The literature

There are few reviews of this large and important subject, although the extensive and sustained interest in the field is demonstrated by the large and continuing flow of original research papers. These papers are often in interdisciplinary journals, which adds to reviewers diflRculties. In addition to the general references mentioned above [1-18], there is a comprehensive review [19] covering the field up to 1978 which specifically emphasizes the kinetics of reactions of solids. 

---

The correlations were generated by first choosing from the literature the best sets of vapor-pressure data for each fluid. 

This usefulness of the correlation is twq-fpld first it provides information on the cetane indices that are not aViit le in the literature as in the cases of polynuclear aromatics and sulfur-containing aromatics, and second it helps provide an evaluation of the cetane index based on a few milligrams of sample, instead of the liter or so required for the motor method. 

I This formula shows that if quantitative analysis in the infrared is to be possible, it is necessary to know the coefficients a( i ), therefore, either to have the pure substance, or to be able to obtain them from the literature... 

The accuracy of the calculated solution is highly depending of realistic values for conductivity and permeability of the tube material. While the conductivity can be found in the literature for most materials, the right permeability is harder to determine. In the RFEC technique the exciter current and thus the exciter field strength is often to high to assume a... 

Side drilled holes are widely used as reference reflectors, especially when angle beam probes are used (e.g. for weld testing). However, the distance law of side drilled holes is different to that of a flat bottomed hole. In the literature [2] a conversion formula is given which allows to convert the diameter of a side drilled hole into the diameter of a flat bottomed hole and vice versa, valid in the far field only, and for diameters greater than 1.5 times the wave length. In practical application this formula can be used down to approximately one nearfield length, without making big mistakes. Fig. 2 shows curves recorded from real flat bottomed holes, and the uncorrected and corrected DGS curves. 

Some methods that paitly cope with the above mentioned problem have been proposed in the literature. The subject has been treated in areas like Cheraometrics, Econometrics etc, giving rise for example to the methods Partial Least Squares, PLS, Ridge Regression, RR, and Principal Component Regression, PCR [2]. In this work we have chosen to illustrate the multivariable approach using PCR as our regression tool, mainly because it has a relatively easy interpretation. The basic idea of PCR is described below. 

While Eq. III-18 has been verified for small droplets, attempts to do so for liquids in capillaries (where Rm is negative and there should be a pressure reduction) have led to startling discrepancies. Potential problems include the presence of impurities leached from the capillary walls and allowance for the film of adsorbed vapor that should be present (see Chapter X). There is room for another real effect arising from structural peiturbations in the liquid induced by the vicinity of the solid capillary wall (see Chapter VI). Fisher and Israelachvili [19] review much of the literature on the verification of the Kelvin equation and report confirmatory measurements for liquid bridges between crossed mica cylinders. The situation is similar to that of the meniscus in a capillary since Rm is negative some of their results are shown in Fig. III-3. Studies in capillaries have been reviewed by Melrose [20] who concludes that the Kelvin equation is obeyed for radii at least down to 1 fim. 

The succeeding material is broadly organized according to the types of experimental quantities measured because much of the literature is so grouped. In the next chapter spread monolayers are discussed, and in later chapters the topics of adsorption from solution and of gas adsorption are considered. Irrespective of the experimental compartmentation, the conclusions as to the nature of mobile adsorbed films, that is, their structure and equations of state, will tend to be of a general validity. Thus, only a limited discussion of Gibbs monolayers has been given here, and none of such related aspects as the contact potentials of solutions or of adsorption at liquid-liquid interfaces, as it is more efficient to treat these topics later. 

This method suffers from two disadvantages. Since it measures 7 or changes in 7 rather than t directly, temperature drifts or adventitious impurities can alter 7 and be mistakenly attributed to changes in film pressure. Second, while ensuring that zero contact angle is seldom a problem in the case of pure liquids, it may be with film-covered surfaces as film material may adsorb on the slide. This problem can be a serious one roughening the plate may help, and some of the literature on techniques is summarized by Gaines [69]. On the other hand, the equipment for the Wilhelmy slide method is simple and inexpensive and can be just as accurate as the film balance described below. 

