Hazard Communication purpose

Epidemiology Epidemiological information on workers exposed to a product during its manufacture may provide insights for hazard communication purposes. Epidemiological studies by others on individual substances in a product may also be important. 

Chemical manufacturers, importers and employers evaluating chemicals shall treat the following sources as establishing that a chemical is a carcinogen or potential carcinogen for hazard communication purposes ... 

Once a substance has been classified, the hazard(s) must be communicated to target audiences. The main tools of chemical hazard communication are labels and MSDSs (sometimes called Safety Data Sheets (SDSs) and Material Data Sheets (MDSs)) that contain the hazard information. Their purpose is to identify the hazardous properties of chemicals that may constitute a health, property, or environmental risk during normal handling or use. 

The Society s purpose has always been to educate and provide information on hazard communication. Professional development courses were first offered by SCHC in 1990 with a single half-day course. Today, the society offerings have grown to over 25 professional development courses including basic, advanced, and in-depth multiday courses. Continuing education/maintenance points can be obtained for SCHC courses. 

The main purpose of the MSDS is to make employees fuUy aware of any hazards associated with materials they use or handle, as requested by the Hazard Communication Standard, in compliance with the Occupational Safety and Health Administration s (OSHA) regulations. 

Furthermore, whatever the particular safety process — management involvement, safety in the design stages, employee training, hazards communication, incident investigation, use of personal protective equipment, behavior modification, and so on—its fundamental purpose is to avoid, eliminate, or control hazards. 

The purpose of this section is to ensure that the hazards of all chemicals produced or imported are evaluated, and that information concerning their hazards is transmitted to employers and employees. This transmittal of information is to be accomplished by means of comprehensive hazard communication programs, which are to include container labeling and other forms of warning, material safety data sheets, and employee training. 

As stated in the section on the hazard communication standard. Section VII.B of this chapter, OSHA defines health effects, for the purposes of the standard, in Appendix A to 29 CFR 1910.1200. The definitions given below are from that appendix. The laboratory safety standard also specifically suggests using these same definitions for guidance in defining hazardous... 

An information sheet on properties of a material that meet certain combustible, toxic, or other hazardous threshold properties that are specified by the Environmental Protection Agency regulation Title III of the Superfund Amendment and Reauthorization Act (SARA). They also contain emergency and first aid procedures for the specified material. MSDSs are required to be provided and maintained by organizations that have hazardous materials. They are also required to provide copies to the local fire department for the purposes of fire fighter protection and preplanning. See also Hazard Communication (HAZCOM) Hazardous Material SARA Title III. 

Employee notification. Any information concerning the chemical, physical, and toxicologic properties of each substance known or expected to be present on site that is available to the employer and relevant to the duties an employee is expected to perform shall be made available to the affected employees prior to the commencement of their work activities. The employer may utilize information developed for the hazard communication standard for this purpose. 

What is the purpose of OSHA s hazard communication standard ... 

The purpose of this program is to comply with the OSHA Hazard Communication Standard 29 CFR 1910.1200. The purpose of this program is also to ensure that all individuals who are affected by this program are provided with the information necessary to protect themselves and others from injury and illness when working with hazardous chemicals. 

A properly conducted training program will ensure comprehension and rmderstanding. It is not sufficient to either just read material to the trainees, or simply hand them material to read. You want to create a climate where workers feel free to ask questions. This will help you to ensure that the information is understood. Always remember that the rmderly-ing purpose of hazard communication is to reduce the incidence of chemical som ce illnesses and injuries. 

The first thing discussed in this chapter is a written program for hazard communication that is going to be important in staying in compliance with the requirements set forth by the OSHA standard. The specific methods described are used as a sample written program, and are for illustrative purposes and not intended to make up your entire program. Other effective methods can be substituted into this sample to satisfy the needs of the company for which you are working. 

Employee training and information. As stated before, each employee must be trained in the use and potential hazards of every hazardous substance they may come into contact with in the workplace. This training is intended to inform employees about the hazards of the chemicals that they use in their jobs. Employees must also be trained to recognize hazardous substances that may be accidentally released (spill, leak, etc.), and to protect themselves from these hazards. The training must explain the purpose of the hazard communication program, how to read labels and MSDS s, where to find MSDS s... 

The purpose of a hazard communication program is to comply with the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard 29 CFR 1910.1200 and to warn employees about hazardous chemicals and substances in the workplace. ... 

Overview of the hazard communication program — purpose of the program Primary, secondary, portable, and stationary process container labeling requirements... 

The purpose of the Hazard Communication Standard (HCS) is to create an awareness of hazardous chemicals in the workplace. Also, the law allows for appropriate precautionary measures that workers may take for their personal protection. 

The purpose of chemical processes is not to make chemicals The purpose is to make money. However, the profit must he made as part of a sustainable industrial activity which retains the capacity of ecosystems to support industrial activity and life. This means that process waste must be taken to its practical and economic minimum. Relying on methods of waste treatment is usually not adequate, since waste treatment processes tend not so much to solve the waste problem but simply to move it from one place to another. Sustainable industrial activity also means that energy consumption must be taken to its practical and economic minimum. Chemical processes also must not present significant short-term or long-term hazards, either to the operating personnel or to the community. 

Quantitative Fire and Explosion Index (FExplosion Index Hazard Classification Guide, 1994 Lees, 1980, pp. 149-160). The F EI is used to rate the potential of hazard from fires and explosions. Its purpose is to quantify damage from an incident. It identifies equipment that could contribute to an incident and ways to mitigate possible incidents. It is a way to communicate to management the quantitative hazard potential. 

This series of prohibitions restricts how wastes subject to LDR requirements are handled. The most visible aspect of the LDR program is the disposal prohibition, which includes treatment standards, variances, alternative treatment standards (ATSs), and notification requirements. Land disposal means placement in or on the land, except in a corrective action unit, and includes, but is not limited to, placement in a landfill, surface impoundment, waste pile, injection well, land treatment facility, salt dome formation, salt bed formation, underground mine or cave, or placement in a concrete vault, or bunker intended for disposal purposes. The other two components work in tandem with the disposal prohibition to guide the regulated community in proper hazardous waste management. The dilution prohibition ensures that wastes are properly treated, and the storage prohibition ensures that waste will not be stored indefinitely to avoid treatment. 

The purpose of the Dow Fire and Explosion Hazard Index (Dow, 1987) is to 1) quantify the expected damage of potential fire and explosion incidents in realistic terms, 2) identify equipment that would be likely to contribute to the creation or escalation of an incident and 3) communicate the fire and explosion risk potential to management. The Dow Index is the product of the Unit Hazard Factor and the Material Factor (Table 1). 

---