Neutron activation analysi

Neutron Activation Analysis Few samples of interest are naturally radioactive. For many elements, however, radioactivity may be induced by irradiating the sample with neutrons in a process called neutron activation analysis (NAA). The radioactive element formed by neutron activation decays to a stable isotope by emitting gamma rays and, if necessary, other nuclear particles. The rate of gamma-ray emission is proportional to the analyte s initial concentration in the sample. For example, when a sample containing nonradioactive 13AI is placed in a nuclear reactor and irradiated with neutrons, the following nuclear reaction results. 

The concentration of Mn in steel can be determined by a neutron activation analysis using the method of external standards. A 1.000-g sample of an unknown steel sample and a 0.950-g sample of a standard steel known to contain 0.463% w/w Mn, are irradiated with neutrons in a nuclear reactor for 10 h. After a 40-min cooling period, the activities for gamma-ray emission were found to be 2542 cpm (counts per minute) for the unknown and 1984 cpm for the standard. What is the %w/w Mn in the unknown steel sample ... 

Methods for iodine deterrnination in foods using colorimetry (95,96), ion-selective electrodes (94,97), micro acid digestion methods (98), and gas chromatography (99) suffer some limitations such as potential interferences, possibHity of contamination, and loss during analysis. More recendy neutron activation analysis, which is probably the most sensitive analytical technique for determining iodine, has also been used (100—102). 

Numerous methods have been pubUshed for the determination of trace amounts of tellurium (33—42). Instmmental analytical methods (qv) used to determine trace amounts of tellurium include atomic absorption spectrometry, flame, graphite furnace, and hydride generation inductively coupled argon plasma optical emission spectrometry inductively coupled plasma mass spectrometry neutron activation analysis and spectrophotometry (see Mass spectrometry Spectroscopy, optical). Other instmmental methods include polarography, potentiometry, emission spectroscopy, x-ray diffraction, and x-ray fluorescence. 

Thermal neutron activation analysis has been used for archeological samples, such as amber, coins, ceramics, and glass biological samples and forensic samples (see Forensic chemistry) as weU as human tissues, including bile, blood, bone, teeth, and urine laboratory animals geological samples, such as meteorites and ores and a variety of industrial products (166). 

MetaUic impurities in beryUium metal were formerly determined by d-c arc emission spectrography, foUowing dissolution of the sample in sulfuric acid and calcination to the oxide (16) and this technique is stUl used to determine less common trace elements in nuclear-grade beryUium. However, the common metallic impurities are more conveniently and accurately determined by d-c plasma emission spectrometry, foUowing dissolution of the sample in a hydrochloric—nitric—hydrofluoric acid mixture. Thermal neutron activation analysis has been used to complement d-c plasma and d-c arc emission spectrometry in the analysis of nuclear-grade beryUium. 

Instiximental neutron activation analysis (INAA) is considered the most informative and highly sensitive. Being applied, it allows detecting and determination of 30-40 elements with the sensitivity of 10 -10 g/g in one sample. The evident advantage of INAA is the ability to analyze samples of different nature (filters, soils, plants, biological tests, etc.) without any complex schemes of preliminai y prepai ation. 

Neutron Activation Analysis (NAA) is one of the analytical methods recommended for low level Mo determination in biological materials. 

Thorinm-232 is the only non-radiogenic thorium isotope of the U/Th decay series. Thorinm-232 enters the ocean by continental weathering and is mostly in the particulate form. Early measurements of Th were by alpha-spectrometry and required large volume samples ca. 1000 T). Not only did this make sample collection difficult, but the signal-to-noise ratio was often low and uncertain. With the development of a neutron activation analysis " and amass spectrometry method " the quality of the data greatly improved, and the required volume for mass spectrometry was reduced to less than a liter. Surface ocean waters typically have elevated concentrations of dissolved and particulate 17,3 7,62... 

