Empore extraction disk

Supercritical fluid extraction (SFE) is generally used for the extraction of selected analytes from solid sample matrices, but applications have been reported for aqueous samples. In one study, recoveries of 87-100% were obtained for simazine, propazine, and trietazine at the 0.05 ug mL concentration level using methanol-modified CO2 (10%, v/v) to extract the analytes, previously preconcentrated on a C-18 Empore extraction disk. The analysis was performed using LC/UV detection. Freeze-dried water samples were subjected to SFE for atrazine and simazine, and the optimum recoveries were obtained using the mildest conditions studied (50 °C, 20 MPa, and 30 mL of CO2). In some cases when using LEE and LC analysis, co-extracted humic substances created interference for the more polar metabolites when compared with SFE for the preparation of the same water sample. ... 

The use of SPE disks represents a relatively new SPE approach for the rapid and efficient isolation of pesticides from aqueous samples. Empore extraction disks have approximately 10 times the cross-sectional area of conventional SPE cartridges with comparable solvent mass (500 mg). The dense packing and uniform particle... 

Filter IL of water sample through a filter paper. Place an Empore extraction disk in a Millipore extraction funnel. Rinse the disk with 10 mL of ethyl acetate, dichloromethane, and acetonitrile, successively. Dry the disk under vacuum and then rinse the disk with 10 mL of methanol and 20 mL of deionized water by vacuum filtration. Pass the prefiltered sample through the disk and elute alanycarb with two portions of 10 mL of acetonitrile. Transfer the eluates through anhydrous sodium sulfate into a 50-mL flask. Remove acetonitrile by rotary evaporation. Dissolve the residue in 1 mL of acetonitrile. 

TOOOl 3M Company, 3M Empore Extraction Disk T0124 BioTrol, Inc., Soil Washing Technology T0161 Chemical Oxidation—General... 

---