Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Major components

C22H34O2. A straight-chain fatty acid with 5 double bonds. A major component of fish oils and the oils of marine animals, clupeine Protamine class protein found in the sperm and testicles of the herring. On hydrolysis it gives about 90% of argenine. [Pg.102]

Figure 29, The effect of the phase-preserving component of the degenerate 2 distorting mode, It may be regarded as a major component of the reaction coordinate that leads to the A] structure (going left, one phase of the mode). Going right, the other phase of the same vibration, the B2 state is formed. (A type-V structure is also obtained along the same coordinate). Figure 29, The effect of the phase-preserving component of the degenerate 2 distorting mode, It may be regarded as a major component of the reaction coordinate that leads to the A] structure (going left, one phase of the mode). Going right, the other phase of the same vibration, the B2 state is formed. (A type-V structure is also obtained along the same coordinate).
Besides these three major components, many expert systems also comprise an explanation subsystem and a knowledge acquisition subsystem,... [Pg.479]

But, safrole is the major component of the essential oil of sassafras which is still quite legal to obtain. Sassafras oil has a strong licorice smell which is imparted to it from the safroie molecule. Commercially, there are two kinds of sassafras... [Pg.30]

Accompanying this text is a CD entitled Learning By Modeling As its name implies it is a learning tool designed to help you better understand molecular structure and properties and contains two major components... [Pg.29]

Allyl IS derived from the botanical name for garlic Allium sativum) It was found in 1892 that the major component obtained by distilling garlic oil is H2C=CHCH2SSCH2CH=CH2 and the word a//y/was coined for the H2C=CHCH2— group on the basis of this origin... [Pg.390]

Isopropyl alcohol is prepared from petroleum by hydration of propene With a boil mg point of 82°C isopropyl alcohol evaporates quickly from the skin producing a cool mg effect Often containing dissolved oils and fragrances it is the major component of rubbing alcohol Isopropyl alcohol possesses weak antibacterial properties and is used to maintain medical instruments m a sterile condition and to clean the skin before minor surgery... [Pg.624]

Section 19 9 Carbon dioxide and carbonic acid are m equilibrium m water Carbon dioxide IS the major component... [Pg.822]

Clathrate (Section 2 5) A mixture of two substances in which molecules of the minor component are held by van der Waals forces within a framework of molecules of the major component... [Pg.1279]

A cmde acetone product is recovered by distillation from the reaction mass. One or two additional distillation columns may be required to obtain the desired purity. If two columns are used, the first tower removes impurities such as acetaldehyde and propionaldehyde. The second tower removes undesired heavies, the major component being water. [Pg.96]

The components of the diaphragm, membrane, and mercury cell voltages presented ia Table 8 show that, although the major component of the cell voltage is the term, ohmic drops also contribute to the irreversible energy losses duting the operation of the cells. [Pg.485]

Table 59. Major Components of Ylang-Ylang Oils ... Table 59. Major Components of Ylang-Ylang Oils ...
In several important cases, new synthetic strategies have been developed into new production schemes. An outstanding example of this is the production of an entire family of terpene derivatives from a-pinene (29), the major component of most turpentines, via linalool (3) (12). Many of these materials had been produced from P-pinene, a lesser component of turpentine, via pyrolysis to myrcene and further chemical processing. The newer method offers greater manufacturing dexibiUty and better economics, and is environmentally friendly in that catalytic air oxidation is used to introduce functionality. [Pg.85]

Most common analytical methods for analysis of the major component or minor components of organic products are used for pyridines. These include gas chromatography, titration, free2ing point, nmr, in, hplc, and gc/ms. [Pg.334]

The major components of camauba wax are aHphatic and aromatic esters of long-chain alcohols and acids, with smaller amounts of free fatty acids and alcohols, and resins. Camauba wax is very hard, with a penetration of 2 dmm at 25°C and only 3 dmm at 43.3°C. Camauba also has one of the higher melting points for the natural waxes at 84°C, with a viscosity of 3960 rare]/s at 98.9°C, an acid number of 8, and a saponification number of 80. [Pg.314]

