Poly preparation

DTA curves of C-S-H(I) preparations show endotherms at I00-200 C and exotherms at 835-900°C, the latter temperatures increasing with Ca/Si ratio (KI7). C-S-H(di,poly) preparations gave somewhat similar results (S46), but the temperature of the exotherm varied erratically with Ca/Si ratio and, except at Ca/Si = 0.8, an additional endotherm occurred at 332-372°C. Solvents that dissolve lime, such as ethyl acetoacetate, have little action on preparations with Ca/Si ratios of 1.25-1.33, but remove CaO from ones of higher Ca/Si ratio until that composition is reached (K17,S46). 

Prepared generally by ester interchange from polyvinylacelate (ethanoate) using methanol and base also formed by hydrolysis of the acetate by NaOH and water. The properties of the poly(vinyl alcohol) depend upon the structure of the original polyvinyl acetate. Forms copolymers. Used as a size in the textile industry, in aqueous adhesives, in the production of polyvinyl acetates (e.g. butynal) for safety glasses. U.S. production 1980... 

Anti L, Goodwin J W, Flill R D, Ottewill R FI, Owens S M, Papworth S and Waters J A 1986 The preparation of poly (methyl methaorylate) lattioes in non-aqueous media Colloid Surf. 17 67-78... 

Di- and poly-halogenated aliphatic hydrocarbons. No general procedure can be given for the preparation of derivatives of these compounds. Reliance must be placed upon their physical properties (b.p., density and refractive index) and upon any chemical reactions which they undergo. 

Polyphenylene polymers can be prepared by this coupling. For example, the preparation of poly(/i-quaterphenylene-2,2 -dicarboxylic acid) (643) was carried out using aqueous NaHCO and a water-soluble phosphine ligand (DPMSPP)[5I I]. Branched polyphenylene was also prepared[5l2). 

Diisocyanobenzene (130) undergoes living polymerization to form the poly(quinoxaline-2,3-diyl)s 131, and the optically active helical polyfquinoxa-line-2,3-diyl) 132 is prepared from 131[123]. 

Vinyl chloride is an industrial chemical produced in large amounts (10 ° Ib/year in the United States) and is used in the preparation of poly(vmyl chloride) Poly(vinyl chio ride) often called simply vinyl has many applications including siding for houses wall coverings and PVC piping... 

ETHYLENE We discussed ethylene production in an earlier boxed essay (Section 5 1) where it was pointed out that the output of the U S petrochemi cal industry exceeds 5 x 10 ° Ib/year Approximately 90% of this material is used for the preparation of four compounds (polyethylene ethylene oxide vinyl chloride and styrene) with polymerization to poly ethylene accounting for half the total Both vinyl chloride and styrene are polymerized to give poly(vinyl chloride) and polystyrene respectively (see Table 6 5) Ethylene oxide is a starting material for the preparation of ethylene glycol for use as an an tifreeze in automobile radiators and in the produc tion of polyester fibers (see the boxed essay Condensation Polymers Polyamides and Polyesters in Chapter 20)... 

As the demand for rubber increased so did the chemical industry s efforts to prepare a synthetic sub stitute One of the first elastomers (a synthetic poly mer that possesses elasticity) to find a commercial niche was neoprene discovered by chemists at Du Pont in 1931 Neoprene is produced by free radical polymerization of 2 chloro 1 3 butadiene and has the greatest variety of applications of any elastomer Some uses include electrical insulation conveyer belts hoses and weather balloons... 

Poly(vinyl alcohol) is a useful water soluble polymer It cannot be prepared directly from vinyl alcohol because of the rapidity with which vinyl alcohol (H2C=CHOH) isomenzes to acetaldehyde Vinyl acetate however does not rearrange and can be polymerized to poly(vinyl acetate) How could you make use of this fact to prepare poly(vinyl alcohol)" ... 

Polylmethyl Methacrylate). The monomer used for poly(methyl methacrylate), 2-hy-droxy-2-methylpropanenitrile, is prepared by the following reaction ... 

Poly (methyl Acrylate). The monomer used for preparing poly(methyl acrylate) is produced by the oxidation of propylene. The resin is made by free-radical polymerization initiated by peroxide or azo catalysts and has the following formula ... 

Poly(tetmfluoroethylene). Poly(tetrafluoroethylene) is prepared from tetrafluoroethy-lene and consists of repeating units in a predominantly linear chain ... 

