Acid digestions

Phosphorus has been determined [15, 16] in thermally stable polymers by mineralisation with a nitric-perchloric acid mixture and subsequent titration with lanthanum nitrate or by photometric determination of the phosphomolybdic blue complex [17] (see Method 2.9 at the end of this chapter). 

---

A web-site dedicated to sample preparation, which contains useft information about acid digestion and microwave digestion, is found at... 

Methods for iodine deterrnination in foods using colorimetry (95,96), ion-selective electrodes (94,97), micro acid digestion methods (98), and gas chromatography (99) suffer some limitations such as potential interferences, possibHity of contamination, and loss during analysis. More recendy neutron activation analysis, which is probably the most sensitive analytical technique for determining iodine, has also been used (100—102). 

Opa.nte. There are two methods used at various plants in Russia for loparite concentrate processing (12). The chlorination technique is carried out using gaseous chlorine at 800°C in the presence of carbon. The volatile chlorides are then separated from the calcium—sodium—rare-earth fused chloride, and the resultant cake dissolved in water. Alternatively, sulfuric acid digestion may be carried out using 85% sulfuric acid at 150—200°C in the presence of ammonium sulfate. The ensuing product is leached with water, while the double sulfates of the rare earths remain in the residue. The titanium, tantalum, and niobium sulfates transfer into the solution. The residue is converted to rare-earth carbonate, and then dissolved into nitric acid. 

The total phosphoms content of the sample is determined by method AOCS Ja 5-55. Analysis of phosphoUpid in lecithin concentrates (AOCS Ja 7-86) is performed by fractionation with two-dimensional thin-layer chromatography (tic) followed by acid digestion and reaction with molybdate to measure total phosphorous for each fraction at 310 nm. It is a semiquantitative method for PC, PE, PI, PA, LPC, and LPE. Method AOCS Ja 7b-91 is for the direct deterrnination of single phosphoHpids PE, PA, PI, PC in lecithin by high performance Hquid chromatography (hplc). The method is appHcable to oil-containing lecithins, deoiled lecithins, lecithin fractions, but not appHcable to lyso-PC and lyso-PE. 

There are three basic methods of converting poUucite to cesium metal or compounds direct reduction with metals decomposition with bases and acid digestion. In each case grinding of the ore to 75 p.m precedes conversion. 

Hydrochloric acid digestion takes place at elevated temperatures and produces a solution of the mixed chlorides of cesium, aluminum, and other alkah metals separated from the sUiceous residue by filtration. The impure cesium chloride can be purified as cesium chloride double salts such as cesium antimony chloride [14590-08-0] 4CsCl SbCl, cesium iodine chloride [15605 2-2], CS2CI2I, or cesium hexachlorocerate [19153 4-7] Cs2[CeClg] (26). Such salts are recrystaUized and the purified double salts decomposed to cesium chloride by hydrolysis, or precipitated with hydrogen sulfide. Alternatively, solvent extraction of cesium chloride direct from the hydrochloric acid leach Hquor can be used. 

Ferric ammonium ferrocyanide—The blue pigment obtained by oxidising under acidic conditions with sodium dichromate the acid-digested precipitate resulting from mixing solutions of ferrous sulfate and sodium ferrocyanide ia the presence of ammonium sulfate. The oxidized product is filtered, washed, and dried. The pigment consists principally of ferric ammonium ferrocyanide with small amounts of ferric ferrocyanide and ferric sodium ferrocyanide. 

On homogenization, the lysate may drastically increase in viscosity due to DNA release. This can be ameliorated to some extent using multiple passes to reduce the viscosity. Alternatively, precipitants or nucleic acid digesting enzymes can be used to remove these viscosity-enhancing contaminants. 

The most universal method for sample destmction before SPh metal determination (Ee, Mo, A1 and etc.) is the sulfur acid digestion at high temperature by Kjeldall. It can be enforced by microwave decomposition in the microwave oven. 