The major components of candelilla wax are hydrocarbons, esters of long-chain alcohols and acids, long-chain alcohols, sterols, and neutral resins, and long-chain acids. Typically, candelilla wax has a melting point of 70°C, a penetration of 3 drum at 25°C, an acid number of 14, and a saponification number of 55. Principal markets for candelilla include cosmetics, foods, and pharmaceuticals. The FDA affirmed Candelilla as GRAS for certain food apphcations in 21 CFR 184.1976. [Pg.315]

The major component of the oil extracted from bell peppers has been shown, initially on the basis of mass spectral studies but subsequently by total synthesis, to be 2-methoxy-3-... [Pg.192]

Since the electrophilic reagent attacks the multiply-bonded nitrogen atom, as shown for (68) and (69), the orientation of the reaction product is related to the tautomeric structure of the starting material. However, any conclusion regarding tautomeric equilibria from chemical reactivity can be misleading since a minor component can react preferentially and then be continually replenished by isomerization of the major component. [Pg.48]

FIG. 9-44 Typical h reakdown of chemical-plant costs hy major component. [Pg.876]

The chief advantage of packing over other types of seals is the ease with which it can be adjusted or replaced. Most equipment is designed so that disassembly of major components is not required to... [Pg.940]

Single-effec t indirect-fired lithium bromide cycle is shown in Fig. 11-99. The machine consists of five major components ... [Pg.1118]

The agitated flash dryer (Fig. 12-106) consists of four major components feed system, drying chamber, heater, and exhaust air system. [Pg.1238]

Aerial parts of N. sintenisii yielded 0.3% of a clear yellowish oil. Forty constituents (96.5% of the total oil) were identified. The main components were 4aP,7a,7aP-nepetalactone (23.4%), elemol (16.1%), E- -farnesene (9.5%), 1,8-cineole (8.2%), cw-sabinene hydrate (6.5%), P-bisabolene (4.2%), germacrene-D (3.5%), P-sesquiphellandrene (2.8%), P-bourbonene (1.5%) and a-epi-cadinol (1.3%). According to available data, Nepeta species can be divided into two groups of nepetalactone-containing and nepetalactone-free species. The results of this study indicate that the compositions of volatile oil of N. sintenisii are similar to the other Nepeta genus and this plant could be classified in the group which 4aP,7a,7aP-nepetalactone is the major component of their oils. [Pg.232]

Ferric and ferrous hydroxide usually contain water of hydration. A layer of hydrated magnetite sometimes forms between the ferric and ferrous hydroxides (see Fig. 3.2). The threefold layer of corrosion products is usually called rust. The bulk of rust is the ferric hydroxide layer. (In tubercles, however, ferrous hydroxide often is the major component see Chap. 3.)... [Pg.100]

A power system is connected to a number of power supply machines that determine the fault level of that. system (e.g. generators and transformers). The impedances of all such equipment and the impedances of the interconnecting cables and overhead lines etc. are the parameters that limit the fault level of the system. For ease of calculation, when determining the fault level of such a system it is essential to consider any one major component as the base and convert the relevant parameters of the other equipment to that base, for a quicker calculation, to establish the required fault level. Below we provide a few common formulae for the calculation of faults on a p.u. basis. For more details refer to a textbook in the references. [Pg.356]


See other pages where Major components is mentioned: [Pg.346]    [Pg.922]    [Pg.1313]    [Pg.2382]    [Pg.2785]    [Pg.182]    [Pg.29]    [Pg.360]    [Pg.231]    [Pg.245]    [Pg.455]    [Pg.314]    [Pg.278]    [Pg.1106]    [Pg.1119]    [Pg.1133]    [Pg.2244]    [Pg.2535]    [Pg.2554]    [Pg.359]    [Pg.67]    [Pg.452]    [Pg.12]    [Pg.131]    [Pg.247]    [Pg.304]   
See also in sourсe #XX -- [ Pg.27 ]

See also in sourсe #XX -- [ Pg.27 ]

See also in sourсe #XX -- [ Pg.319 ]

See also in sourсe #XX -- [ Pg.229 ]




SEARCH



© 2024 chempedia.info