Liquid chromatography HPLC

Practical inlet systems for attaching a high-pressure liquid chromatography (HPLC) column to a mass spectrometer utilize atmospheric-pressure ionization (see Chapters 8 and 11). 

A flow of liquid, for example from high-performance liquid chromatography (HPLC), is treated in such a way that most of the solvent evaporates to leave solute molecules that pass into an ionization region (ion source). 

High-pressure liquid chromatography (HPLC) is simply a variant on LC in which the moving liquid stream is forced along under high pressure to obtain greater efficiency of separation. 

Typically, quantitative protein determination is done on the one hand by colorimetric or nephelometric methods, on the other hand for more difficult analytical problems by more sophisticated techniques such as high performance liquid chromatography (HPLC), gel-electrophoresis and immunoassay. However, these methods are tedious, time-consuming and expensive. 

In 1972, Kirkland at E. I. du Pont de Nemours patented porous silica microspheres (PSM) specifically for high-performance liquid chromatography (HPLC) applications (3). Prior to this development, silica particles used for chromatographic applications were simply adapted from some other use. In the 1970s, Kirkland showed that porous silica particles could be used for size-... 

Connect the column to the high-performance liquid chromatography (HPLC) system in the reverse flow direction. 

For further information, see the Shodex home pages (http // www.sdk.co.jp/shodex), comprising more than 2500 pages of technical data on high-performance liquid chromatography (HPLC). Anyone can obtain relevant information from the home pages whenever they have questions about HPLC. 

Most high-performance liquid chromatography (HPLC) pumps can be used in HOPC. The back pressure rating should be at least several thousand pounds per square inch (a few hundred kg/cm ). A type of pump that does not allow bypassing the pressure transducer or a pulse damper, if it is installed, must not be used. The dead volume should be as small as possible. Pumps with a single plunger are better than those with two plungers. 

High performance liquid chromatography (HPLC) is an excellent technique for sample preseparation prior to GC injection since the separation efficiency is high, analysis time is short, and method development is easy. An LC-GC system could be fully automated and the selectivity characteristics of both the mobile and stationary... 

Hish-Pressure/Medium-Pressure Liquid Chromatography (HPLC/MPLC)... 

Despite the difficulties caused by the rapidly expanding literature, the use of chiral stationary phases (CSPs) as the method of choice for analysis or preparation of enantiomers is today well established and has become almost routine. It results from the development of chiral chromatographic methods that more than 1000 chiral stationary phases exemplified by several thousands of enantiomer separations have been described for high-performance liquid chromatography (HPLC). 

Purification of poloxamers has been extensively investigated due to their use in medical applications, the intention often being to remove potentially toxic components. Supercritical fluid fractionation and liquid fractionation have been used successfully to remove low-molecular weight impurities and antioxidants from poloxamers. Gel filtration, high-performance liquid chromatography (HPLC), and ultrafiltration through membranes are among the other techniques examined [5]. 

Acetonitrile and hydrogen cyanide are hy-products that may he recovered for sale. Acetonitrile (CH3CN) is a high polarity aprotic solvent used in DNA synthesizers, high performance liquid chromatography (HPLC), and electrochemistry. It is an important solvent for extracting butadiene from C4 streams. Table 8-1 shows the specifications of acrylonitrile, HCN, and acetonitrile. ... 

High-pressure liquid chromatography (HPLC) is a variant of the simple column technique, based on the discovery that chromatographic separations are vastly improved if the stationary phase is made up of very small, uniformly sized spherical particles. Small particle size ensures a large surface area for better adsorption, and a uniform spherical shape allows a tight, uniform packing of particles. In practice, coated Si02 microspheres of 3.5 to 5 fxm diameter are often used. 

---