Supercritical extractable substances

Hamburger, M., Baumann, D., and Adler, S., Supercritical carbon dioxide extraction of selected medicinal plants — effects of high pressure and added ethanol on yield of extracted substances, Phytochem. Anal., 15, 46, 2004. 

Supercritical fluids can be used to extract substances from natural products, as solvents or as anti-solvents to micronize drugs and biodegradable polymers, encapsulate drugs in polymeric matrices, resolve racemic mixtures of pharmacologically active compounds, fractionate mixtures of polymer and proteins, and sterilize bacterial organisms. 

Conditions sometimes exist that may make separations by distillation difficult or impractical or may require special techniques. Natural products such as petroleum or products derived from vegetable or animal matter are mixtures of very many chemically unidentified substances. Thermal instability sometimes is a problem. In other cases, vapor-liquid phase equilibria are unfavorable. It is true that distillations have been practiced successfully in some natural product industries, notably petroleum, long before a scientific basis was established, but the designs based on empirical rules are being improved by modern calculation techniques. Even unfavorable vapor-liquid equilibria sometimes can be ameliorated by changes of operating conditions or by chemical additives. Still, it must be recognized that there may be superior separation techniques in some cases, for instance, crystallization, liquid-liquid extraction, supercritical extraction, foam fractionation, dialysis, reverse osmosis, membrane separation, and others. The special distillations exemplified in this section are petroleum, azeotropic, extractive, and molecular distillations. 

The last two decades have seen an increased interest in the use of supercritical fluids in separation science. Supercritical C02 has often been employed as a naturally occurring medium for the separation, purification, and determination of organic substances in environmental samples. However, there are only limited reports on the use of supercritical fluid as solvent in the separation of metal ions from solutions as well as various solid matrices. The supercritical fluid extraction (SFE) technology offers several advantages over conventional solvent-based methods, including the ability to extract radionuclides directly from solids, easy separation of solutes from C02, and minimization of waste generation. It can easily be removed from the extracted substances by degasification under atmospheric pressure and temperature. 

Supercritical carbon dioxide has a critical temperature of 31°C and a critical pressure of 1070 psi. Carbon dioxide as a cleaning solvent has a number of advantages these include low human toxicity, no waste solvent, low cost, ready availability, complete recovery of extracted agents and extracted substances, environmental acceptability, complete and ready recycling, etc. 

Because of high energy costs and increasing regulation of solvents used in conventional distillation, alternative extraction and crystallization methods are now more frequently used. Furthermore, supercritical extraction combines the characteristics of both distillation and extraction it is efficient, clean, and is able to extract substances which are difficult to separate by other unit operations. Thus it has recently become an attractive possibility for many separations. 

The phenomenological FEOS-model and its consequence - the HPD with the formal particle-hole-type symmetry of a quasibinodal has some specific distinctions from the relevant conventional approaches. First of all, it is based on the continuum, exactly solvable WMG-model of a phase transition without any adjustable parameters. Besides, the study of the novel substances and mixtures can be carried out within the framework of the common FEOS which is applicable to any low-molecular and high-molecular compounds. This property can be quite useful in many applications such as the supercritical extraction or the low-temperature phase transition in the complex mixtures. 

In summary, there exist four modes of operating the supercritical extraction of solid substances. The specific mode employed in any instance is a function of many factors, for example, the sensitivity of the material(s) to temperature and the ease of condensation or nucleation. Many facets and... 

The properties of fluids under supercritical conditions are considered ideal for extracting substances from exhausted activated carbons. Two supercritical fluids are of particular interest, carbon dioxide and water. Carbon dioxide has a low critical temperature of 304 K and a moderate critical pressure of 73 bar, while water has a critical temperature of 647 K and a critical pressure of 220 bar. The character of water at supercritical conditions changes from one that supports only ionic species at ambient conditions to one that dissolves paraffins, aromatics, gases and salts [65]. These supercritical fluids exhibit densities similar to those of liquids (high solvent strengths) and diffusion coefficients similar to those of gases (excellent transport characteristics), enabling them to effectively dissolve and/or desorb contaminants from the carbon surface and to easily enter/exit even the smallest pores and carry away any... 

Extract substances using supercritical CO2 (e.g. caffeine from coffee beans, hop extracts)... 

The extractable substances are transferred to the supercritical solvent and are successively removed from the extractor, in which a separation step takes place, of the constituents dissolved in the supercritical solvent, from the reduction in density with decreasing pressure or increasing temperature. However, the separation technique used to extract compounds depends on the nature of the components involved. 

Supercritical Fluid Extraction. Supercritical fluid (SCF) extraction is a process in which elevated pressure and temperature conditions are used to make a substance exceed a critical point. Once above this critical point, the gas (CO2 is commonly used) exhibits unique solvating properties. The advantages of SCF extraction in foods are that there is no solvent residue in the extracted products, the process can be performed at low temperature, oxygen is excluded, and there is minimal protein degradation (49). One area in which SCF extraction of Hpids from meats maybe appHed is in the production of low fat dried meat ingredients for further processed items. Its apphcation in fresh meat is less successful because the fresh meat contains relatively high levels of moisture (50). 

FoodApphca.tlons, Carbon dioxide, a nontoxic material, can be used to extract thermally labde food components at near-ambient temperatures. The food product is thus not contaminated with residual solvent, as is potentially the case when usiag coaveatioaal Hquid solveats such as methylene chloride or hexane. In the food iadustry, CO2 is not recorded as a foreign substance or additive. Supercritical solvents not only can remove oils, caffeiae, or cholesterol from food substrates, but can also be used to fractionate mixtures such as glycerides and vegetable oils iato aumerous compoaeats. 