A number of refinements and applications are in the literature. Corrections may be made for discreteness of charge [36] or the excluded volume of the hydrated ions [19, 37]. The effects of surface roughness on the electrical double layer have been treated by several groups [38-41] by means of perturbative expansions and numerical analysis. Several geometries have been treated, including two eccentric spheres such as found in encapsulated proteins or drugs [42], and biconcave disks with elastic membranes to model red blood cells [43]. The double-layer repulsion between two spheres has been a topic of much attention due to its importance in colloidal stability. A new numeri-... 

There are numerous references in the literature to irreversible adsorption from solution. Irreversible adsorption is defined as the lack of desotption from an adsoibed layer equilibrated with pure solvent. Often there is no evidence of strong surface-adsorbate bond formation, either in terms of the chemistry of the system or from direct calorimetric measurements of the heat of adsorption. It is also typical that if a better solvent is used, or a strongly competitive adsorbate, then desorption is rapid and complete. Adsorption irreversibility occurs quite frequently in polymers [4] and proteins [121-123] but has also been observed in small molecules and surfactants [124-128]. Each of these cases has a different explanation and discussion. 

A seemingly more stringent test would be to determine whether the ratios of areas for various solids as obtained by means of a given isotherm equation are independent of the nature of the adsorbate. The data summarized in Table XVII-3 were selected from the literature mainly because each author had obtained areas for two or more solids using two or more adsorbates. It is seen... 

As on previous occasions, the reader is reminded that no very extensive coverage of the literature is possible in a textbook such as this one and that the emphasis is primarily on principles and their illustration. Several monographs are available for more detailed information (see General References). Useful reviews are on future directions and anunonia synthesis [2], surface analysis [3], surface mechanisms [4], dynamics of surface reactions [5], single-crystal versus actual catalysts [6], oscillatory kinetics [7], fractals [8], surface electrochemistry [9], particle size effects [10], and supported metals [11, 12]. 

In the presence of some fomi of relaxation the equations of motion must be supplemented by a temi involving a relaxation superoperator—superoperator because it maps one operator into another operator. The literature on the correct fomi of such a superoperator is large, contradictory and incomplete. In brief, the extant theories can be divided into two kinds, those without memory relaxation (Markovian) Tp and those with memory... 

Fundamentally, the conditions for lasing are detemiined unambiguously once the populations and coherences of the system density matrix are known. Yet, we have been unable to find in the literature any simple criterion for lasing in multilevel systems in temis of the system density matrix alone. Our conjecture is that entropy, as... 

The exact methods employed to prepare any particular surface for study vary from material to material, and are usually detennined empirically. In some respects, sample preparation is more of an art than a science. Thus, it is always best to consult the literature to look for preparation methods before starting with a new material. 

These equations lead to fomis for the thermal rate constants that are perfectly similar to transition state theory, although the computations of the partition functions are different in detail. As described in figrne A3.4.7 various levels of the theory can be derived by successive approximations in this general state-selected fomr of the transition state theory in the framework of the statistical adiabatic chaimel model. We refer to the literature cited in the diagram for details. 

Although the field of gas-phase kinetics remains hill of challenges it has reached a certain degree of maturity. Many of the fiindamental concepts of kinetics, in general take a particularly clear and rigorous fonn in gas-phase kinetics. The relation between fiindamental quantum dynamical theory, empirical kinetic treatments, and experimental measurements, for example of combustion processes [72], is most clearly established in gas-phase kmetics. It is the aim of this article to review some of these most basic aspects. Details can be found in the sections on applications as well as in the literature cited. 

