Fatty acids formulations

Dyerberg, J., Madsen, P., MoHer, J.M., Aardestrup, L, and Schmidt, E.B. (2010) Bioavadabihty of marine n-3 fatty acid formulations. Prosta and. Leukotr. Essent. Fatty Acids, 83,137—141. 

Additives acting on the pour point also modify the crystal size and, in addition, decrease the cohesive forces between crystals, allowing flow at lower temperatures. These additives are also copolymers containing vinyl esters, alkyl acrylates, or alkyl fumarates. In addition, formulations containing surfactants, such as the amides or fatty acid salts and long-chain dialkyl-amines, have an effect both on the cold filter plugging point and the pour point. 

Com oil s flavor, color, stabiHty, retained clarity at refrigerator temperatures, polyunsaturated fatty acid composition, and vitamin E content make it a premium vegetable oil. The major uses are frying or salad appHcations (50%) and margarine formulations (35%). 

Hlkanolamides. The fatty acid alkanolamides are used widely ia shampoo formulations as viscosity and lather builders. They are formed by the condensation of a fatty acid with a primary or secondary alkanolamine. The early amides were compositions of 2 1 alkanolamine to fatty acid. Available technology allows the formation of amides with a 1 1 ratio of these additives. These amides are classified as superamide types. The typical amide used ia shampoo preparations usually contains the mono- or diethanolamine adduct, eg, lauric diethanolamide [120-40-1] (see Amides, fatty acid). 

Many PVC stabilizer formulations also contain one or more organic costabilizers that can also absorb hydrogen chloride. Typical of these additives are epoxidized fatty acid esters and organophosphites ... 

Typically, soHd stabilizers utilize natural saturated fatty acid ligands with chain lengths of Cg—C g. Ziac stearate [557-05-1/, ziac neodecanoate [27253-29-8] calcium stearate [1592-23-0] barium stearate [6865-35-6] and cadmium laurate [2605-44-9] are some examples. To complete the package, the soHd products also contain other soHd additives such as polyols, antioxidants, and lubricants. Liquid stabilizers can make use of metal soaps of oleic acid, tall oil acids, 2-ethyl-hexanoic acid, octylphenol, and nonylphenol. Barium bis(nonylphenate) [41157-58-8] ziac 2-ethyIhexanoate [136-53-8], cadmium 2-ethyIhexanoate [2420-98-6], and overbased barium tallate [68855-79-8] are normally used ia the Hquid formulations along with solubilizers such as plasticizers, phosphites, and/or epoxidized oils. The majority of the Hquid barium—cadmium formulations rely on barium nonylphenate as the source of that metal. There are even some mixed metal stabilizers suppHed as pastes. The U.S. FDA approved calcium—zinc stabilizers are good examples because they contain a mixture of calcium stearate and ziac stearate suspended ia epoxidized soya oil. Table 4 shows examples of typical mixed metal stabilizers. 

Epo>y Compounds. Epoxidized soya oil (ESO) is the most widely used epoxy-type additive and is found ia most mixed metal stabilized PVC formulations at 1.0—3.0 phr due to its versatiHty and cost effectiveness. Other usefiil epoxy compounds are epoxidized glycerol monooleate, epoxidized linseed oil, and alkyl esters of epoxidized tall oil fatty acid. 

Emulsifiers are incorporated in oil and synthetic mud formulations to maintain a stable emulsion of the internal brine phase. These materials include calcium and magnesium soaps of fatty acids and polyamines and amides and their mixtures (123,127). The specific chemistry of these additives depends on the nature of the continuous phase of the mud, ie, whether diesel oil, mineral oil, or a synthetic Hquid. Lime is added along with the fatty acid to form the... 

Cosmetics and Personal Care Products. Alkanolamines ate important taw materials in the manufacture of creams (95—97), lotions, shampoos, soaps, and cosmetics. Soaps (98) formed from triethanolamine and fatty acids ate mild, with low alkalinity and excellent detergency. Triethanolamine lauryl sulfate is a common base for shampoos (99—101) and offers significant mildness over sodiumlauryl sulfate. Diethanolamine lauryl sulfate and fatty acid soaps of mono- and trietban olamine can also be used in shampoos and bubble bath formulations. Chemistry similar to that used in soluble oils and other emulsifiers is appUcable to cleansing creams and lotions (102,103). Alkanolamides or salts ate added to the shampoo base to give a smooth, dense foam (104). 

Emulsions. The fatty acid soaps of alkanolamines ate excellent emulsification agents for use in such products as floor poHshes, cosmetics, and functional fluids such as hydrauhc and metalworking fluids. For example, improved hardwater stabiUty of a hydrauhc fluid emulsion is obtained using AMP in the formulation (12). 

