Compounds types

Coal liquids can also be separated by various chromatographic techniques, including size exclusion chromatography, which also provides, in addition to fractionation, an indication of the molecular weight distribution within the sample (Wong, 1987 Bartle, 1989). 

The distribution of liquids produced from coal depends on the character of the coal and on the process conditions and, particularly, on the degree of hydrogen addition to the coal (Aczel et al., 1978 Schiller, 1978 Schwager et al., 1978 Wooton et al., 1978 Whitehurst et al., 1980 Kershaw, 1989c). Nevertheless, it is in this area that mass spectrometry has proved to be extremely useful, providing valuable evidence about the nature of the compound types in coal liquids and their relationship to the original coal (Anderson et al., 1981 Batts and Batts, 1989). 

There is evidence for the similarity of the polynuclear aromatic types produced (thermally) from coal under different conditions suggesting that the major compound types are either representative of similar aromatic moieties in the original coal or a result of the processing conditions involving complex reactions that lead to similar final products, that is, heat is an equalizer in terms 

FIGURE 18.14 Fractionation of coal liquids into compound types. 

In more generic terms, the liquid products may be classified as neutral oils (essentially pure hydrocarbons), tar acids (phenols), and tar bases (basic nitrogen compounds) (Farcasiu, 1977). 

---

In the reaction of 2-aminoselenazoIe with ethyl propiolate, in addition to compound type 7 (50% yield), compounds 8 and 9 were also isolated. Compound 7 is probably formed through the cis isomer of 8 (Scheme 55). 

As a rule of thumb, one can say that the efficiency of separation of mixtures and the simplicity of operating and maintaining apparatus are much greater for GC than for LC. Hence, other things being equal, GC is most often the technique of first choice and can be used with a very wide variety of compound types. However, for nonvolatile or thermally labile substances like peptides, proteins, nucleotides, sugars, carbohydrates, and many organometallics, GC may be ruled out completely... 

This method is still in use but is not described in this book because it has been superseded by more recent developments, such as particle beam and electrospray. These newer techniques have no moving parts, are quite robust, and can handle a wide variety of compound types. Chapters 8 through 13 describe these newer ionization techniques, including electrospray, atmospheric pressure ionization, plasmaspray, thermospray, dynamic fast-atom bombardment (FAB), and particle beam. 

Trialkyl esters of phosphonic acid exist ia two structurally isomeric forms. The trialkylphosphites, P(OR)2, are isomers of the more stable phosphonates, 0=PR(0R)2, and the former may be rearranged to resemble the latter with catalytic quantities of alkylating agent. The dialkyl alkylphosphonates are used as flame retardants, plasticizers, and iatermediates. The MichaeUs-Arbusov reaction may be used for a variety of compound types, including mono- and diphosphites having aryl as weU as alkyl substituents (22). Triaryl phosphites do not readily undergo the MichaeUs-Arbusov reaction, although there are a few special cases. 

Detectors. The function of the gc detector is to sense the presence of a constituent of the sample at the outlet of the column. Selectivity is the property that allows the detector to discriminate between constituents. Thus a detector selective to a particular compound type responds especially weU to compounds of that type, but not to other chemical species. The response is the signal strength generated by a given quantity of material. Sensitivity is a measure of the abiHty of the detector to register the presence of the component of interest. It is usually given as the quantity of material that can be detected having a response at twice the noise level of the detector. 

This index contains over 40,000 individual entries to the 6200 text pages of Volumes 1-7. The index mainly covers general classes of heterocyclic compound and specific heterocyclic compounds, but also included are natural products, other organic and organometallic compounds where their synthesis or use involves heterocyclic compounds, types of reaction, named reactions, spectroscopic techniques and topics involving heterocyclic compounds. 

The followmg types of studies will not be presented individually but may have contnbuted supportmg data to coverage by compound type conformational analyses [23 24, 25, 26 27], fluoropolymers [28, 29, 30 31, 32], solid-state NMR [ii], and solvent effects [34 35, 36, 37] Many excellent articles with m-depth NMR interpretation of one specific compound or of a small, structurally related group of compounds can be found in the chemical hterature A few of these, not incorporated elsewhere in this secUon are referenced here carbonyl fluondes [JS 39 40], fluoropropanes [41 42, 43], fluorocyclopropanes [44, 45 46], fluorobutanes [47], perfluorocyclobutanone [48], fluorohexanes [49], and vinyl fluondes [50, 51 52, 53, 54]... 

With imines, salts formation is accompanied by characteristic spectral changes (153) (a) a bathochromic shift in the ultraviolet region by as much as 50 m/i, according to compound type and to properties of any auxochrome present, and (b) a high frequency shift of the... 

Although many carbonyl derivatives act as acyl cation equivalents, R(C=0)" in synthetic chemistry, the inherent polarity of the carbonyl group makes it much more difficult to find compounds that will act as equivalents of acyl anions, R(C=0) . Since the 1960s, major progress has been made in this area, and there are now a wide variety of compound types that can react in this way. As in so many areas of organic chemistry, heterocyclic compounds take pride of place and form the basis of many of the most useful methods. In recent years there has been particular interest in developing chiral acyl anion equivalents that will show high... 