Phosphorus and Silicon in Waters, Effluents and Sludges [e.g. Phosphorus in Waters, Effluents and Sludges by Spectrophotometry-phosphomolybdenum blue method. Phosphorus in Waters and Acidic Digests by Spectrophotometry-phosphovanadomolybdate method. Ion Chromatographic Methods for the Determination of Phosphorus Compound, Pretreatment Methods for Phosphorus Determinations, Determination of silicon by Spectrophotometric Determination of Molybdate Reactive Silicon-1 -amino-2-naphthol-4, sulphonic acid (ANSA) or Metol reduction methods or ascorbic acid reduction method. Pretreatment Methods to Convert Other Eorms of Silicon to Soluble Molybdate Reactive Silicon, Determination of Phosphorus and Silicon Emission Spectrophotometry], 1992... 

Furfural is a natural monomer obtained by the steam acid digestion of corncobs, bagasse, rice husks, oat hulls, or similar materials. It acts as the precursor for the preparation of two important monomers (Scheme 1), adipic acid and hexamethylene diamine, used in the... 

Prior to the evaluation of Li[Mn2]04 as a rechargeable cathode material, the ideal spinel framework [Mn2]04, (commonly referred to as A — Mn02, after Hunter) was chemically synthesized by acid digestion of Li[Mn2]04 [121]. The formation of A— Mn02 by chemical methods differs from the electrochemical reaction because it dissolves 25 percent of the Mn cations from the original spinel framework ... 

Destructive techniques have been widely applied to determine the concentration of key elements In cells and other biota, but beside being Incapable of use in vivo, they offer no Information on the chemical nature of the element In question. For example, acid digestion of cells which have accumulated various organotln species, and subsequent traditional analysis by atomic absorption (AA) spectroscopy or element-specific spectrofluorlmetry, will produce quantitative data on the amount of tin present, but will reveal nothing about the coordination environment of the metal on the cell surface prior to destruction. 

Known concentrations of Sn solutions were spiked Into acid digested samples of Ps. 244 which had been exposed to 10 ppm solutions of Bu Sn (x = 0,1,2,3). Atomic absorption analysis of these samples allowed for the calculation of the amount of tin accumulated on the cell by the method of multiple additions Q6). 

Determined by inductively coupled plasma-mass spectrometry of acid digested catalyst samples Calculated from X-ray diffraction peak broadening at (101) foranatase and (110) formtile TiOa Mean particle diameter measured from transmission electron microscopy pictures of gold catalysts... 

RAVINDRAN V, CABAHUG s, RAVINDRAN G, BRYDEN w L (1999) Inflnence of microhial ph)dase on apparent ileal amino acid digestibility of feedstuff s for hroUers. Poult Sci. 78 699-706. 

Minimal pretreatment such as pelletizing, briquetting, grinding Acid digestion/dissolution in open vessels (atmospheric pressure)... 

Munoz O, Velez D, Montoro R (1999) Optimization of the solubilization, extraction and determination of inorganic arsenic [As(III) i- As(V)] in seafood products by acid digestion, solvent extraction and hydride generation atomic absorption spectrometry. Analyst 124 601-607. 

While additive analysis of polyamides is usually carried out by dissolution in HFIP and hydrolysis in 6N HC1, polyphthalamides (PPAs) are quite insoluble in many solvents and very resistant to hydrolysis. The highly thermally stable PPAs can be adequately hydrolysed by means of high pressure microwave acid digestion (at 140-180 °C) in 10 mL Teflon vessels. This procedure allows simultaneous analysis of polymer composition and additives [643]. Also the polymer, oligomer and additive composition of polycarbonates can be examined after hydrolysis. However, it is necessary to optimise the reaction conditions in order to avoid degradation of bisphenol A. In the procedures for the analysis of dialkyltin stabilisers in PVC, described by Udris [644], in some instances the methods can be put on a quantitative basis, e.g. the GC determination of alcohols produced by hydrolysis of ester groups. 

---