Viewpoint

The magnitude of the NHV has economic importance because the consumption and cost of motor fuels are frequently expressed in liters/100 km and in Francs/liter in France. From the technical viewpoint, the NHV, establishes the maximum range for a transport system with a given load. This is a decisive criterion for applications like aviation. 

The flash point of a petroleum liquid is the temperature to which it must be brought so that the vapor evolved burns spontaneously in the presence of a flame. For diesel fuel, the test is conducted according to a closed cup technique (NF T 60-103). The French specifications stipulate that the flash point should be between 55°C and 120°C. That constitutes a safety criterion during storage and distribution operations. Moreover, from an official viewpoint, petroleum products are classified in several groups according to their flash points which should never be exceeded. 

The section is divided into four parts, which discuss the common reservoir types from a geological viewpoint, the fluids which are contained within the reservoir, the principal methods of data gathering and the ways in which this data is interpreted. Each section is introduced by pointing out its commercial relevance. 

From an overall economic viewpoint, any investment proposal may be considered as an activity which initially absorbs funds and later generates money. The funds may be raised from loan capital or from shareholders capital, and the net (after tax and costs) money generated may be used to repay interest on loans and loan capital, with the balance being due to the shareholders. The shareholders profit can either be paid out as dividends, or reinvested in the company to fund the existing venture or new ventures. The following diagram indicates the overall flow of funds for a proposed project. The detailed cash movements are contained within the box labelled the project . 

There are two methods of changing the orientation of the 3D view. One method uses the ARCBALL, described earlier, to allow the operator to select any arbitrary viewpoint. As an alternative, an Orientation menu allows quick selection of standard B-,... 

Classification Societies exist to promote the safe construction of ships and to protect that condition throughout the life of the vessel. One of the tools available to shipbuilders, shipowners and surveyors that can be used to achieve these aims is Non-Destructive Examination (NDE). The intent of this presentation is to describe the application of NDE to hull structure during construction and also during periodic surveys as seen from the viewpoint of the Classification Surveyor. 

The plan of this chapter is as follows. We discuss chemisorption as a distinct topic, first from the molecular and then from the phenomenological points of view. Heterogeneous catalysis is then taken up, but now first from the phenomenological (and technologically important) viewpoint and then in terms of current knowledge about surface structures at the molecular level. Section XVIII-9F takes note of the current interest in photodriven surface processes. 

This is the classic work on molecular rotational, vibrational and electronic spectroscopy. It provides a comprehensive coverage of all aspects of infrared and optical spectroscopy of molecules from the traditional viewpoint and, both for perspective and scope, is an invaluable supplement to this section. 

The approach outlined here will describe a viewpoint which leads to the standard calculational rules used in various applications to systems in themiodynamic (themial, mechanical and chemical) equilibrium. Some applications to ideal and weakly interacting systems will be made, to illustrate how one needs to think in applying statistical considerations to physical problems. 

A comprehensive look at the effect of state selection on ion-molecule reactions from both experimental and theoretical viewpoints. 

Klug A and Crowther R A 1972 Three-dimensional image reoonstruotion from the viewpoint of information theory Nature 238 435-40... 

From an electrochemical viewpoint, stable pit growtli is maintained as long as tire local environment witliin tire pit keeps tire pit under active conditions. Thus, tire effective potential at tire pit base must be less anodic tlian tire passivation potential (U ) of tire metal in tire pit electrolyte. This may require tire presence of voltage-drop (IR-drop) elements. In tliis respect the most important factor appears to be tire fonnation of a salt film at tire pit base. (The salt film fonns because tire solubility limit of e.g. FeCl2 is exceeded in tire vicinity of tire dissolving surface in tlie highly Cl -concentrated electrolyte.)... 

A furtlier problem is tire influence of tire ratlier unusual—from tire physiological viewpoint—salt conditions necessary for crystallization. It should not be presumed tliat proteins embedded in a crystal are in tlieir most common native stmcture. It is well known tliat, witli tire exception of sodium or potassium chloride, which are not very useful for inducing crystallization, salts change key protein parameters such as tire melting temperature [19]. 

From the viewpoint of biophysical chemistry, the main problems to be solved are (i) what is the submolecular basis of... 

Good descriptions of biological phenomena from a physico-chemical viewpoint, van Oss C J 1996 Forces Interfaciales en Milieux Aqueux (Paris Masson)... 

A somewhat different viewpoint motivates this chapter, which stiesses the added meaning that the complex nature of the wave function lends to our understanding. Though it is only recently that this aspect has come to the forefront, the essential point was affimied already in 1972 by Wigner [5] in his famous essay on the role of mathematics in physics. We quote from this here at some length ... 

