Underlying differences

A study is at present being carried out to check and validate the feasability of acoustic emission monitoring of the pneumatic testing of tanks. This study is being carried out in the context of the CIAPES program. This article gives only a brief summary of the results obtained on various materials, and different types of vessels, under different operating conditions. 

A constitutive equation is a relation between the extra stress (t) and the rate of deformation that a fluid experiences as it flows. Therefore, theoretically, the constitutive equation of a fluid characterises its macroscopic deformation behaviour under different flow conditions. It is reasonable to assume that the macroscopic behaviour of a fluid mainly depends on its microscopic structure. However, it is extremely difficult, if not impossible, to establish exact quantitative... 

Considering that the results used for these plots relate to nitrations carried out under different conditions, the success of the correlations is remarkable. 

The stability of most acetylides, M-Ce8R, in organic solvents, even at room temperature or in liquid ammonia, allows a great variety of synthetic operations to be performed under different conditions (see inter alia refs. 1-5). Lithium... 

Under different conditions [PdfOAcj2, K2CO3, flu4NBr, NMP], the 1 3 coupling product 86 with 4-aryl-9,10-dihydrophenanthrene units was obtained. The product 86 was transformed into a variety of polycyclic aromatic compounds such as 87 and 88[83], The polycyclic heteroarene-annulated cyclopen-tadicnc 90 is prepared by the coupling of 3-iodopyridine and dicyclopentadiene (89), followed by retro-Diels Alder reaction on thermolysis[84]. 

Table 3.5 Rouse Theory Expressions for the Modulus (entries labeled 1) and Compliances (entries labeled 2) for Tension and Shear Under Different Conditions ...

These results arise from considering the same polymer molecule under different conditions of permeability to the streamlines of solvent flow. 

The component C in the separated extract from the stage contact shown in Eigure 1 may be separated from the solvent B by distillation (qv), evaporation (qv), or other means, allowing solvent B to be reused for further extraction. Alternatively, the extract can be subjected to back-extraction (stripping) with solvent A under different conditions, eg, a different temperature again, the stripped solvent B can be reused for further extraction. Solvent recovery (qv) is an important factor in the economics of industrial extraction processes. 

General Properties. The trifluoromethyl group is stable under different reaction conditions, eg, the multistep classical transformation of ben2ottifluoride to ttifluoroacetic acid features successive nitration, reduction, and oxidation. 

Extraction of hemiceUulose is a complex process that alters or degrades hemiceUulose in some manner (11,138). Alkaline reagents that break hydrogen bonds are the most effective solvents but they de-estetify and initiate -elimination reactions. Polar solvents such as DMSO and dimethylformamide are more specific and are used to extract partiaUy acetylated polymers from milled wood or holoceUulose (11,139). Solvent mixtures of increasing solvent power are employed in a sequential manner (138) and advantage is taken of the different behavior of various alkaUes and alkaline complexes under different experimental conditions of extraction, concentration, and temperature (4,140). Some sequences for these elaborate extraction schemes have been summarized (138,139) and an experimenter should optimize them for the material involved and the desired end product (102). 

Molecular Weight Distribution. In industry, the MWD of PE resins is often represented by the value of the melt flow ratio (MER) as defined in Table 2. The MER value of PE is primarilly a function of catalyst type. Phillips catalysts produce PE resins with a broad MWD and their MER usually exceeds 100 Ziegler catalysts provide resins with a MWD of a medium width (MFR = 25-50) and metallocene catalysts produce PE resins with a narrow MWD (MFR = 15-25). IfPE resins with especially broad molecular weight distributions are needed, they can be produced either by using special mixed catalysts or in a series of coimected polymerization reactors operating under different reaction conditions. 

In addition to utiHty patents, some countries pubHsh patent documents under different or less stringent standards for patentabiHty and with shorter patent terms. For example, plant patents cover asexually reproduced plants. Design patents cover the decorative aspects of a product. UtiHty models and petty patents cover products with differences from the prior art that need not meet the nonobviousness standards set for utiHty patents. 

Pipeline technology iavolves desiga, coastmctioa, maintenance (qv), and operation. Although certain aspects of the technology differ under different climatic conditions, whether above or below ground or under water, etc, the basic steps are the same for Hquids pipelines as for gas pipelines. 

Standard Mosquito Repellents. Since its initial report as a promising repellent in 1954, DEET has been considered the best all-around repellent having generally acceptable characteristics, despite a continuing search for a superior chemical. Improvements include many commercial products with added cosmetic agents that use slow release technology, such as the U.S. Armed Services slow release 35% DEET formulation (16). There were 35 EPA-registered repellent products in 1994 that contained only DEET under different trade names (2). DEET is present in 192 of the 212 products mentioned previously (2). 

The transalkylation reaction is essentiaHyisothermal and is reversible. A high ratio of benzene to polyethylbenzene favors the transalkylation reaction to the right and retards the disproportionation reaction to the left. Although alkylation and transalkylation can be carried out in the same reactor, as has been practiced in some processes, higher ethylbenzene yield and purity are achieved with a separate alkylator and transalkylator, operating under different conditions optimized for the respective reactions. 

Dose—response evaluation is used in describing the quantitative relationship between the amount of exposure to a substance and the extent of toxic injury or disease. Data may be derived from animal studies or from studies in exposed human populations. Dose—response toxicity relationship for a substance varies under different exposure conditions. The risk of a substance can not be ascertained with any degree of confidence unless... 

Uranium pentafluoride [13775-07-0], UF, has been isolated under different conditions, leading to two different modifications, d and p. The former is a grayish white soHd, which is synthesized from the interaction of UF [7783-81-5] and HBr or by heating UF [10049-14-6] and UF to 80—100°C. The yellowish white P-modification is also obtained by reacting UF and UF, but at higher temperatures (150—200°C). The two different modifications of UF have both been stmcturaHy characterized. The a-form consists of infinite chains of octahedral UF units. The P-form has eight-coordinate uranium atoms with the fluorides in a geometry between dodecahedral and square antiprismatic. 

The first observation of the enantioselective properties of an albumin was made in 1958 (28) when it was discovered that the affinity for L-tryptophan exceeded that of the D-enantiomer by a factor of approximately 100. This led to more studies in 1973 of the separation of DL-tryptophan [54-12-6] C22H22N2O2, on BSA immobilized to Sepharose (29). After extensive investigation of the chromatographic behavior of numerous racemic compounds under different mobile-phase conditions, a BSA-SILICA hplc column (Resolvosil-R-BSA, Macherey-Nagel GmvH, Duren, Germany) was... 

Penta.bora.ne(9), Pentaborane(9) and can be prepared by gas-phase pyrolysis of B2H under different conditions. Pentaborane(9) is a... 

Amino Acids. Chloroformates play a most important role for the protection of the amino group of amino acids (qv) during peptide synthesis (32). The protective carbamate formed by the reaction of benzyl chloroformate and amino acid (33) can be cleaved by hydrogenolysis to free the amine after the carboxyl group has reacted further. The selectivity of the amino groups toward chloroformates results in amino-protected amino acids with the other reactive groups unprotected (34,35). Methods for the preparation of protected amino acids on an industrial scale have been developed (36,37). A wide variety of chloroformates have been used that give various carbamates that are stable or cleaved under different conditions. 

---