfide, -verbihdung, /. cupric compound, copper(II) compound, -wein-saure, /. cupritartaric acid. 

Cupro-. cuprous, copper(I), cupro-. -chlorid, n. cuprous chloride, copper(I) chloride, -cy-aniir, n. cuprous cyanide, copper(I) cyanide cuprocyanide, cyanocuprate(I). -jodid, n. cuprous iodide, copper(I) iodide, -mangan, n. cupromanganese. -oxyd, n. cuprous oxide, copper(I) oxide, -salz, n. cuprous salt, cop-per(I) salt, -suifocyantir, n. cuprous thiocyanate, copper (I) thiocyanate, -verbin-dUDg, /. cuprous compound, copper(I) compound. 

The Ullman reaction has long been known as a method for the synthesis of aromatic ethers by the reaction of a phenol with an aromatic halide in the presence of a copper compound as a catalyst. It is a variation on the nucleophilic substitution reaction since a phenolic salt reacts with the halide. Nonactivated aromatic halides can be used in the synthesis of poly(arylene edier)s, dius providing a way of obtaining structures not available by the conventional nucleophilic route. The ease of halogen displacement was found to be the reverse of that observed for activated nucleophilic substitution reaction, that is, I > Br > Cl F. The polymerizations are conducted in benzophenone with a cuprous chloride-pyridine complex as a catalyst. Bromine compounds are the favored reactants.53,124 127 Poly(arylene ether)s have been prepared by Ullman coupling of bisphenols and... 

Carboxylic acids can be prepared in moderate-to-high yields by treatment of diazonium fluoroborates with carbon monoxide and palladium acetate or copper(II) chloride. The mixed anhydride ArCOOCOMe is an intermediate that can be isolated. Other mixed anhydrides can be prepared by the use of other salts instead of sodium acetate." An arylpalladium compound is probably an intermediate." ... 

CHROMIUM TRIOXIDE-PYRIDINE COMPLEX, preparation in situ, 55, 84 Chrysene, 58,15, 16 fzans-Cinnamaldehyde, 57, 85 Cinnamaldehyde dimethylacetal, 57, 84 Cinnamyl alcohol, 56,105 58, 9 2-Cinnamylthio-2-thiazoline, 56, 82 Citric acid, 58,43 Citronellal, 58, 107, 112 Cleavage of methyl ethers with iodotri-methylsilane, 59, 35 Cobalt(II) acetylacetonate, 57, 13 Conjugate addition of aryl aldehydes, 59, 53 Copper (I) bromide, 58, 52, 54, 56 59,123 COPPER CATALYZED ARYLATION OF /3-DlCARBONYL COMPOUNDS, 58, 52 Copper (I) chloride, 57, 34 Copper (II) chloride, 56, 10 Copper(I) iodide, 55, 105, 123, 124 Copper(I) oxide, 59, 206 Copper(ll) oxide, 56, 10 Copper salts of carboxylic acids, 59, 127 Copper(l) thiophenoxide, 55, 123 59, 210 Copper(l) trifluoromethanesulfonate, 59, 202... 

C03-0108. What species are present in solution when the following compounds dissolve in water (a) sodium dichromate (b) copper(II) chloride (c) barium hydroxide (d) methanol (e) sodium hydrogen carbonate and (f) iron(III) nitrate. 

Write the formula for each of the following compounds (a) hydrogen iodide, (b) calcium chloride, (c) lithium oxide, (d) silver nitrate, (e) iron(II) sulfide, (/) aluminum chloride, (g) ammonium sulfate, (h) zinc carbonate, (/) iron(lll) oxide, ( ) sodium phosphate, (k) iron(H) acetate, (/) ammonium cyanide, and (m) copper(II) chloride. 

The effect of inorganic additives upon ignition delay in anilinium nitrate-red finning nitric acid systems was examined. The insoluble compounds copper(I) chloride, potassium permanganate, sodium pentacyanonitrosylferrate and vanadium(V) oxide were moderately effective promoters, while the soluble ammonium or sodium metavanadates were very effective, producing vigorous ignition. 