The development of methods of analysis of tria2ines and thek hydroxy metabohtes in humic soil samples with combined chromatographic and ms techniques has been described (78). A two-way approach was used for separating interfering humic substances and for performing stmctural elucidation of the herbicide traces. Humic samples were extracted by supercritical fluid extraction and analy2ed by both hplc/particle beam ms and a new ms/ms method. The new ms /ms unit was of the tandem sector field-time-of-flight/ms type. 

Adsorption and Desorption Adsorbents may be used to recover solutes from supercritical fluid extracts for example, activated carbon and polymeric sorbents may be used to recover caffeine from CO9. This approach may be used to improve the selectivity of a supercritical fluid extraction process. SCF extraction may be used to regenerate adsorbents such as activated carbon and to remove contaminants from soil. In many cases the chemisorption is sufficiently strong that regeneration with CO9 is limited, even if the pure solute is quite soluble in CO9. In some cases a cosolvent can be added to the SCF to displace the sorbate from the sorbent. Another approach is to use water at elevated or even supercritical temperatures to facilitate desorption. Many of the principles for desorption are also relevant to extraction of substances from other substrates such as natural products and polymers. 

Supercritical fluid extraction (SFE) has been extensively used for the extraction of volatile components such as essential oils, flavours and aromas from plant materials on an industrial as well as an analytical scale (61). The extract thus obtained is usually analysed by GC. Off-line SFE-GC is frequently employed, but on-line SEE-GC has also been used. The direct coupling of SEE with supercritical fluid chromatography (SEC) has also been successfully caried out. Coupling SEE with SEC provides several advantages for the separation and detection of organic substances low temperatures can be used for both SEE and SEC, so they are well suited for the analysis of natural materials that contain compounds which are temperature-sensitive, such as flavours and fragrances. 

Above the critical temperature and pressure, a substance is referred to as a supercritical fluid. Such fluids have unusual solvent properties that have led to many practical applications. Supercritical carbon dioxide is used most commonly because it is cheap, nontoxic, and relatively easy to liquefy (critical T = 31°C, P = 73 atm). It was first used more than 20 years ago to extract caffeine from coffee dichloromethane, CH2C12, long used for this purpose, is both a narcotic and a potential carcinogen. Today more than 10s metric tons of decaf coffee are made annually using supercritical C02. It is also used on a large scale to extract nicotine from tobacco and various objectionable impurities from the hops used to make beer. 

The dense fluid that exists above the critical temperature and pressure of a substance is called a supercritical fluid. It may be so dense that, although it is formally a gas, it is as dense as a liquid phase and can act as a solvent for liquids and solids. Supercritical carbon dioxide, for instance, can dissolve organic compounds. It is used to remove caffeine from coffee beans, to separate drugs from biological fluids for later analysis, and to extract perfumes from flowers and phytochemicals from herbs. The use of supercritical carbon dioxide avoids contamination with potentially harmful solvents and allows rapid extraction on account of the high mobility of the molecules through the fluid. Supercritical hydrocarbons are used to dissolve coal and separate it from ash, and they have been proposed for extracting oil from oil-rich tar sands. 

Supercritical fluid extraction (SFE) is generally used for the extraction of selected analytes from solid sample matrices, but applications have been reported for aqueous samples. In one study, recoveries of 87-100% were obtained for simazine, propazine, and trietazine at the 0.05 ug mL concentration level using methanol-modified CO2 (10%, v/v) to extract the analytes, previously preconcentrated on a C-18 Empore extraction disk. The analysis was performed using LC/UV detection. Freeze-dried water samples were subjected to SFE for atrazine and simazine, and the optimum recoveries were obtained using the mildest conditions studied (50 °C, 20 MPa, and 30 mL of CO2). In some cases when using LEE and LC analysis, co-extracted humic substances created interference for the more polar metabolites when compared with SFE for the preparation of the same water sample. ... 

There are basically three methods of liquid sampling in GC direct sampling, solid-phase extraction and liquid extraction. The traditional method of treating liquid samples prior to GC injection is liquid-liquid extraction (LLE), but several alternative methods, which reduce or eliminate the use of solvents, are preferred nowadays, such as static and dynamic headspace (DHS) for volatile compounds and supercritical fluid extraction (SFE) and solid-phase extraction (SPE) for semivolatiles. The method chosen depends on concentration and nature of the substances of interest that are present in the liquid. Direct sampling is used when the substances to be assayed are major components of the liquid. The other two extraction procedures are used when the pertinent solutes are present in very low concentration. Modem automated on-line SPE-GC-MS is configured either for at-column conditions or rapid large-volume injection (RLVI). 

This state emphasises its capacity to dissolve chemicals and natural substances of similar way as do different organic solvents such as hexane, acetone or dichloromethane. Therefore, the first applications focused on the extraction of natural substances as an alternative to using organic solvents. Thus, removal of caffeine (coffee or tea) with supercritical C02 is the most mature application at industrial level and is also used in the extraction of hops or cocoa fat. 

Supercritical C02 extraction coupled with a fractional separation technique is used by producers of flavours and fragrances to separate and purify volatile flavour and fragrance concentrates. Like any solvent, supercritical C02, it allows processing chemicals by predpita-tion or recrystallisation, obtaining partides of controlled size and shape, without excessive fines without thermal stresses and controlling the shape of a polymorphic substance. 

---