Poly(butylene Terephthalate). Poly(butylene terephthalate) is prepared in a condensation reaction between dimethyl terephthalate and 1,4-butanediol and its repeating unit has the general structure... 

When a 0.8006-g sample of a poly(styrene/maleic anhydride) copolymer was prepared in the same manner, the following results were obtained... 

Ester interchange reactions are valuable, since, say, methyl esters of di-carboxylic acids are often more soluble and easier to purify than the diacid itself. The methanol by-product is easily removed by evaporation. Poly (ethylene terephthalate) is an example of a polymer prepared by double application of reaction 4 in Table 5.3. The first stage of the reaction is conducted at temperatures below 200°C and involves the interchange of dimethyl terephthalate with ethylene glycol... 

It is not the purpose of this book to discuss in detail the contributions of NMR spectroscopy to the determination of molecular structure. This is a specialized field in itself and a great deal has been written on the subject. In this section we shall consider only the application of NMR to the elucidation of stereoregularity in polymers. Numerous other applications of this powerful technique have also been made in polymer chemistry, including the study of positional and geometrical isomerism (Sec. 1.6), copolymers (Sec. 7.7), and helix-coil transitions (Sec. 1.11). We shall also make no attempt to compare the NMR spectra of various different polymers instead, we shall examine only the NMR spectra of different poly (methyl methacrylate) preparations to illustrate the capabilities of the method, using the first system that was investigated by this technique as the example. 

Figure 7.10 shows the 60-MHz spectra of poly (methyl methacrylate) prepared with different catalysts so that predominately isotactic, syndiotactic, and atactic products are formed. The three spectra in Fig. 7.10 are identified in terms of this predominant character. It is apparent that the spectra are quite different, especially in the range of 5 values between about 1 and 2 ppm. Since the atactic polymer has the least regular structure, we concentrate on the other two to make the assignment of the spectral features to the various protons. 

The solute molecular weight enters the van t Hoff equation as the factor of proportionality between the number of solute particles that the osmotic pressure counts and the mass of solute which is known from the preparation of the solution. The molecular weight that is obtained from measurements on poly disperse systems is a number average quantity. 

The sedimentation and diffusion coefficients for three different preparations of poly(methyl methacrylate) were measuredf in /i-butyl chloride at 35.6 C (= 0) and in acetone at 20 C (> 0) and the following results were obtained ... 

Poly(acrylic acid) and Poly(methacrylic acid). Poly(acryHc acid) (8) (PAA) may be prepared by polymerization of the monomer with conventional free-radical initiators using the monomer either undiluted (36) (with cross-linker for superadsorber appHcations) or in aqueous solution. Photochemical polymerization (sensitized by benzoin) of methyl acrylate in ethanol solution at —78° C provides a syndiotactic form (37) that can be hydrolyzed to syndiotactic PAA. From academic studies, alkaline hydrolysis of the methyl ester requires a lower time than acid hydrolysis of the polymeric ester, and can lead to oxidative degradation of the polymer (38). Po1y(meth acrylic acid) (PMAA) (9) is prepared only by the direct polymerization of the acid monomer it is not readily obtained by the hydrolysis of methyl methacrylate. 

Cationic monomers are used to enhance adsorption on waste soHds and faciHtate flocculation (31). One of the first used in water treatment processes (10) is obtained by the cyclization of dimethyldiallylammonium chloride in 60—70 wt % aqueous solution (43) (see Water). Another cationic water-soluble polymer, poly(dimethylarnine-fi9-epichlorohydrin) (11), prepared by the step-growth... 

One product is poly(2-ethyl-2-oxa2oline) (PEOX). It is prepared by the ring-opening polymerization of 2-ethyl-2-oxazoline (19) with a cationic initiator (48) (eq. 6). 

Other fairly recent commercial products, poly(vinyl amine) and poly(vinyl amine vinyl alcohol), have addressed the need for primary amines and their selective reactivity. Prior efforts to synthesize poly(vinyl amine) have been limited because of the difficulty hydrolyzing the intermediate polymers. The current product is prepared from /V-ethenylformamide (20) formed from the reaction of acetaldehyde and formamide. The vinyl amide is polymerized with a free-radical initiator, then hydrolyzed (eq. 7). 

VDP Polyimides. Polyimide films have also been prepared by a kind of VDP (16). The poly(amic acid) layer is first formed by the coevaporation and condensation of two monomers, followed by copolymerization on the substrate. The imidization is carried out in a separate baking step (see POLYIMIDES). 

---