A fermented-egg product (EEP), patented as an attractive bait for synanthropic flies, has been shown to be attractive to coyotes and repeUent to deer (79). Its components are variable, with relative concentrations of 77% fatty acids, 13% bases, and 10% (primarily) neutrals composed of at least 54 volatiles such as ethyl esters, dimethyl disulfide, and 2-mercaptoethanol. Synthetic formulations have been evaluated to find a replacement for a patented fermented-egg protein product that attracts coyotes and repels deer. Ten aUphatic acids (C-2 to C-8), four amines (pentyl, hexyl, heptyl, and trimethyl), dimethyl disulfide, 2-mercaptoethanol, and 54 more volatiles (C-1 to C-5 esters of C-1 to C-8 acids) have been tested as synthetic fermented egg (SEE) (80) in approximately the same proportions that are present in EEP. Weathering was a problem that caused decreased efficacy, which suggests trials of controUed-release formulations. Eourteen repeUents have been examined against white-taU deer in Peimsylvania in choice tests when treated onto sheUed com (81). 

Soap Bars. In soap bars the primary surfactant is predominantly sodium salts of fatty acids. These products typically contain between 70 and 85% soap. Occasionally, potassium soap ( 5-30%) is included in the formulation to increase the solubiUty of the soap and, hence, the bar s lathering properties. The low Krafft temperatures for potassium soap are the basis for the lather enhancement, but also limits their content in bars. 

Emulsions of fatty- and petroleum-based substances, both oils and waxes, of the o/w type are made by using blends of sorbitan fatty esters and their poly(oxyethylene) derivatives. Mixtures of poly(oxyethylene(20)) sorbitan monostearate (Polysorbate 60) and sorbitan monostearate are typical examples of blends used for lotions and creams. Both sorbitan fatty acid esters and their poly(oxyethylene) derivatives are particularly advantageous in cosmetic uses because of their very low skin irritant properties. Sorbitan fatty ester emulsifiers for w/o emulsions of mineral oil are used in hair preparations of both the lotion and cream type. Poly(oxyethylene(20)) sorbitan monolaurate is useflil in shampoo formulations (see Hairpreparations). Poly(oxyethylene) sorbitan surfactants are also used for solubilization of essential oils in the preparation of colognes and after-shave lotions. 

Eatty acid ethoxylates are used extensively in the textile industry as emulsifiers for processing oils, antistatic agents (qv), softeners, and fiber lubricants, and as detergents in scouring operations. They also find appHcation as emulsifiers in cosmetic preparations and pesticide formulations. Eatty acid ethoxylates are manufactured either by alkaH-catalyzed reaction of fatty acids with ethylene oxide or by acid-catalyzed esterification of fatty acids with preformed poly(ethylene glycol). Deodorization steps are commonly incorporated into the manufacturing process. 

Castor esters have been found to be nonirritating and noncomedogenic to the skin. Cetyl ricinoleate was found to be an effective noncomedogenic moisturizer (118). Castor-based quaternaries prepared by reaction of a castor fatty acid and a tertiary diamine are used for hair care. The ricinoleic quaternium is incorporated into clear shampoo formulations for foam enhancement and conditioning (119,120). 

Alkyds. Alkyd resins (qv) are polyesters formed by the reaction of polybasic acids, unsaturated fatty acids, and polyhydric alcohols (see Alcohols, POLYHYDRic). Modified alkyds are made when epoxy, sUicone, urethane, or vinyl resins take part in this reaction. The resins cross-link by reaction with oxygen in the air, and carboxylate salts of cobalt, chromium, manganese, zinc, or zirconium are included in the formulation to catalyze drying. 

The solubihty characteristics of sodium acyl isethionates allow them to be used in synthetic detergent (syndet) bars. Complex blends of an isethionate and various soaps, free fatty acids, and small amounts of other surfactants reportedly are essentially nonirritant skin cleansers (66). As a rule, the more detersive surfactants, for example alkyl sulfates, a-olefin sulfonates, and alkylaryl sulfonates, are used in limited amounts in skin cleansers. Most skin cleansers are compounded to leave an emollient residue on the skin after rinsing with water. Free fatty acids, alkyl betaines, and some compatible cationic or quaternary compounds have been found to be especially useful. A mildly acidic environment on the skin helps control the growth of resident microbial species. Detergent-based skin cleansers can be formulated with abrasives to remove scaly or hard-to-remove materials from the skin. 

An oral dental riase geaeraHy coasists of water, alcohol, a humectant, an emulsifier, flavor, color, and an active agent. Water is the primary vehicle. The alcohol provides bite and is also a formulation aid. The humectant improves the feel ia the mouth and also prevents locking of the cap to the container between uses glycerin or noncrystaUiziag sorbitol may be satisfactory. The emulsifier is a nonionic type, for example, a polyoxyethylene—polyoxypropylene block copolymer or a polyoxyethylene sorbitan fatty acid ester. Flavors are generally a type of mint or cinnamon. Colors are FD C or D C. 

---