Copper compounds are used routinely and widely to control freshwater snails that serve as intermediate vectors of schistosomiasis and other diseases that afflict humans (Hasler 1949 NAS 1977 Rowe and Prince 1983 Winger etal. 1984 Al-Sabri etal. 1993). These compounds include copper sulfate, copper pentachlorophenate, copper carbonate, copper-tartaric acid, Paris green (copper arsenite-acetate), copper oxide, copper chloride, copper acetyl acetonate, copper dimethyl dithiocar-bamate, copper ricinoleate, and copper rosinate (Cheng 1979). Also, many species of oyster enemies are controlled by copper sulfate dips. All tested species of marine gastropods, tunicates, echinoderms, and crabs that had been dipped for 5 seconds in a saturated solution of copper sulfate died if held in air for as little as a few seconds to 8 h mussels, however, were resistant (MacKenzie 1961). 

Sultam 53 has proved to be an excellent chiral auxiliary in various asymmetric C-C bond formation reactions. One more example of using sultam 53 is the asymmetric induction of copper(I) chloride-catalyzed 1,4-addition of alkyl magnesium chlorides to a,/ -disubstituted (/ )-enesultams 60. Subsequent protonation of the reaction product gives compound 61c as the major product (Scheme 2-30 and Table 2-11).56... 

Copper (I) chloride, reaction with an organomagnesium compound, 50, 98... 

To avoid the necessity of memorizing a separate name for each ion, we can use the Stock system. In the Stock system, the charge of the cation appears as a Roman numeral immediately after the name of the element. Using the Stock system, we write Fe2+ as the iron(II) ion, and Cu+ as the copper(I) ion. Other than the necessity of indicating the charges, there are no differences between the naming of transition metal compounds and other compounds of the metals. So while KC1 is potassium chloride, CuCl is copper(I) chloride. 

The solvent process involves treating phthalonitrile with any one of a number of copper salts in the presence of a solvent at 120 to 220°C [10]. Copper(I)chloride is most important. The list of suitable solvents is headed by those with a boiling point above 180°C, such as trichlorobenzene, nitrobenzene, naphthalene, and kerosene. A metallic catalyst such as molybdenum oxide or ammonium molybdate may be added to enhance the yield, to shorten the reaction time, and to reduce the necessary temperature. Other suitable catalysts are carbonyl compounds of molybdenum, titanium, or iron. The process may be accelerated by adding ammonia, urea, or tertiary organic bases such as pyridine or quinoline. As a result of improved temperature maintenance and better reaction control, the solvent method affords yields of 95% and more, even on a commercial scale. There is a certain disadvantage to the fact that the solvent reaction requires considerably more time than dry methods. 

The phthalonitrile process has the particular advantage over the phthalic anhydride process of forming ring-substituted chloro-copper phthalocyanines. Using copper(I)chloride produces so-called semi-chloro Copper Phalocyanine Blue, a pigment which possesses a statistical average of 0.5 chlorine atoms per copper phthalocyanine molecule. Copper(II)chloride, on the other hand, affords a product which comprises an average of one chlorine atom per copper phthalocyanine molecule. A prerequisite for the formation of the chloro substituted compound, however, is the absence of ammonia or urea in the reaction mixture. 

Intermediates such as 224 resulting from the nudeophilic addition of C,H-acidic compounds to allenyl ketones such as 222 do not only yield simple addition products such as 225 by proton transfer (Scheme 7.34) [259]. If the C,H-acidic compound contains at least one carbonyl group, a ring dosure is also possible to give pyran derivatives such as 226. The reaction of a similar allenyl ketone with dimethyl mal-onate, methyl acetoacetate or methyl cyanoacetate leads to a-pyrones by an analogous route however, the yields are low (20-32%) [260], The formation of oxaphos-pholenes 229 from ketones 227 and trivalent phosphorus compounds 228 can similarly be explained by nucleophilic attack at the central carbon atom of the allene followed by a second attack of the oxygen atom of the ketone at the phosphorus atom [261, 262], Treatment of the allenic ester 230 with copper(I) chloride and tributyltin hydride in N-methylpyrrolidone (NMP) affords the cephalosporin derivative 232 [263], The authors postulated a Michael addition of copper(I) hydride to the electron-... 

---