Chromatography HPLC

Practical inlet systems for attaching a high-pressure liquid chromatography (HPLC) column to a mass spectrometer utilize atmospheric-pressure ionization (see Chapters 8 and 11). 

A flow of liquid, for example from high-performance liquid chromatography (HPLC), is treated in such a way that most of the solvent evaporates to leave solute molecules that pass into an ionization region (ion source). 

High-pressure liquid chromatography (HPLC) is simply a variant on LC in which the moving liquid stream is forced along under high pressure to obtain greater efficiency of separation. 

Thin-Layer Chromatography. Chiral stationary phases have been used less extensively in tic as in high performance Hquid chromatography (hplc). This may, in large part, be due to lack of avakabiHty. The cost of many chiral selectors, as well as the accessibiHty and success of chiral additives, may have inhibited widespread commerciali2ation. Usually, nondestmctive visuali2ation of the sample spots in tic is accompHshed using iodine vapor, uv or fluorescence. However, the presence of the chiral selector in the stationary phase can mask the analyte and interfere with detection (43). 

High Performance Liquid Chromatography. Although chiral mobile phase additives have been used in high performance Hquid chromatography (hplc), the large amounts of solvent, thus chiral mobile phase additive, required to pre-equiUbrate the stationary phase renders this approach much less attractive than for dc and is not discussed here. 

Antioxidants (qv) have a positive effect on oils when present in the proper concentration. Sterols and tocopherols, which are natural antioxidants, may be analy2ed by gas-Hquid chromatography (glc), high performance Hquid chromatography (hplc), or thin-layer chromatography (tic). Synthetic antioxidants maybe added by processors to improve the performance or shelf life of products. These compounds include butylatedhydroxyanisole (BHA), butylated hydroxytoluene (BHT), / fZ-butyUiydroquinone (TBHQ), and propyl gallate. These materials may likewise be analy2ed by glc, hplc, or tic. Citric acid (qv), which functions as a metal chelator, may also be deterrnined by glc. 

Ref. 277 unless otherwise noted gc = gas chromatography hplc = high pressure Hquid chromatography ir = infrared spectroscopy uv = ultraviolet spectroscopy glc = ga sliquid chromatography eia = enzyme immunoassay vis = visible spectroscopy. 

The total phosphoms content of the sample is determined by method AOCS Ja 5-55. Analysis of phosphoUpid in lecithin concentrates (AOCS Ja 7-86) is performed by fractionation with two-dimensional thin-layer chromatography (tic) followed by acid digestion and reaction with molybdate to measure total phosphorous for each fraction at 310 nm. It is a semiquantitative method for PC, PE, PI, PA, LPC, and LPE. Method AOCS Ja 7b-91 is for the direct deterrnination of single phosphoHpids PE, PA, PI, PC in lecithin by high performance Hquid chromatography (hplc). The method is appHcable to oil-containing lecithins, deoiled lecithins, lecithin fractions, but not appHcable to lyso-PC and lyso-PE. 

Several new oxalates have been developed for use ia analytical appHcations. Bis(2,6-difluorophenyl) oxalate (72) and bis(4-nitro-2-(3,6,9-trioxadecylcarbonyl)phenyl) oxalate (97) have been used ia flow iajection and high performance Hquid chromatography (hplc) as activators for chemiluminescence detectors. These oxalates are generally more stable and show better water solubiUty ia mixed aqueous solvents yet retain the higher efficiencies ( ) of the traditional oxalates employed for chemiluminescence. 

High performance Hquid chromatography (hplc) may be used to determine nitroparaffins by utilizing a standard uv detector at 254 nm. This method is particularly appHcable to small amounts of nitroparaffins present, eg, in nitro alcohols (qv), which caimot be analyzed easily by gas chromatography. Suitable methods for monitoring and deterrnination of airborne nitromethane, nitroethane, and 2-nitropropane have been pubUshed by the National Institute of Occupational Safety and Health (NIOSH) (97). Ordinary sorbant tubes containing charcoal are unsatisfactory, because the nitroparaffins decompose on it unless the tubes are held in dry ice and analyzed as soon after collection as possible. 

Instmmental methods of analysis provide information about the specific composition and purity of the amines. QuaUtative information about the identity of the product (functional groups present) and quantitative analysis (amount of various components such as nitrile, amide, acid, and deterruination of unsaturation) can be obtained by infrared analysis. Gas chromatography (gc), with a Hquid phase of either Apiezon grease or Carbowax, and high performance Hquid chromatography (hplc), using siHca columns and solvent systems such as isooctane, methyl tert-huty ether, tetrahydrofuran, and methanol, are used for quantitative analysis of fatty amine mixtures. Nuclear magnetic resonance spectroscopy (nmr), both proton ( H) and carbon-13 ( C), which can be used for quaHtative and quantitative analysis, is an important method used to analyze fatty amines (8,81). 

Bonded Phases. Substrate-bond hydrocarbon coatings for high pressure Hquid chromatography (hplc) and flash chromatography are prepared from octyltrialkoxysilanes and other long-chain alkyltrialkoxysilanes (see Chromatography). 

Mixtures can be identified with the help of computer software that subtracts the spectra of pure compounds from that of the sample. For complex mixtures, fractionation may be needed as part of the analysis. Commercial instmments are available that combine ftir, as a detector, with a separation technique such as gas chromatography (gc), high performance Hquid chromatography (hplc), or supercritical fluid chromatography (96,97). Instmments such as gc/ftir are often termed hyphenated instmments (98). Pyrolyzer (99) and thermogravimetric analysis (tga) instmmentation can also be combined with ftir for monitoring pyrolysis and oxidation processes (100) (see Analytical methods, hyphenated instruments). 

The appHcation of modem methods of analyses such as gc, low ionization voltage mass spectrometry, high pressure Hquid chromatography (hplc), and nmr has greatly increased knowledge of coal-tar composition without materially altering the quaHtative picture. 

Tar. Before the development of gas chromatography (gc) and high pressure Hquid chromatography (hplc), the quantitative analyses of tar distillate oils involved tedious high efficiency fractionation and refractionation, followed by identification or estimation of individual components by ir or uv spectroscopy. In the 1990s, the main components of the distillate fractions of coal tars are deterrnined by gc and hplc (54). The analytical procedures included in the specifications for tar bulk products are given in the relevant Standardi2ation of Tar Products Tests Committee (STPTC) (33), ISO (55), and ASTM (35) standards. 

---