Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Containment Procedures

There are two broad dimensions to the concept of containment. Within the laboratory, one must use procedures that restrict exposure to the toxin and minimize the potential for causing immediate harm. Beyond the laboratory, one must adopt procedures that prevent spread of biologically active material. Both of these dimensions of containment must be viewed in the context of the type of laboratory that is used. [Pg.296]


The Supplement C ( reference) is especially valuable it contains procedure to restore the regression dependencies with reference to empirical data. [Pg.26]

If the contaminant is on the skin or in the eyes, immediate measures should be taken to remove it and counteract its effects. First-aid treatment usually involves flooding the affected area with clean water for at least 15 minutes. For a few chemicals, water may cause more serious problems [1]. The safety plan should anticipate and contain procedures for dealing with such possibilities. [Pg.158]

The SSAHP for Site A contained procedures and practices that did not reflect actual practices employed by workers onsite. Examples included PPE requirements, decontamination procedures, and work zone identification procedures. [Pg.193]

The book is divided into four parts. Part I, The Fundamentals of GC/MS, includes practical discussions on GC/MS, interpretation of mass spectra, and quantitative GC/MS. Part II, GC Conditions, Derivatization, and Mass Spectral Interpretation of Specific Compound Types, contains chapters for a variety of compounds, such as acids, amines, and common contaminants. Also included are GC conditions, methods for derivatization, and discussions of mass spectral interpretation with examples. Part III, Ions for Determining Unknown Structures, is a correlation of observed masses and neutral losses with suggested structures as an aid to mass spectral interpretation. Part IV, Appendices, contains procedures for derivatization, tips on GC operation, troubleshooting for GC and MS, and other information which are useful to the GC/MS user. Parts I to III also contain references that either provide additional information on a subject or provide information about subjects not covered in this book. [Pg.196]

Operations involving infectious agents or organisms will require further measures to ensure bio-security and safety. This usually involves the use of biosafety cabinets, which are designed to protect both the product and the user from contamination. Appropriate disinfection and bio-containment procedures must be adopted to prevent unwanted release of dangerous organisms. [Pg.220]

In a sequential-modular program the executive program sets up the flow-sheet sequence, identifies the recycle loops, and controls the unit operation calculations interacting with the unit operations library, physical property data bank and the other sub-routines. It will also contain procedures for the optimum ordering the calculations and routines to promote... [Pg.171]

It is sometimes desired to control some stream by varying an operating parameter. For example, in a reaction/separation system, if there is an impurity that must be purged, a common objective is to set the purge fraction so that the impurity concentration into the reactor is kept at some moderate value. Commercial packages contain procedures for... [Pg.90]

The management system has to contain procedures for dealing with complaints. This will generate yet another form of record. The complaint has to be recorded and the action(s) taken to resolve it. There will be corrective actions and preventive measures put in place as a result of the complaint. [Pg.207]

ASTM D 4057-95 contains procedures for sampling bulk oil in tanks, barges, etc. [Pg.8]

The quality manual should also contain procedures on how complaints from clients or from other parties are handled. The laboratory should have a general policy, on how to deal with complaints. [Pg.153]

It is worth to mention how the present method provides fair results for Z = 100, what was not expected, because the Ashby-Holzmann original procedure was not applicable for such a Z-value. There are differences among their procedure and ours, from the inclusion of exchange effects with the additional fact that different boundary conditions have been utilized, and from the tmncation of the energy functional. All these facts alter the values of the matching point found with a self-contained procedure where p, p and X become continuous at the same point. [Pg.207]

The GMP regulations require reprocessing procedures to be written, and it is customary but not required that NDAs/ANDAs contain procedures covering foreseeable deviations from physical specifications (e.g., color, capped tablets, deviations from hardness specifications, etc.). If the NDA/ANDA contains a reprocess provision, the applicant must produce scientific data to establish that the procedure will result in a product that is equivalent to the original product. [Pg.32]

Adventures with Atoms and Molecules, Book I, contains thirty illustrated experiments that are easy and fun to do. They can be done at home or at school. Each experiment includes a complete material list, including common items such as food coloring, vinegar, baking soda, and rubber bands. All projects also contain procedures, observations to look for, and a discussion of the results. You will be encouraged to work as real scientists do while learning some basic principles of chemistry. Learning about science can be fun ... [Pg.84]

An always statement is used to model the procedural behavior of a circuit. Here is an example of an always statement that contains procedural assignment statements. [Pg.37]

The product of this 8 year systematic study was the publication of the safety design manual entitled, "Structvires to Resist the Effects of Accidental Explosions" (Army s Publication TM5-1300). An outline of studies leading to publication of this manual is shown in Fig 1. The manual contains procedures, charts, and tables required to establish the environment of an explosion and its output in terms of blast and fragments. The relations are presented in such a manner that the type of protective structure may be selected, analyzed, and designed to provide a safe level of protection for personnel, equipment, and for separation of potentially mass detonating materials. [Pg.1]

CERS Computerized Emergency Response Series Advanced Systems Laboratories, Inc. 7137 West Main St. Uma, NY 14485 (716) 624-3276 Determines response procedures for incidents based on data from CMSDS and CHIMS. Includes firenghting information, personal protective equipment, emer ncy first aid procedures, spill and containment procedures, waste disposal procedures, and physical and health hazards. Requires 640K memory and hard disk. [Pg.286]

Validation Plan for XXXX not performed in accord with cGMPs plan lacked number of qualified personnel, completion dates inadequate to assure valid performance of manufacturing processes, validation strategy did not contain procedures, standard protocols, specific requirements. [FDA 483, 2002]... [Pg.138]

The adopted heat capacity values are derived from the enthalpy study of McDonald ( ). The enthalpy data, ten experimental points in the liquid region (941-1647 K), were measured in crucibles of BN and TiB sealed in a platinum-rhodium capsule. This containment procedure reduced the problem with the reactivity of liquid aluminum. This data suggests a constant liquid heat capacity of 7.589 cal k" mol for this 700 K range. [Pg.63]

The class composite-operator contains procedures that transform a set of chemical species of predisposed behaviors into a set of products, provided that an optional set of prespecified conditions is satisfied. These conditions can be specified by the user or imposed by the system. They may encompass virtually any symbolically encodable concept structural character, chemical behavior, spatial orientation, reaction conditions, free-energy requirements, enthalpy considerations, toxicity, etc. An instance of the composite-operator (e.g., k) calls on the following procedures to carry out the corresponding tasks ... [Pg.20]

Expert System Developer Testing Procedures. An expert system developer can generate his/her own code for testing various elements of the ES code without going to fully automated self-contained procedures. Borrowing from the conventional software side, three... [Pg.55]


See other pages where Containment Procedures is mentioned: [Pg.141]    [Pg.2362]    [Pg.285]    [Pg.38]    [Pg.3]    [Pg.110]    [Pg.281]    [Pg.277]    [Pg.323]    [Pg.3]    [Pg.185]    [Pg.184]    [Pg.38]    [Pg.2117]    [Pg.415]    [Pg.213]    [Pg.167]    [Pg.321]    [Pg.222]    [Pg.2179]    [Pg.2878]    [Pg.296]    [Pg.181]    [Pg.365]    [Pg.181]    [Pg.187]   


SEARCH



Manual procedures, containment facility

© 2024 chempedia.info