The treatment of equilibrium solvation effects in condensed-phase kmetics on the basis of TST has a long history and the literature on this topic is extensive. As the basic ideas can be found m most physical chemistry textbooks and excellent reviews and monographs on more advanced aspects are available (see, for example, the recent review article by Tnihlar et al [6] and references therein), the following presentation will be brief and far from providing a complete picture. 

One possibility is to use hyperspherical coordinates, as these enable the use of basis fiinctions which describe reagent and product internal states in the same expansion. Hyperspherical coordinates have been extensively discussed in the literature [M, 35 and 36] and in the present application they reduce to polar coordinates (p, p) defined as follows ... 

In this chapter we shall first outline the basic concepts of the various mechanisms for energy redistribution, followed by a very brief overview of collisional intennoleciilar energy transfer in chemical reaction systems. The main part of this chapter deals with true intramolecular energy transfer in polyatomic molecules, which is a topic of particular current importance. Stress is placed on basic ideas and concepts. It is not the aim of this chapter to review in detail the vast literature on this topic we refer to some of the key reviews and books [U, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, and 32] and the literature cited therein. These cover a variety of aspects of tire topic and fiirther, more detailed references will be given tliroiighoiit this review. We should mention here the energy transfer processes, which are of fiindamental importance but are beyond the scope of this review, such as electronic energy transfer by mechanisms of the Forster type [33, 34] and related processes. 

Quack M and Tree J 1976 Unimolecular reactions and energy transfer of highly excited molecules Gas Kinetics and Energy Transfer mo 2, oh 5, ed P G Ashmore and R J Donovan (London The Chemical Society) pp 175-238 (a review of the literature published up to early 1976)... 

The reader must turn to the literature to amplify upon any of these topics. Here we return to the two-colour generatorAVMEL scheme to see how it easily can be adapted to the RRS problem. 

As an illustration, we consider the case of SFIG from the (111) surface of a cubic material (3m. syimnetry). More general treatments of rotational anisotropy in centrosymmetric crystals may be found in the literature [62. 63 and M]- For the case at hand, we may detennine the anisotropy of the radiated SFl field from equation Bl.5.32 in conjunction with the fonn of -)from table Bl.5.1. We fmd, for example, for the p-in/p-out and s-... 

In the literature, the interested reader may find treatment of moleeules with differing, and more eomplex,... 

The spectral frequency range covered by the central lobe of this sinc fiinction increases as the piilselength decreases. For a spectrum to be undistorted it should really be confined to the middle portion of this central lobe (figure B 1.12.2). There are a number of examples in the literature of solid-state NMR where the resonances are in fact broader than the central lobe so that the spectrum reported is only effectively providing infonnation about the RF-irradiation envelope, not the shape of the signal from the sample itself... 

Muns ENDOR mvolves observation of the stimulated echo intensity as a fimction of the frequency of an RE Ti-pulse applied between tlie second and third MW pulse. In contrast to the Davies ENDOR experiment, the Mims-ENDOR sequence does not require selective MW pulses. For a detailed description of the polarization transfer in a Mims-type experiment the reader is referred to the literature [43]. Just as with three-pulse ESEEM, blind spots can occur in ENDOR spectra measured using Muns method. To avoid the possibility of missing lines it is therefore essential to repeat the experiment with different values of the pulse spacing Detection of the echo intensity as a fimction of the RE frequency and x yields a real two-dimensional experiment. An FT of the x-domain will yield cross-peaks in the 2D-FT-ENDOR spectrum which correlate different ENDOR transitions belonging to the same nucleus. One advantage of Mims ENDOR over Davies ENDOR is its larger echo intensity because more spins due to the nonselective excitation are involved in the fomiation of the echo. 

While the stick plot examples already presented show net and multiplet effects as separate phenomena, the two can be observed in the same spectrum or even in the same NMR signal. The following examples from the literature will illustrate real life uses of CIDNP and demonstrate the variety of structural, mechanistic, and spin physics questions which CIDNP can answer. 

---