In molecular physics, the topological aspect has met its analogue in the Jahn-Teller effect [47,157] and, indeed, in any situation where a degeneracy of electronic states is encountered. The phase change was discussed from various viewpoints in [144,158-161] and [163]. 

I. Give a comparative account of the oxo-acids of the halogens from the viewpoint of ... 

Chemoinfonnatics is a faiily new name for a discipline that, as we shall soon see, has been around for quite a while. Different people sometimes give rather divergent definitions of chemoinfoimatics. Before we discuss these different viewpoints, let us, for the time being, accept a rather broad and general definition ... 

In the reaction of a substituted ylide (r CH—PPh ) with an aldehyde R CHO, a stereochemical problem arises. Much work has been carried out in order to achieve control of either cis- or rrans-alkene formation. This work has been reviewed several times with always changing viewpoints (A. Maercker, 1965 L.D. Bergelson, 1964 M. Schlosser, 1970 H. Best-mann, 1979). 

For several different viewpoints see (a) Beilby, A. L. J. Chem. Educ. 

With a typical ablated particle size of about 1 -pm diameter, the efficiency of transport of the ablated material is normally about 50% most of the lost material is deposited on contact with cold surfaces or by gravitational deposition. From a practical viewpoint, this deposition may require frequent cleaning of the ablation cell, transfer lines, and plasma torch. 

In the ion source, substances are converted into positive or negative ions having masses (m, mj,, m ) and a number (z) of electric charges. From a mass spectrometric viewpoint, the ratio of mass to charge (m,/z, m2/z,, m /z) is important. Generally, z = 1, in which case, m/z = mj,... 

Once basic requirements and secondary objectives have been established, the prospective purchaser will find it easier to discuss details with sales representatives. From the latter s viewpoint, it is easier to talk to a potential customer who knows what he needs from a mass spectrometer system rather than to a customer who has only a vague idea of what is required. In fact, an uninformed customer can end up purchasing an expensive instrument that is far too good for the analyses required or, at the other extreme, a cheap instrument that is inadequate for immediate needs, let alone ones that might arise in the near future. 

A basic theme throughout this book is that the long-chain character of polymers is what makes them different from their low molecular weight counterparts. Although this notion was implied in several aspects of the discussion of the shear dependence of viscosity, it never emerged explicitly as a variable to be investi-tated. It makes sense to us intuitively that longer chains should experience higher resistance to flow. Our next task is to examine this expectation quantitatively, first from an empirical viewpoint and then in terms of a model for molecular motion. 

At the transition between glassy and rubbery behavior, a distinct relaxation occurs. From one viewpoint, the molecules have enough time to jostle into more relaxed conformations from another, they have enough thermal energy to do so. 

A constant force is applied to an ideal elastomer, assumed to be a perfect network. At an initial temperature Tj the length of the sample is Ij. The temperature is raised to Tf and the final length is If. Which is larger Ij or If (remember F is a constant and Tf > Tj) Suppose a wheel were constructed with spokes of this same elastomer. From the viewpoint of an observer, the spokes are heated near the 3 o clock position-say, by exposure to sunlight-while other spokes are shaded. Assuming the torque produced can overcome any friction at the axle, would the observer see the wheel turn clockwise or counterclockwise How would this experiment contrast, in magnitude and direction, with an experiment using metal spokes ... 

Some of the distinctions that we shall have to examine in more detail before proceeding much further are the considerations of order versus disorder, solid versus liquid, and thermodynamics versus kinetics. These dualities are taken up in the next section. With those distinctions as background, we shall examine both the glassy and crystalline states from both the experimental and modelistic viewpoint. 

Before concluding this section, there is one additional thermodynamic factor to be mentioned which also has the effect of lowering. Since we shall not describe the thermodynamics of polymer solutions until Chap. 8, a quantitative treatment is inappropriate at this point. However, some relationships familiar from the behavior of low molecular weight compounds may be borrowed for qualitative discussion. The specific effect we consider is that of chain ends. The position we take is that they are foreign species from the viewpoint of crystallization. 

The last two sections have examined various aspects of the transition at from the thermodynamic viewpoint. In the next section we turn to a kinetic approach to the same transition. 

Progress in modelling and analysis of the crack problem in solids as well as contact problems for elastic and elastoplastic plates and shells gives rise to new attempts in using modern approaches to boundary value problems. The novel viewpoint of traditional treatment to many such problems, like the crack theory, enlarges the range of questions which can be clarified by mathematical tools. 

---