The chemical composition of particulate pollutants is determined in two forms specific elements, or specific compounds or ions. Knowledge of their chemical composition is useful in determining the sources of airborne particles and in understanding the fate of particles in the atmosphere. Elemental analysis yields results in terms of the individual elements present in a sample such as a given quantity of sulfur, S. From elemental analysis techniques we do not obtain direct information about the chemical form of S in a sample such as sulfate (SO/ ) or sulfide. Two nondestructive techniques used for direct elemental analysis of particulate samples are X-ray fluorescence spectroscopy (XRF) and neutron activation analysis (NAA). 

Atomic absorption spectroscopy of VPD solutions (VPD-AAS) and instrumental neutron activation analysis (INAA) offer similar detection limits for metallic impurities with silicon substrates. The main advantage of TXRF, compared to VPD-AAS, is its multielement capability AAS is a sequential technique that requires a specific lamp to detect each element. Furthermore, the problem of blank values is of little importance with TXRF because no handling of the analytical solution is involved. On the other hand, adequately sensitive detection of sodium is possible only by using VPD-AAS. INAA is basically a bulk analysis technique, while TXRF is sensitive only to the surface. In addition, TXRF is fast, with an typical analysis time of 1000 s turn-around times for INAA are on the order of weeks. Gallium arsenide surfaces can be analyzed neither by AAS nor by INAA. 

All the techniques discussed here involve the atomic nucleus. Three use neutrons, generated either in nuclear reactors or very high energy proton ajccelerators (spallation sources), as the probe beam. They are Neutron Diffraction, Neutron Reflectivity, NR, and Neutron Activation Analysis, NAA. The fourth. Nuclear Reaction Analysis, NRA, uses charged particles from an ion accelerator to produce nuclear reactions. The nature and energy of the resulting products identify the atoms present. Since NRA is performed in RBS apparatus, it could have been included in Chapter 9. We include it here instead because nuclear reactions are involved. 

Neutron Activation Analysis Instrumental Neutron Activation Analysis... 

The HFBR at Brookhaven National Laboratory is a heavy water moderated and cooled reactor designed to provide an intense beam of neutrons to the experimental area. In addition using thimbles i oiitaincd within the vessel, it provides isotopic production, neutron activation analysis, ami muiemi irradiations. It began operation in 1965 at a power of 40 MW to be upgraded to 60 MW m 19S2. 

The neutron activation analysis of the polymer reveals that initiation is effected predominantly by chlorine atoms. No retardation or inhibition were detected,... 

Neutron activation analysis of a polymer suggests that when Py is used as the electron doner (D), the initiation proceeds through the Cl atom, but when D = DMSO, both Cr and DMSO residues are the primary radicals produced from the photoexcited ion-pair complex. The following reaction scheme is proposed ... 

Nitronium tetrafluoroborate is very hygroscopic. It is stable as long as it is anhydrous, but it is decomposed by moisture, and all transfers should be in a dry box. Its purity can be checked by conventional elemental analysis. However, because of the hygroscopic nature of the salt, the submitters have found it convenient to use neutron activation analysis (B, F, N, O) of samples... 

Radioactive nuclei are used extensively in chemical analysis. One technique of particular importance is neutron activation analysis. This procedure depends on the phenomenon of induced radioactivity. A sample is bombarded by neutrons, bringing about such reactions as... 

In the modern forensic chemistry laboratory (Figure B) arsenic is detected by analysis of hair samples, where the element tends to concentrate in chronic arsenic poisoning. A single strand of hair is sufficient to establish the presence or absence of the element. The technique most commonly used is neutron activation analysis, described in Chapter 19. If the concentration found is greater than about 0.0003%, poisoning is indicated normal arsenic levels are much lower than this. 

Harbottle, G. Neutron Activation Analysis in Archaeological Chemistry. 157,57-92 (1990). 

Comparison of Various FNAA Techniques for Assay of Synthetic Octol Samples Precision of Single-Axis Rotation FNAA for Assay of Octol Plant Samples Fast Neutron Activation Analysis for Nitrogen in Explosives by... 

---