Overall, the technical complexity of the Deans switch system is considerably greater than that of a mechanical switching valve and it is accepted that reliability and ease of use is reduced as the system complexity increases. For many compound types, however, the completely non-intrusive nature of the Deans method offers sufficient advantages to justify its application. However, the use of modern electronic pressure and flow controls integrated into the overall computer control of the chromatographic system does now make the operation of Deans switches significantly easier or more reliable than has been reported in its earlier applications. 

LC-GC is a very powerful analytical technique because of its selectivity and sensitivity in analysing complex mixtures and therefore it has been used extensively to determine trace components in environmental samples (2, 5,77). LC allows preseparation and concentration of the components into compound types, with GC being used to analyse the fractions. The advantages of on-line LC-GC over the off-line System are, first, the less sample which is required and, secondly, that there is less need for laborious sample pretreatment because the method is automated (78). 

After leaving the extruder, the preforms are cooled. There are two types of cooling processes used. The choice depends on the compound type being extruded. 

Selected Examples of NSO Compound Types Found in Crude Oils (MW = Molecular Weight, NBP = Boiling Point at 760 mm Hg, MP = Melting Point) [Source of Data Reference 63]... 

Steel, whether in structural form or as a sheet, can be protected by many different coating systems, such as paint, plastic materials, concrete and other metals, either singly or in combination (such as a metal coating followed by a paint system, or a plastic coating). Examples of this compound type of... 

The lowest coordination number of tantalum or niobium permitted by crystal chemistry formalism is 6, which corresponds to an octahedral configuration. X Me ratios that equal 3, 2 or 1 can, therefore, be obtained by corresponding substitutions in the cationic sub-lattice. A condition for such substitution is no doubt steric similarity between the second cation and the tantalum or niobium ion so as to enable its replacement in the octahedral polyhedron. In such cases, the structure of the compound consists of oxyfluoride octahedrons that are linked by their vertexes, sides or faces, according to the compound type, MeX3, MeX2 or MeX respectively. Table 37 lists compounds that have a coordination-type structure [259-261]. 

Maximum benefit from Gas Chromatography and Mass Spectrometry will be obtained if the user is aware of the information contained in the book. That is, Part I should be read to gain a practical understanding of GC/MS technology. In Part II, the reader will discover the nature of the material contained in each chapter. GC conditions for separating specific compounds are found under the appropriate chapter headings. The compounds for each GC separation are listed in order of elution, but more important, conditions that are likely to separate similar compound types are shown. Part II also contains information on derivatization, as well as on mass spectral interpretation for derivatized and underivatized compounds. Part III, combined with information from a library search, provides a list of ion masses and neutral losses for interpreting unknown compounds. The appendices in Part IV contain a wealth of information of value to the practice of GC and MS. 

Compound types Aromatics Olefins Alcohols Nitriles Acids CHC12 CC13 CH2C1 NO, Diols Ketones Ethers Aldehydes N(Me), Esters Epoxides Nitromethane Nitrogroups Pyridine Dioxane Aromatic bases... 

II. GC Conditions, Derivatization, and Mass Spectral Interpretation of Specific Compound Types 43... 

The book is divided into four parts. Part I, The Fundamentals of GC/MS, includes practical discussions on GC/MS, interpretation of mass spectra, and quantitative GC/MS. Part II, GC Conditions, Derivatization, and Mass Spectral Interpretation of Specific Compound Types, contains chapters for a variety of compounds, such as acids, amines, and common contaminants. Also included are GC conditions, methods for derivatization, and discussions of mass spectral interpretation with examples. Part III, Ions for Determining Unknown Structures, is a correlation of observed masses and neutral losses with suggested structures as an aid to mass spectral interpretation. Part IV, Appendices, contains procedures for derivatization, tips on GC operation, troubleshooting for GC and MS, and other information which are useful to the GC/MS user. Parts I to III also contain references that either provide additional information on a subject or provide information about subjects not covered in this book. 

In the mass spectrum of 2-hexanone (Figure 20.1), the molecular ion is apparent at m/z 100, which can be confirmed by preparing the methoxime derivative. The compound type is verified by the presence of m/z 43 and 58. 

Solvents and their impurities represent a wide class of compound types therefore, a discussion of common mass spectral features is meaningless. However, most of the mass spectra are listed in computer library search programs and The Eight Peak Index. ... 

Negative Cl can give excellent results for certain types of compounds. Compounds with electronegative substituents and unsaturation can be expected to have a large electron capture cross-section and thus work well in the negative ion mode. Frequently, much higher sensitivity is obtained for these compound types in the negative ion mode than under positive ion conditions. In addition, the molecular ion is usually very abundant. The... 

This index is divided into two parts. Part 1 gives the names of compounds as used in these volumes as well as general terms for classes of compounds, types of reactions, synthetic applications, special apparatus, and unfamiliar methods. The complete names of all specific compounds are given in normal order as written in the text (e.g., ethyl cyano-acetate appears under ethyl). Some entries are common names and others are systematic Chemical Abstracts names, whichever was used in the text. 

---